| Quantity: | |
|---|---|
15 Degree Stainless Steel Screw Shank Coil Nails 1-1/4 in. x 0.090 in. are wire-collated coil nails designed for exterior siding, cedar siding, fiber cement siding, fencing, sheathing, pallet making and construction fastening. Made from 304 stainless steel, these nails provide strong corrosion resistance in humid, coastal and weather-exposed environments where ordinary bright or galvanized fasteners may stain, rust or fail prematurely.
The 1-1/4 inch length and 0.090 inch shank diameter make this coil nail suitable for siding and light construction applications. The screw shank helps improve holding power, reduce back-out and grip hardwoods or dense substrates more securely. The 15 degree wire-collated coil format is designed for compatible 15 degree coil siding nailers and coil nailers.
KYA Fasteners supplies stainless steel coil nails in 304 and 316 stainless steel, with screw shank, ring shank and smooth shank options. Custom sizes, packing, head types, point types and finish options are available for distributors, contractors, siding installers, pallet factories and industrial fastener buyers.
304 stainless steel provides strong corrosion resistance for exterior and humid applications.
316 stainless steel is available for coastal, marine and high-corrosion environments.
Screw shank design helps improve holding power and reduce nail back-out.
15 degree wire-collated coil format fits compatible 15 degree coil siding nailers and coil nailers.
1-1/4 inch length and 0.090 inch shank diameter are suitable for siding, sheathing and fencing applications.
Full round head provides secure fastening and better surface holding.
Ideal for cedar, fiber cement siding, fencing, pallet making and exterior construction.
Packing supports 150–400 nails per coil and 30–35 coils per carton.
Custom length, shank diameter, head type, point type, finish and packaging are available.
| Specification | Details |
|---|---|
| Product Name | 15 Degree Stainless Steel Screw Shank Coil Nails |
| Featured Size | 1-1/4 in. x 0.090 in. |
| Material | 304 Stainless Steel, 316 Stainless Steel Available |
| Length Range | 1-1/4" to 4" / 1-1/4", 1-1/2", 1-3/4", 1-7/8", 2", 2-1/4", 2-3/8", 2-1/2", 3", 3-1/4", 3-1/2" |
| Shank Diameter Range | 0.082" / 2.1mm, 0.090" / 2.3mm, 0.099" / 2.5mm, 0.113" / 2.87mm, 0.120" / 3.1mm, 0.131" / 3.33mm, 0.148" / 3.76mm, 0.150" / 3.81mm |
| Head Diameter | 5mm - 10mm |
| Shank Type | Screw, Ring, Smooth |
| Head Type | Flat, Checked, Mesh |
| Point Type | Countersunk, Checkered Head, Diamond, Chisel, Cut, Round |
| Collation Angle | 15 Degrees |
| Collation Type | Wire Collated Coil Nails |
| Finish Options | 304/316 Stainless Steel, Bright, Galvanized, Hot Dipped Galvanized, Yellow Painting |
| Packing | 150-400 nails/coil, 30-35 coils/carton, customizable |
| Delivery Time | 20-30 days after deposit |
| Main Applications | Cedar siding, fiber cement siding, fencing, sheathing, ply bracing, pallet making, construction, underlayments, cabinet frames and furniture frames |
These 15 Degree Stainless Steel Screw Shank Coil Nails are optimized for durable fastening in harsh environments. Contact KYA Fasteners for bulk orders, 304 or 316 stainless steel options, tool compatibility checks, sample testing and custom packaging.
15 degree stainless steel screw shank coil nails are used where corrosion resistance and holding power are both important. They are especially suitable for exterior siding, cedar wood, fiber cement boards, coastal projects, humid environments, hardwood fastening and construction jobs where long-term durability matters.
Cedar siding and wood siding
Fiber cement siding and cement board siding
Sheathing and ply bracing
Fencing fixation and exterior wood fastening
Timber framing and softer pine framing
Composition roofing and underlayments
Cabinet frames and furniture frames
Pallet making, crate assembly and industrial wood packaging
Coastal, humid and weather-exposed construction projects
Explore Related Wire Coil Nails
| Requirement | Stainless Steel Coil Nail Advantage |
|---|---|
| Corrosion Resistance | 304 stainless steel resists rust better than common bright, EG or many basic coated fasteners. |
| Coastal Use | 316 stainless steel is available for salt-air, coastal and high-corrosion environments. |
| Cedar Siding | Helps reduce black streaking, staining and corrosion marks on cedar siding and fences. |
| Fiber Cement Siding | Provides durable fastening for fiber cement board and exterior siding applications. |
| Holding Power | Screw shank design improves grip and helps reduce loosening in dense materials. |
| Production Efficiency | Wire coil collation allows fast fastening with compatible 15 degree coil nailers. |
| Shank Type | Recommended Use | Main Benefit |
|---|---|---|
| Smooth Shank | General framing, light construction and soft wood fastening. | Fast driving and general-purpose holding power. |
| Ring Shank | Siding, sheathing, fencing and applications requiring stronger pull-out resistance. | Improves holding power in softwood and panel materials. |
| Screw Shank | Hardwood, dense wood, pallets, crates and applications requiring reduced back-out. | Spins during driving and creates a tighter grip in the material. |
| Annular Thread Shank | Wood and sheet materials requiring enhanced grip. | Beveled rings help resist pull-out and improve fastening strength. |
| Finish | Recommended Use |
|---|---|
| Bright Finish | Dry indoor framing, trim and temporary applications where corrosion protection is not required. |
| Electro Galvanized EG | Indoor or light-duty applications requiring basic zinc protection. |
| Hot Dipped Galvanized HDG | Outdoor construction applications requiring stronger zinc coating protection. |
| 304 Stainless Steel | Exterior siding, cedar, fiber cement, humid environments and long-service construction use. |
| 316 Stainless Steel | Coastal, marine, salt-air and high-corrosion environments. |
| Buyer Concern | Recommended Check |
|---|---|
| Nailer Compatibility | Confirm the nailer supports 15 degree wire-collated coil nails, 1-1/4 inch length and 0.090 inch shank diameter. |
| Material Grade | Choose 304 stainless steel for general exterior work and 316 stainless steel for coastal or high-corrosion environments. |
| Shank Type | Use screw shank for dense materials and stronger grip, ring shank for pull-out resistance, and smooth shank for general fastening. |
| Application Material | Test performance in cedar, fiber cement board, plywood, hardwood, pine, pallet lumber or fencing material before bulk order. |
| Packing Requirement | Confirm nails/coil, coils/carton, carton weight, pallet packing, private-label packaging and shipping mark requirements. |
| Delivery Time | Standard delivery time is 20-30 days after deposit, depending on order quantity and customization requirements. |
| Material | Best Use | Selection Note |
|---|---|---|
| 304 Stainless Steel | Cedar siding, fiber cement siding, fencing, sheathing, humid outdoor work and general exterior construction. | Good balance of corrosion resistance and cost for most exterior applications. |
| 316 Stainless Steel | Coastal areas, marine environments, salt-air exposure and high-corrosion construction projects. | Recommended when corrosion risk is higher and long-term appearance is critical. |
KYA Fasteners supplies stainless steel coil nails, wire coil nails, roofing nails, siding nails, pallet nails, fencing nails, pneumatic nailers and industrial fasteners for global buyers. For distributors, siding contractors, construction suppliers, pallet factories and OEM packaging buyers, KYA can support size selection, shank selection, material grade selection, sample testing, bulk supply and custom packing.
Factory supply for 15 degree stainless steel screw shank coil nails.
304 and 316 stainless steel options available.
Custom lengths, shank diameters, shank types, head types and point types available.
Bulk order support for siding, fencing, pallet, sheathing and construction applications.
Custom carton packing, pallet packing, private-label packaging and export shipping support.
They are used for cedar siding, fiber cement siding, fencing, sheathing, ply bracing, timber framing, construction, underlayments, cabinet frames, furniture frames, pallet making and crate assembly.
Stainless steel helps prevent rust staining and black streaks on cedar siding and fences. It is a better choice for long-term exterior appearance and corrosion resistance.
A screw shank nail rotates as it is driven, creating a tighter grip in the material. This helps improve holding power and reduce back-out, especially in hardwoods, pallets and dense wood.
The featured size is 1-1/4 inch length with a 0.090 inch shank diameter. KYA also supplies other lengths and shank diameters for different applications.
The standard option is 304 stainless steel, and 316 stainless steel is available for coastal, marine or high-corrosion environments.
These nails are designed for compatible 15 degree wire-collated coil nailers. Confirm nail length, shank diameter, collation angle, wire collation and magazine specification before ordering.
Standard packing is 150-400 nails per coil and 30-35 coils per carton. Custom packing, carton labels and pallet packing are available.
Yes. Stainless steel coil nails are commonly used for fiber cement siding and cement board siding where corrosion resistance and long-term fastening performance are required.
Yes. KYA can customize nail length, shank diameter, shank type, head type, point type, material grade, packing and carton labels according to buyer requirements.
