| Length: | |
|---|---|
| Quantity: | |
KYA 15 Gauge Polymer Composite F Brad Nails are non-metal finish fasteners designed for professional woodworking, cabinetry, trim, furniture, boatbuilding, composites and other applications where conventional steel nails may create corrosion, metal-contamination or downstream machining concerns.
The F15 Series uses an approximately 3.0mm head and 1.8mm fastener thickness, with available lengths of 19mm, 25mm and 32mm. All listed models use polymer composite construction and a smooth shank.
These fasteners are intended for compatible 15 gauge polymer composite finish nailers. Standard steel-nail finish nailers should not be assumed to accept polymer F15 nails solely because they use the same nominal gauge.
| Specification | Details |
| Product | 15 Gauge Polymer Composite F Brad Nails / Finish Nails |
| Series | F15 |
| Gauge | 15 Gauge |
| Material | Polymer Composite |
| Head Width | Approx. 3.0mm |
| Fastener Thickness | Approx. 1.8mm |
| Available Lengths | 19mm, 25mm, 32mm |
| Inch Lengths | Approx. 3/4", 1", 1-1/4" |
| Shank | Smooth |
| Fastener Type | Straight-Strip Polymer Composite Finish Nail |
| Electrical Property | Non-Conductive Polymer Composite |
| Standard Packing | 2,000 pcs/box |
| Compatible Tool Class | 15GA Polymer Composite Finish Nailers |
| Typical Applications | Cabinetry, Trim, Furniture, CNC Fixturing, PVC Millwork, Boatbuilding, Fiberglass, Casegoods and Casket Manufacturing |
Tool compatibility must be verified by the complete fastener profile and magazine specification. A conventional 15 gauge or 16 gauge steel finish nailer should not automatically be used with polymer composite finish nails.
| Model | Head | Thickness | Length | Approx. Inch | Pcs/Box | Boxes/Carton |
|---|---|---|---|---|---|---|
| F15-19 | 3.0mm | 1.8mm | 19mm | 3/4" | 2,000 | 32 |
| F15-25 | 3.0mm | 1.8mm | 25mm | 1" | 2,000 | 32 |
| F15-32 | 3.0mm | 1.8mm | 32mm | 1-1/4" | 2,000 | 16 |
The F15 Series uses an approximately 3.0mm head. This provides a defined bearing surface while maintaining a relatively compact finish-nail profile for trim, cabinet, furniture and composite applications.
RAPTOR's comparable F/15 composite finish nail family also uses an approximately 3.0mm / 1/8-inch head profile, confirming this dimension as a recognized format in professional polymer finish-nail systems.
KYA lists an approximately 1.8mm fastener thickness for the F15 Series. The larger profile provides a more substantial polymer fastener than lighter-gauge composite brads and pins.
Cross-section and head geometry are important for tool compatibility. Two fasteners labeled 15 gauge may still require different magazines or drivers.
These F15 finish nails are made from polymer composite material rather than conventional steel. They therefore do not introduce a normal metallic nail into the finished component.
This can be useful in woodworking, composite manufacturing, CNC workholding and marine production where hidden metal fasteners may interfere with machining, inspection or corrosion requirements.
Polymer composite fasteners are non-metal and non-conductive. This can be useful where electrical conductivity from a conventional steel nail is undesirable.
For electrical or safety-critical applications, evaluate the complete installed assembly according to the project requirements rather than relying solely on the fastener material.
Because the fastener body is polymer composite, it does not develop conventional steel rust or produce rust staining associated with untreated carbon-steel finish nails.
Suitability for outdoor, marine, chemical or elevated-temperature environments still depends on the exact polymer grade, substrate and complete service conditions.
Polymer composite finish nails are commonly selected where the fastened workpiece may later be cut, routed, sanded, shaped or planed.
Unlike hidden steel nails, polymer fasteners can be processed together with compatible wood, PVC and composite materials. This is particularly useful in CNC fixturing, cabinetry, millwork and fabrication processes.
Cutting-tool compatibility still depends on the polymer grade and tooling. Some polymer grades are more suitable for carbide tooling than high-speed steel knives, so production testing is recommended when tooling protection is critical.
F15 polymer composite finish nails require a nailer designed for the polymer fastener profile. Current industry systems include dedicated composite finish nailers rather than conventional steel-nail finish tools.
| Tool | Compatibility Reference |
|---|---|
| Spotnails CB1538C | Designed for 15GA composite finish nails from 1/2" to 1-1/2", including F15-19, F15-25 and F15-32 formats. |
| OMER B17P.763 | Dedicated polymer composite finish nailer for RAPTOR F/15 and equivalent fastener classes. |
| OMER 17P.32 | Referenced by Spotnails for compatible 15GA composite finish nails. |
| Senco SPFN15XP | Referenced polymer composite finish-nailer system for F15 fasteners. |
| Red Hawk FN15S | Referenced by Spotnails for the same general 15GA composite finish-nail class. |
Do not substitute a conventional steel finish nailer without confirming that it is specifically designed for the polymer composite nail profile. Magazine geometry, nail cross-section, head shape and driver dimensions must all match.
All three KYA models share the same listed 3.0mm head and 1.8mm thickness. The main difference is penetration length.
| Model | Length | Selection Consideration |
|---|---|---|
| F15-19 | 19mm / Approx. 3/4" | Shorter penetration for compatible trim, tagging and thinner components. |
| F15-25 | 25mm / 1" | General cabinetry, furniture, trim and fabrication where approximately 25mm length is appropriate. |
| F15-32 | 32mm / Approx. 1-1/4" | Longer penetration for compatible thicker components and production applications. |
The correct length depends on workpiece thickness, substrate, required penetration and the operating range of the composite nailer. A longer nail should not automatically be considered stronger or more suitable.
Cabinetry and cabinet components
Decorative trim
Furniture manufacturing
PVC millwork and trim
CNC fixturing and spoilboard workholding
Window and door components
Boatbuilding
Fiberglass lay-up
Composite manufacturing
Casket manufacturing
Casegoods
Woodworking and millwork
Polymer finish nails are useful in cabinet and trim production where components may later be routed, sanded, cut or shaped.
The non-metal fastener can reduce the risks associated with accidentally encountering a hidden steel nail during later fabrication. Select nail length according to the actual joint and substrate.
Dedicated polymer composite finish-nail systems are also used for temporary CNC workholding and spoilboard fixturing. The non-metal fastener can be machined through more safely than conventional steel screws or nails when the fastener grade and cutting tools are compatible.
Fixture strength, cutter type and cutting path should be tested before production. Polymer nails should not replace engineered clamps where the workholding load requires a different securing method.
Polymer composite finish nails can be used in selected boatbuilding and fiberglass fabrication processes where leaving a conventional steel nail in the assembly is undesirable.
Compatibility depends on laminate construction, resin system, core material and production process. Test the selected fastener in the actual composite system before volume use.
| Buyer Check | F15 Reference |
|---|---|
| Gauge | 15 Gauge |
| Head Width | Approx. 3.0mm |
| Thickness | Approx. 1.8mm |
| Length | 19mm, 25mm or 32mm |
| Material | Polymer Composite |
| Tool | Dedicated 15GA polymer composite finish nailer |
| Substrate | Test penetration and holding performance in the actual material. |
| Machining | Confirm polymer grade and cutting-tool compatibility before production. |
| Model | Pcs/Box | Boxes/Carton | Carton Size |
|---|---|---|---|
| F15-19 | 2,000 | 32 | Approx. 35.5 × 25.5 × 13.5cm |
| F15-25 | 2,000 | 32 | Approx. 35.5 × 25.5 × 13.5cm |
| F15-32 | 2,000 | 16 | Approx. 34.5 × 17.5 × 13.5cm |
KYA supplies polymer composite finish nails for cabinet manufacturers, woodworking factories, CNC users, PVC fabricators, boat builders, composite manufacturers and fastener distributors.
Custom length, head, color and packaging requirements can be discussed for bulk orders. Provide the exact composite nailer model, application, required dimensions and purchasing quantity when requesting a quotation.
KYA supplies polymer composite finish nails, brad nails and other non-metal fastening products in multiple sizes for professional woodworking, fabrication and composite applications.
KYA lists F15-19 at 19mm, F15-25 at 25mm and F15-32 at 32mm.
The listed head width is approximately 3.0mm.
KYA lists an approximately 1.8mm fastener thickness for the F15 Series.
No. The fastener body is polymer composite rather than conventional steel.
The polymer nail itself does not develop conventional steel rust because it does not use a steel nail body.
Polymer composite finish nails are commonly designed for workpieces that may later be sawed, routed, sanded or planed. Validate the exact polymer grade with the intended cutting tools before production.
No absolute guarantee should be assumed. Polymer fasteners reduce the hazards associated with hidden steel nails, but tool performance depends on the polymer grade, blade material and machining conditions.
Yes. Dedicated polymer composite finish-nail systems are used for CNC fixturing and spoilboard workholding. Verify holding strength and toolpath requirements for the actual workpiece.
Yes. Cabinetry, furniture, decorative trim and millwork are common applications for compatible polymer composite finish-nail systems.
No. The correct nail length depends on trim thickness, receiving substrate, required penetration and the nailer's operating range.
Yes. Boatbuilding and composite fabrication are common polymer finish-nail applications. Test compatibility with the actual substrate, resin and assembly process.
Polymer finish nails primarily provide mechanical fastening. Some composite fastener systems can develop additional interaction with the substrate during driving, but joint performance depends on the polymer grade, substrate and installation conditions.
The nail itself is non-metal polymer composite. Metal-detector sensitivity and the rest of the finished product vary, so detection-sensitive applications should be validated with the actual inspection system.
The Bostitch BTFP71917 is a conventional 16 gauge finish nailer and should not be treated as a compatible tool for this 15 gauge polymer composite F15 nail series.
The Hitachi NT65M2S is a conventional 16 gauge straight finish nailer. It should not be treated as a compatible polymer F15 nailer.
The FinishPro 42XP is designed around 15 gauge 34-degree DA angled finish nails. Use a dedicated polymer composite finish nailer for the F15 straight-strip polymer system.
Industry references include Spotnails CB1538C, OMER B17P.763, OMER 17P.32, Senco SPFN15XP and Red Hawk FN15S. Confirm the exact fastener specification before ordering.
KYA lists 2,000 nails per box for F15-19, F15-25 and F15-32.
Custom length, head, color and packaging requirements can be discussed for bulk orders. Provide the application, nailer model and required dimensions when requesting a quotation.
