| Material: | |
|---|---|
| Finish: | |
| Point: | |
| Quantity: | |
KYA SR15 D Rings are 15 gauge galvanized steel hog rings designed for professional fastening in automotive seating, furniture upholstery, bedding, fencing, wire cages, bag closure, netting and other wire or fabric connection applications.
KYA lists the SR15 with a 3/4-inch size, approximately 1.8mm wire and a 1/4-inch closed inside diameter. Sharp-point and blunt-point versions are available to match different piercing and handling requirements.
The galvanized steel surface provides corrosion protection for general industrial use. For continuously wet, coastal, chemically exposed or other corrosion-sensitive environments, confirm whether galvanized steel or an alternative stainless steel or zinc-aluminum option is required.
| Specification | Details |
| Product | 15GA SR15 Galvanized D Rings |
| Model | SR15 |
| Ring Style | D-Shaped Hog Ring |
| Wire Gauge | 15 Gauge |
| Wire Diameter | Approx. 1.8mm / 0.070" |
| KYA Listed Size | 3/4" |
| Closed Inside Diameter | Approx. 1/4" / 6.4mm |
| Material | Galvanized Steel |
| Point Options | Sharp Point or Blunt Point |
| Packing | 10,000 pcs/carton |
| Typical Applications | Automotive Seating, Upholstery, Bedding, Fencing, Wire Cages, Bag Closure, Netting |
SR15 terminology can vary between fastener and pneumatic-tool manufacturers. KYA currently lists its SR15 as a 3/4-inch D ring with a 1/4-inch closed inside diameter and 1.8mm wire.
Some Stanley SR15-compatible tool specifications describe the same general fastener class as approximately 22mm / 7/8 inch crown width with a 19mm / 3/4 inch open-ring size. For replacement orders, buyers should therefore match the actual ring dimensions, wire diameter, closure size and tool model instead of relying only on the SR15 or 3/4-inch designation.
SR15 D Rings use approximately 1.8mm diameter wire, corresponding to the common 15 gauge D-ring size class. This heavier wire is designed for applications requiring a formed ring connection around wire, fabric, springs, mesh, cord or other compatible materials.
The final holding performance depends on ring material, closure diameter, application material, tool jaw geometry and installation conditions. For load-critical assemblies, test the complete connection under the intended service conditions.
| Point Type | Typical Selection Consideration |
|---|---|
| Sharp Point | Useful where the ring must pierce or pass through fabric, upholstery materials, mesh or other suitable materials before closure. |
| Blunt Point | Useful where piercing is not required and reduced risk of accidental puncture or material damage is preferred. |
Point selection should be based on the material being fastened and the requirements of the hog ring tool. Sharp and blunt rings should not automatically be substituted without confirming the application.
The galvanized finish places a zinc coating over the steel wire to provide additional corrosion protection compared with untreated steel.
Galvanized SR15 rings can be used in many general upholstery, fencing, cage and industrial fastening applications. Long-term outdoor, coastal, saltwater or chemical exposure may require a more corrosion-resistant material such as stainless steel or a specified zinc-aluminum coating.
KYA supplies several D-ring sizes for different fastening requirements. The original product range lists SR15 together with SR8 and SR50 reference sizes.
| Model | KYA Listed Size | Closed I.D. | Wire Gauge | Point | Pcs/Carton |
|---|---|---|---|---|---|
| SR15 | 3/4" | 1/4" | 15GA / 1.8mm | Sharp / Blunt | 10,000 |
| SR8 | 9/16" | 1/4" | 16–14GA | Sharp / Blunt | 10,000 |
| SR50 | 1-3/16" | 7/16" | 9GA / 3.66mm | Sharp / Blunt | 2,500 |
SR15 belongs to a widely used 15 gauge D-ring fastener class. Tool compatibility must be confirmed by ring dimensions, collation, jaw geometry and final closure size rather than by gauge alone.
| Tool / System Reference | Compatibility Guidance |
|---|---|
| Stanley SR15 Type | Common 15GA SR15 D-ring system. Confirm actual ring width, open size and closure setting. |
| Encore Hartco RD1001 | Common market reference for the SR15 15GA D-ring class. |
| Everwin DR-SR15 / DR-SR15-LM | Designed for Stanley SR15 / Encore Hartco RD1001-type 1.8mm D rings. |
| KYA Referenced BeA System | Provide exact tool model before ordering because BeA supplies multiple hog-ring sizes and tool families. |
| KYA Referenced Spotnails System | Confirm exact D-ring tool and ring specification rather than selecting by brand alone. |
| KYA Referenced Fasco System | Confirm gauge, D-ring geometry, collation and closure dimensions for the specific tool. |
For replacement purchasing, send the exact pneumatic D-ring tool model or a sample fastener to KYA so compatibility can be confirmed before bulk production.
D rings are widely used in automotive seating to connect upholstery materials, listing wires, springs and compatible seat-frame components.
The ring is compressed around the joined materials by a compatible D-ring tool. Final closure and holding performance depend on tool setup, ring material and the seat components being connected.
SR15 D rings are used for repetitive fastening where a formed ring connection is needed around wire, fabric, mesh, cord or compatible components.
Automotive seat upholstery
Furniture upholstery
Mattress and bedding assembly
Seat springs and spring-to-frame connections
Wire cages
Rabbit, poultry and animal cages
Wire fencing
Silt fence and netting
Bag and sack closure
Bungee cords and rope connections
Lobster and crab traps
Selected landscaping and horticultural fastening
SR15 D rings can be used to connect wire mesh, fencing and cage components where the ring dimensions and final closure provide the required fit around the joined wires.
For exterior fencing, livestock, marine traps or other exposed applications, confirm the expected corrosion environment. Standard galvanized steel provides corrosion protection, but stainless steel or another specified material may be more appropriate for prolonged aggressive exposure.
D rings can provide a mechanical closure around compatible bag necks, fabric, mesh or cord in industrial packaging applications.
Confirm that ring size, point type and closure diameter are appropriate for the bag material. Sharp points may assist penetration where required, while blunt points are preferred when piercing is unnecessary.
| Buyer Check | What to Confirm |
|---|---|
| Model | SR15 or confirmed equivalent fastener class. |
| Wire Diameter | Approx. 1.8mm / 15 gauge. |
| Open Ring Dimensions | Confirm actual width and height against the existing ring or tool specification. |
| Closed I.D. | KYA lists approximately 1/4 inch; verify required finished closure. |
| Point Type | Sharp or blunt according to material and handling requirements. |
| Material | Galvanized steel or alternative material according to corrosion requirements. |
| Tool Model | Confirm magazine, nose geometry, collation and closure setting. |
| Application | Test the closed ring around the actual wire, fabric, spring, mesh or cord. |
KYA lists the SR15 at 10,000 rings per carton for production users, upholstery manufacturers, bedding factories, fencing suppliers, cage manufacturers and fastener distributors.
For bulk purchasing, specify the ring model, point type, material or coating, required quantity and pneumatic tool model so the correct fastener configuration can be confirmed before production.
KYA supplies C-style and D-style hog rings in multiple gauges, sizes, point configurations and materials for upholstery, bedding, fencing, cages, netting, gardening and industrial fastening applications.
Available material options across the hog-ring range include galvanized steel, stainless steel, aluminum and other coated wire options depending on the specific model and application.
SR15 D rings are 15 gauge D-shaped hog rings used with compatible pneumatic ring tools for upholstery, bedding, automotive seating, fencing, wire cages, bag closure and related fastening applications.
The common SR15 size class uses approximately 1.8mm / 0.070-inch wire.
SR15 is commonly sold as a 3/4-inch D-ring size. Dimension terminology varies by manufacturer, so confirm the actual open-ring width, crown measurement and tool specification for replacement orders.
KYA lists an approximately 1/4-inch closed inside diameter for the SR15.
Different manufacturers use different dimension labels. Some Stanley SR15-compatible tool specifications describe approximately 22mm crown width and 19mm / 3/4-inch open-ring size. Match actual dimensions and tool compatibility rather than relying only on the nominal name.
Sharp-point rings are selected when piercing the application material is required. Blunt-point rings are useful when piercing is unnecessary and reduced puncture risk is preferred.
Yes. Automotive seating and upholstery are common applications for 15 gauge D-ring fastening systems.
Yes. Bedding and mattress construction are common D-ring applications where the selected ring and tool are suitable for connecting springs, fabric or compatible components.
Yes. Wire fencing, cages and netting are typical applications when the closed ring provides the required fit around the joined wires.
Galvanizing improves corrosion resistance compared with uncoated steel, but suitability for long-term outdoor, coastal or chemically exposed use depends on the coating specification and service environment. Stainless steel or another corrosion-resistant material may be preferable in more aggressive conditions.
Stanley SR15 / Encore Hartco RD1001-type pneumatic D-ring tools are common references for this fastener class. KYA also references BeA, Spotnails and Fasco systems. Confirm the exact tool model before ordering.
Everwin lists the DR-SR15 and DR-SR15-LM for 15GA Encore Hartco RD1001 / Stanley SR15 D rings. Confirm the actual KYA ring dimensions against the tool specification before production use.
KYA lists 10,000 SR15 rings per carton.
KYA supplies stainless steel and other material options across its D-ring product range. Confirm the required SR15 material and minimum order quantity before ordering.
There is no single strength ratio that applies to all staples and D rings. Joint strength depends on fastener geometry, wire material, gauge, closure, substrate and loading direction, so the complete connection should be tested for the intended application.
Provide the SR15 or equivalent fastener reference, point type, material or finish, required quantity, application and exact pneumatic D-ring tool model.
