A11 Series Staples
KYA
KYA-A11
| Length: | |
|---|---|
| Material: | |
| Color: | |
| Availability: | |
| Quantity: | |
KYA A11 Series staples are 20 gauge fine wire fasteners with a 10.55mm crown and leg lengths from 6mm to 16mm. The series is designed for professional upholstery, furniture trim, carpet pad, insulation, roofing felt, house wrap, screening, crafts and other light fastening applications where this staple profile is specified.
Product code KYA-A11 uses a wire profile of approximately 1.25mm wide × 0.50mm thick. The staples use chisel-point legs and glue collation for feeding through compatible A11-type staplers and tackers.
A11 is commonly described in the fastener industry as a 3/8-inch crown staple family, while KYA specifies the actual crown width as 10.55mm. For replacement fasteners and tool matching, use the complete metric specification rather than relying only on the nominal inch description.
| Product Type | Fine Wire Staple |
| Series | A11 Series |
| Product Code | KYA-A11 |
| Gauge | 20 Gauge |
| Actual Crown Width | 10.55mm |
| Nominal Series Description | 3/8-Inch Crown Class |
| Wire Width | 1.25mm |
| Wire Thickness | 0.50mm |
| Wire Size | 1.25 × 0.50mm |
| Available Leg Lengths | 6–16mm |
| Point Type | Chisel Point |
| Collation | Glue Collated |
| Material Options | Steel / Stainless Steel / Aluminum |
| Galvanized Version | Zinc-Plated / Galvanized Steel |
| Packing | 5,000 pcs / box for listed galvanized versions |
| Typical Applications | Upholstery, trim, carpet pad, insulation, roofing felt, house wrap and light fastening |
The A11 Series combines a 10.55mm crown with a relatively thin 20 gauge wire section. This configuration is commonly used for attaching fabric, vinyl, insulation, roofing felt and other relatively thin materials to suitable substrates.
The A11 Series uses a 1.25 × 0.50mm wire profile. The relatively thin wire makes the series suitable for upholstery, trim, insulation and other light fastening operations where a heavier industrial staple is unnecessary.
KYA specifies an actual crown width of 10.55mm. Although A11 staples are commonly marketed as 3/8-inch crown staples, the exact metric dimension should be used when matching replacement staples to a tool.
The A11 range includes six leg lengths from 6mm through 16mm. This allows buyers to select the required penetration according to the material thickness, substrate and stapler specification.
The staple legs use a chisel-point profile for penetration into suitable substrates when driven by a compatible stapler or hammer tacker.
A11 staples are arranged in glued strips for feeding through compatible stapling equipment. The complete staple dimensions and strip configuration should match the tool magazine.
KYA lists steel, stainless steel and aluminum as material options within the A11 Series. The required material should be selected according to the substrate, operating environment and project specification.
KYA lists six A11 leg lengths. All share the same 10.55mm crown and 1.25 × 0.50mm wire profile in the listed galvanized configuration.
| Item | Leg Length | Crown | Wire Size | Packing |
|---|---|---|---|---|
| A11/06 | 6mm / 1/4" | 10.55mm | 1.25 × 0.50mm | 5,000 pcs / box |
| A11/08 | 8mm / 5/16" | 10.55mm | 1.25 × 0.50mm | 5,000 pcs / box |
| A11/10 | 10mm / 3/8" | 10.55mm | 1.25 × 0.50mm | 5,000 pcs / box |
| A11/12 | 12mm / 1/2" | 10.55mm | 1.25 × 0.50mm | 5,000 pcs / box |
| A11/14 | 14mm / 9/16" | 10.55mm | 1.25 × 0.50mm | 5,000 pcs / box |
| A11/16 | 16mm / 5/8" | 10.55mm | 1.25 × 0.50mm | 5,000 pcs / box |
A11 staples are used for professional light fastening where a 20 gauge fine wire staple with a 10.55mm crown is appropriate for the material and tool.
Furniture upholstery
Furniture trim
Fabric-to-wood fastening
Automotive vinyl and interior trim
Carpet pad fastening
Roofing felt
House wrap
Insulation installation
Screening
Picture frames and molding
Craft and decorative fastening
Other light-duty fastening applications
For roofing felt, house wrap, insulation or other construction-envelope applications, verify the required staple material, length and fastening method specified by the material manufacturer or project requirements.
A11 and 71 Series staples are both used for upholstery and light fastening, but they are different fastener families and should not be treated as interchangeable.
| Specification | A11 Series | 71 Series |
|---|---|---|
| Gauge | 20GA | 22GA |
| KYA Crown | 10.55mm | 9.0mm |
| KYA Wire Size | 1.25 × 0.50mm | 0.75 × 0.55mm |
| Length Range | 6–16mm | 4–16mm |
| Selection | Use only in tools designed for the A11-type fastener format | Use only in tools designed for the 71-type fastener format |
KYA cross-references the A11 Series with PREBENA PF, DUOFAST A11, FASCO A11, SENCO H, SPOTNAILS A11 and RAPID 140 fastener families. Other industry suppliers also list A11-format staples for upholstery staplers, hammer tackers and light fastening tools.
PREBENA PF provides a useful dimensional cross-check because its official specification also lists a 10.55mm crown and 0.50 × 1.25mm wire section. However, individual tools may support different leg lengths, so the exact tool model should be confirmed before ordering.
| KYA Series | A11 Series |
| Gauge | 20 Gauge |
| Actual Crown | 10.55mm |
| Wire Size | 1.25 × 0.50mm |
| Length Range | 6–16mm |
| Common Cross-Reference Families | PREBENA PF / DUOFAST A11 / FASCO A11 / SENCO H / SPOTNAILS A11 / RAPID 140 |
| Before Ordering | Confirm tool manufacturer, exact model and accepted staple length |
Do not select replacement staples only by the descriptions "20 gauge" or "3/8-inch crown." The actual crown width, wire dimensions, staple length and strip format must match the tool specification.
Galvanized A11 staples use zinc-coated steel and are a common choice for upholstery, furniture, crafts and general indoor fastening where galvanized steel meets the application requirements.
KYA lists stainless steel as an available A11 Series material. Stainless steel can be considered for applications that specifically require stainless fasteners or additional corrosion resistance.
Aluminum is also listed within the KYA A11 Series. Buyers should confirm that aluminum is appropriate for the substrate, holding requirement and service environment before selecting this material.
Availability of a specific material should be confirmed for the required A11 leg length when requesting a quotation.
Staple length should be selected according to the thickness of the material being attached, the density and thickness of the base material, and the penetration required for the fastening operation.
Shorter 6mm and 8mm staples can be considered for thinner fastening assemblies, while 10mm to 16mm staples provide progressively greater penetration where the application and tool specification require it.
Always keep the selected leg length within the range accepted by the stapler or hammer tacker. A tool that accepts one A11 size should not automatically be assumed to accept every 6–16mm version.
For accurate product matching and quotation, provide the required A11 leg length, material, purchasing quantity, stapler or tacker manufacturer and model, intended application and delivery destination.
Reference KYA-A11 and specify the exact item, such as A11/06, A11/08, A11/10, A11/12, A11/14 or A11/16.
| Product Code | KYA-A11 |
| Gauge | 20 Gauge |
| Actual Crown | 10.55mm |
| Wire Size | 1.25 × 0.50mm |
| Available Lengths | 6 / 8 / 10 / 12 / 14 / 16mm |
| Point | Chisel Point |
| Collation | Glue Collated |
| Material Options | Steel / Stainless Steel / Aluminum |
| Packing | 5,000 pcs / box for listed galvanized versions |
| Inquiry Information | Required leg length, material, quantity, tool model, application and delivery destination |
KYA A11 Series staples are 20 gauge fine wire staples with a published wire profile of 1.25 × 0.50mm.
KYA specifies the A11 crown at 10.55mm. The series is commonly marketed as a nominal 3/8-inch crown staple family.
No. The 3/8-inch description is a commonly used series designation. For tool compatibility and replacement purchasing, use the actual 10.55mm crown specification.
KYA lists A11 staples in 6mm, 8mm, 10mm, 12mm, 14mm and 16mm leg lengths.
Typical applications include upholstery, furniture trim, carpet pad, automotive vinyl, roofing felt, house wrap, insulation, screening, picture framing and craft fastening.
KYA cross-references the A11 family with PREBENA PF, DUOFAST A11, FASCO A11, SENCO H, SPOTNAILS A11 and RAPID 140 systems. Confirm the exact tool model and supported staple length before ordering.
PREBENA PF uses a 10.55mm crown and a 0.50 × 1.25mm wire section, which closely matches the KYA A11 specification. The exact tool and supported staple length should still be checked before substitution.
Some industry suppliers cross-reference A11-format staples with selected T50-style tools, but compatibility varies by tool model and accepted staple dimensions. Confirm the exact stapler or tacker specification before use.
Yes. KYA lists stainless steel as an available material within the A11 Series. Confirm availability for the required leg length when requesting a quotation.
Yes. Aluminum is also listed as a material option within the KYA A11 Series. Suitability depends on the substrate and fastening requirements.
The listed KYA galvanized A11 versions use 5,000 staples per box. Confirm packaging for the exact material and leg length being ordered.
Select the staple length according to the material thickness, substrate, required penetration and the range accepted by the stapler or hammer tacker.
Provide the required A11 leg length, material, purchasing quantity, stapler or tacker manufacturer and model, intended application and delivery destination. Reference KYA-A11 to identify the fastener family.
FURNITURE ACCESSORIES
OFFICE SUPPLIES
PACKAGING MATERIAL