7/8 In. x 0.120 In. Coil Roofing Nails are 15-degree wire collated roofing nails designed for fast, consistent fastening in asphalt shingles, roofing felt, underlayment, insulation board, and other roofing applications. With a 0.120 in. shank diameter, full round head, sharp point, and stable wire collation, these nails help roofing contractors improve tool feeding efficiency and reduce downtime during high-volume installation.
KYA Fasteners supplies coil roofing nails for wholesale, contractor, distributor, and OEM fastener procurement. Available options include electro-galvanized, hot-dip galvanized, 304 stainless steel, and 316 stainless steel finishes, with smooth shank or ring shank configurations depending on holding power and corrosion-resistance requirements.
Exact roofing size: 7/8 in. length with 0.120 in. shank diameter for short-length roofing fastening applications.
15-degree wire collation: Designed for use with most 15-degree coil roofing nailers.
Full round head: Helps reduce pull-through on shingles, felt, and roofing materials.
Smooth or ring shank: Smooth shank supports easy driving; ring shank provides stronger holding power.
Multiple finish options: Electro-galvanized, hot-dip galvanized, 304 stainless steel, and 316 stainless steel are available for different environments.
Bulk packaging: Commonly supplied in 3.6M or 7.2M nails per box for contractor and distributor orders.
| Product Name | 7/8 In. x 0.120 In. Coil Roofing Nails |
|---|---|
| Nail Length | 7/8 in. / 22.2 mm |
| Shank Diameter | 0.120 in. / 3.05 mm |
| Collation Type | Wire Collated Coil |
| Collation Angle | 15 Degree |
| Head Type | Full Round Head |
| Shank Type | Smooth Shank / Ring Shank |
| Material | Carbon Steel, 304 Stainless Steel, 316 Stainless Steel |
| Finish | Electro-Galvanized, Hot-Dip Galvanized, 304 Stainless Steel, 316 Stainless Steel |
| Typical Packaging | 3.6M or 7.2M nails per box |
| Compatible Tools | Most 15-degree coil roofing nailers; confirm nail length, diameter, and collation angle with the tool manual before use. |
| Main Applications | Asphalt shingles, roofing felt, underlayment, insulation board, roofing accessories, and selected siding details. |
| Finish | Available Lengths | Shank Type | Typical Box Quantity | Recommended Use |
|---|---|---|---|---|
| Electro-Galvanized | 3/4 in., 7/8 in., 1 in., 1-1/4 in., 1-1/2 in., 1-3/4 in. | Smooth / Ring | 7.2M | General roofing work in low to moderate humidity environments. |
| Hot-Dip Galvanized | 1 in., 1-1/4 in., 1-1/2 in., 1-3/4 in. | Smooth / Ring | 7.2M | Outdoor roofing projects requiring stronger zinc coating protection. |
| 304 Stainless Steel | 3/4 in., 7/8 in., 1 in., 1-1/4 in., 1-1/2 in., 1-3/4 in. | Smooth / Ring | 3.6M / 7.2M | Humid or demanding environments where long-term corrosion resistance is required. |
| 316 Stainless Steel | 3/4 in., 7/8 in., 1 in., 1-1/4 in., 1-1/2 in., 1-3/4 in. | Smooth / Ring | 3.6M / 7.2M | Coastal, marine, salt-air, and high-corrosion roofing environments. |
The 7/8 inch length is suitable for short roofing fastening needs where the project requires controlled penetration and fast installation. For structural roofing requirements, local building codes, shingle manufacturer instructions, and substrate thickness should always be checked before selecting nail length.
| Application | Why This Nail Works | Recommended Option |
|---|---|---|
| Asphalt Shingles | Full round head helps hold shingle material, and wire collation supports fast pneumatic installation. | Electro-galvanized or hot-dip galvanized, depending on environment. |
| Roofing Felt and Underlayment | Short nail length and smooth driving help secure lightweight roofing layers efficiently. | Smooth shank, electro-galvanized finish. |
| Insulation Board | Large head and stable collation support consistent fastening during repetitive installation. | Smooth shank or ring shank based on pull-out resistance needs. |
| Siding and Roofing Accessories | 0.120 in. shank diameter provides strong fastening for selected soft materials and trim details. | Ring shank for higher holding power; stainless steel for exposed environments. |
Finish selection is important for roofing nails because moisture, salt air, treated wood, and long-term exposure can affect nail life. For standard roofing projects, electro-galvanized nails are commonly used. For stronger outdoor corrosion resistance, hot-dip galvanized nails are preferred. For coastal or high-corrosion projects, 304 stainless steel or 316 stainless steel nails provide better long-term protection.
| Finish Type | Corrosion Resistance | Best For |
|---|---|---|
| Electro-Galvanized | Basic zinc coating protection. | General asphalt shingle roofing and light-humidity areas. |
| Hot-Dip Galvanized | Thicker zinc coating than electro-galvanized finish. | Outdoor roofing projects requiring stronger rust resistance. |
| 304 Stainless Steel | High corrosion resistance. | Humid, wet, or demanding exterior environments. |
| 316 Stainless Steel | Superior corrosion resistance in salt-air environments. | Coastal roofing, marine projects, and high-corrosion locations. |
Smooth shank coil roofing nails are easier to drive and are widely used in general roofing applications. Ring shank coil roofing nails provide higher withdrawal resistance by gripping the wood fibers more aggressively, making them suitable for projects where stronger holding power is required.
| Shank Type | Advantage | Recommended Use |
|---|---|---|
| Smooth Shank | Fast driving, clean penetration, and efficient feeding. | Standard shingle installation, felt, underlayment, and general roofing use. |
| Ring Shank | Higher holding power and better resistance to nail back-out. | High-hold applications, selected siding work, softer substrates, and demanding roofing conditions. |
KYA Fasteners is a professional fastener manufacturer and supplier with experience in industrial nails, staples, hog rings, and pneumatic fastening solutions. We support bulk orders, custom specifications, finish selection, packaging requirements, and international shipment for roofing nail distributors, building material suppliers, construction companies, and OEM customers.
Factory supply: Stable production for wholesale coil roofing nail orders.
Multiple specifications: 3/4 in. to 1-3/4 in. roofing nail options are available.
Finish customization: EG, HDG, 304 stainless steel, and 316 stainless steel options.
Application support: Help buyers choose suitable nails by roof material, environment, tool compatibility, and packaging quantity.
Export service: Professional packaging and global shipment support for distributors and contractors.
They are used for asphalt shingles, roofing felt, underlayment, insulation board, and selected roofing accessory applications. Buyers should confirm the required nail length with the roof system, substrate thickness, and local building code.
Yes. These are 15-degree wire collated coil roofing nails designed for most 15-degree coil roofing nailers. Always check the nailer manual for accepted nail length, shank diameter, head type, and wire collation angle before use.
Electro-galvanized nails have a thinner zinc coating and are suitable for general roofing use in lower-corrosion environments. Hot-dip galvanized nails have a thicker zinc coating and are preferred for outdoor projects requiring stronger corrosion resistance.
Smooth shank nails are easier to drive and suitable for many standard roofing jobs. Ring shank nails provide higher holding power and better resistance to pull-out, making them useful for demanding roofing or siding applications.
For coastal, salt-air, or high-corrosion environments, stainless steel roofing nails are recommended. 316 stainless steel provides stronger corrosion resistance than 304 stainless steel in marine or salt-exposure conditions.
Common packaging options include 3.6M or 7.2M nails per box. Packaging can be discussed based on order quantity, distributor requirements, and destination market preferences.
Yes. KYA Fasteners can supply bulk coil roofing nails with different lengths, shank types, finishes, and packaging options for distributors, contractors, building material suppliers, and OEM buyers.
