KYA M95 clinching clips are galvanized steel collated fasteners designed for compatible clinching tools used in upholstered furniture, mattress spring, seating and wire-assembly production. The current M95 specification uses an approximately 21.8 mm crown, 6.2 mm inside width, 22.5 mm open height and 1.0 mm material thickness.
A primary application is connecting paper-wrapped wire or support wire to furniture seat springs. M95-style clips can also be used in compatible mattress, sofa, chair, automotive-seat and other formed-wire assemblies where the clip geometry and clinching tool match the joint.
The featured configuration is supplied in a collated strip format with 6,000 clips per carton. Buyers replacing another clinching fastener should compare the complete clip dimensions, collation and tool configuration rather than relying only on the M95 model name.
21.8 mm crown: wide clip profile for compatible furniture, seating and spring-wire connections.
6.2 mm inside width: provides the open space required for suitable wire combinations before clinching.
22.5 mm open height: allows the clip to form around compatible spring and support-wire assemblies.
1.0 mm steel thickness: industrial clip construction for repeated production use.
Galvanized steel: zinc-coated surface for corrosion protection during storage, manufacturing and suitable indoor service.
Collated supply: suitable for compatible production clinching tools and magazines.
6,000 clips per carton: current KYA packing configuration for the featured M95 product.
Multiple applications: furniture springs, paper-wrapped wire, mattress assemblies, car-seat wire frames and compatible wire products.
| Parameter | Specification |
|---|---|
| Model | M95 |
| Fastener Type | Collated Clinching Clip |
| Crown Width | Approximately 21.8 mm |
| Inside Width | Approximately 6.2 mm |
| Open Height | Approximately 22.5 mm |
| Material Thickness | Approximately 1.0 mm |
| Material | Steel |
| Surface | Galvanized |
| Featured Feed Format | Collated Strip |
| Packing | 6,000 pcs / carton |
| Typical Applications | Furniture springs, paper-wrapped wire, mattress spring assemblies, automotive seating and compatible wire connections |
Clinching clips are forming fasteners. The open clip dimensions determine how the fastener fits around the components before the tool bends and closes it around the joint.
| Dimension | M95 | Selection Consideration |
|---|---|---|
| Crown Width | 21.8 mm | Must match the magazine, clip guide, blade and anvil width. |
| Inside Width | 6.2 mm | Determines the available opening around the wire or spring components. |
| Open Height | 22.5 mm | Provides the material length required to form the finished clinched connection. |
| Thickness | 1.0 mm | Must be suitable for the tool blade, anvil and required forming force. |
The featured M95 clip is manufactured from galvanized steel. The zinc-coated surface provides corrosion protection compared with untreated steel during storage, production and normal indoor use.
Galvanized steel should not be considered completely corrosion-proof. Actual performance depends on coating condition, humidity, chemicals and the final operating environment.
One of the primary uses of M95 clinching clips is attaching paper-wrapped wire or support wire to sofa, chair and other upholstered-furniture seat springs.
The support wire can connect several springs so they operate as part of one seating platform. The clip is positioned around the selected wire and spring connection and then mechanically closed with a compatible clinching tool.
M95 clips can be used in compatible sofa seats, chairs and upholstered furniture where spring wire and support wire need a mechanically formed connection.
Furniture constructions vary by manufacturer. Confirm the spring diameter, support-wire diameter and tool setup before selecting the M95 clip for a new assembly.
M95-style clinching clips can also be used in compatible mattress and spring-unit assemblies where wire components need to be joined mechanically.
Possible connections can include spring wire, stay wire, support wire or frame wire. The correct fastener depends on the actual wire diameters and the required closed clip geometry.
Clinching clips are used in compatible automotive-seat and formed-wire assemblies where spring, frame or support wires require mechanical joining.
Automotive applications normally follow component-specific drawings, approved materials and defined tooling. Verify the M95 dimensions and finished joint with the required assembly specification before production use.
Clinching clips are also used in selected wire-cage, mesh and formed-wire products where adjacent wire components need to be retained together.
The M95 clip should only be selected where its 6.2 mm opening, 22.5 mm height and finished clinch geometry are appropriate for the wire combination and tool.
The M95 configuration documented on this page is a collated strip clip. The strip is loaded into the magazine of a compatible clinching tool and advanced to the blade as each fastener is applied.
Strip feeding supports repetitive production while keeping the clips aligned for the clinching head. Magazine geometry and collation dimensions must match the selected fastener.
Roll-fed clinching clips are also used in mattress and furniture manufacturing, but roll and strip formats use different feeding systems. A roll-fed product should not be assumed to have the same dimensions, collation or machine requirements as the strip-fed M95 described on this page.
If your production equipment requires a continuous roll, provide the machine model and current roll-clip reference so the appropriate roll configuration can be identified.
A pneumatic clincher is not compatible with M95 simply because it is designed for furniture or mattress clips. The tool must accept the full M95 geometry and strip configuration.
| Compatibility Item | M95 Requirement to Check |
|---|---|
| Crown / Clip Width | Approximately 21.8 mm |
| Inside Opening | Approximately 6.2 mm |
| Open Height | Approximately 22.5 mm |
| Material Thickness | Approximately 1.0 mm |
| Magazine | Must accept the M95 strip width, pitch and collation format. |
| Driver Blade | Must engage the clip correctly without deforming the strip or fastener before clinching. |
| Anvil / Jaw | Must close the clip to the required finished geometry for the wire combination. |
Some clinching tools from different manufacturers may use fasteners in similar dimensional classes, but brand name alone is not sufficient to confirm compatibility.
When replacing clips used in a KYA, Hartco-style, Bostitch, Atro or another clinching system, provide the exact tool model and current fastener reference. The magazine, blade and anvil configuration should be checked before production use.
The open clip is positioned around the wire or spring components to be joined. The clinching tool then drives the clip against an anvil or closing jaw, causing the ends of the clip to bend around the connection.
The completed joint should show consistent clip positioning and closure without excessive deformation of the joined wires. Tool setup and final joint inspection are important when changing clip suppliers or wire dimensions.
| Application Factor | What to Check |
|---|---|
| Spring Wire | Measure the diameter of the spring or formed wire. |
| Support Wire | Measure paper-wrapped wire, stay wire or frame-wire diameter. |
| Combined Joint Size | Confirm the two components fit within the open clip before forming. |
| Finished Closure | Confirm the clip closes around the connection without excessive wire deformation. |
| Production Tool | Check magazine, blade, anvil and operating setup. |
KYA also lists an M96 clip family with dimensions that are close to M95. Similar nominal dimensions do not mean the two fasteners should automatically be interchanged.
| Parameter | M95 | M96 Reference |
|---|---|---|
| Crown | 21.8 mm | 21.8 mm |
| Inside Width | 6.2 mm | 6.2 mm |
| Height | 22.5 mm | Approximately 22.2 mm |
| Thickness | 1.0 mm | Approximately 1.0 mm |
Where two clip families are dimensionally close, use the exact tool specification, current fastener reference and finished closure requirement to determine the correct product.
The current KYA M95 product specification lists 6,000 clips per carton. For distributor orders or production programs, confirm current carton configuration and labeling requirements with the quotation.
| Order Information | What to Provide |
|---|---|
| Current Fastener | Provide M95 or the current clip model, drawing or physical sample. |
| Tool Brand and Model | Provide the exact pneumatic or production clincher model. |
| Feed Format | Confirm strip-fed or specify if a separate roll-fed solution is required. |
| Crown | Approximately 21.8 mm. |
| Inside Width | Approximately 6.2 mm. |
| Height | Approximately 22.5 mm. |
| Thickness | Approximately 1.0 mm. |
| Wire Dimensions | Provide the diameters of the components being joined. |
| Application | Specify furniture spring, mattress assembly, automotive seat, cage or other wire product. |
| Quantity | Provide required carton quantity or estimated production consumption. |
M95 clips are used for compatible wire and spring connections in upholstered furniture, mattress spring assemblies, seating systems and other formed-wire products.
The current KYA specification is approximately 21.8 mm crown, 6.2 mm inside width, 22.5 mm open height and 1.0 mm thick.
The featured configuration is manufactured from galvanized steel.
The current KYA specification lists 6,000 clips per carton.
Yes. Connecting support wire or paper-wrapped wire to compatible sofa and chair seat springs is a primary application for this clip type.
Yes. The clip can be positioned over compatible paper-wrapped wire and spring components and then closed with an appropriate clip tool.
Yes, in compatible mattress and spring-unit wire connections where the clip dimensions and tool configuration match the assembly.
Not necessarily. M95 is better treated as a general furniture, seating and spring-assembly clinching clip. Suitability for a specific pocket-spring production process depends on the machine and joint design.
They can be used in compatible automotive-seat wire assemblies where the clip geometry matches the approved joint and tooling.
They can be used in selected cage and formed-wire applications where the 6.2 mm opening and finished clinch are suitable for the wire combination.
No. The tool must match the clip width, opening, height, thickness, strip collation, magazine, blade and anvil configuration.
Do not assume compatibility from the brand name alone. Provide the exact Bostitch tool model and current fastener specification so the M95 geometry and magazine requirements can be compared.
Compatibility depends on the exact Atro model, clip profile and internal tool configuration. Verify the complete fastener specification before changing suppliers.
Yes. The documented M95 configuration on this page is a collated strip clip for compatible clinching tools.
Roll-fed clinching clips are used in the mattress and furniture industry, but their dimensions and feeding systems can differ from strip-fed M95 clips. Provide the machine and current roll reference to confirm the required roll product.
Strip clips are collated in shorter magazines for compatible strip-fed tools. Roll clips use continuous collation for machines designed around a roll-feed system. They are not automatically interchangeable.
No automatic interchangeability should be assumed. Their published dimensions are close, so use the exact tool specification, current clip reference and finished-joint requirement to select the correct model.
No. Galvanizing provides corrosion protection, but service life depends on moisture, chemicals, coating condition and the operating environment.
Joint performance depends on the clip, wire dimensions, material, tool adjustment and finished closure. Inspect and test the actual assembly rather than relying on an absolute performance claim.
Yes. Check strip feeding, clip positioning, blade and anvil operation, finished closure and joint retention on the actual production assembly before volume use.
Provide the required quantity, tool brand and model, existing clip reference, wire or spring dimensions, application, feed format and destination market.
KYA supplies M95 galvanized clinching clips with a 21.8 mm crown, 6.2 mm inside width, 22.5 mm open height and 1.0 mm thickness for furniture manufacturers, mattress factories, seating manufacturers, wire-product factories and industrial fastener distributors. Send your current clip reference, clinching-tool model, wire dimensions, application and quantity to confirm the appropriate configuration.
