KYA No.10 Office Staples are zinc-plated steel staples designed for everyday document binding with compatible No.10 desktop and mini staplers. The staples feature a 9.40mm crown, 4.65mm leg length and 0.50 × 0.35mm wire dimensions.
A chisel-point design supports clean penetration through paper, while the zinc-plated surface protects the steel wire during normal office storage and use. The listed binding capacity is up to 20 sheets of 70gsm paper when used with a suitable stapler.
KYA references Rexel, Rapid, Leitz, Novus and Esselte among compatible stapler brands. Because No.10 staples can vary in leg length and specifications between manufacturers, confirm that the specific stapler accepts a 9.40mm crown and 4.65mm leg before bulk ordering.
| Specification | Details |
| Product | No.10 Office Staples |
| Crown Width | 9.40mm |
| Leg Length | 4.65mm |
| Wire Width | 0.50mm |
| Wire Thickness | 0.35mm |
| Wire Size | 0.50 × 0.35mm |
| Point Type | Chisel Point |
| Surface Finish | Zinc Plated |
| Listed Binding Capacity | Up to 20 sheets of 70gsm paper |
| Referenced Stapler Brands | Rexel, Rapid, Leitz, Novus, Esselte and compatible No.10 staplers |
Stapling capacity depends on the stapler mechanism, paper weight, paper type and staple specification. The 20-sheet figure refers to KYA's listed capacity with 70gsm paper and should not be treated as the capacity of every No.10 stapler.
The featured No.10 staple has a 9.40mm crown and 4.65mm leg length. These dimensions should be checked against the staple specification printed on the stapler or listed in the stapler manufacturer's instructions.
No.10 is used by multiple office-stapler manufacturers, but individual products may use different leg lengths or paper capacities. For replacement purchasing, matching the physical staple dimensions is more reliable than selecting by the No.10 name alone.
The staple wire measures 0.50mm wide and 0.35mm thick. Consistent wire dimensions are important for feeding through the stapler magazine, forming the staple correctly and clinching the legs after penetration through the paper stack.
When sourcing replacement staples for a particular stapler model, confirm the crown width, leg length and wire dimensions together rather than relying only on the staple series name.
The No.10 staples use chisel-point legs. The shaped tips concentrate force at the end of each leg as the stapler drives the staple through paper, supporting clean penetration in normal document-binding applications.
Reliable feeding also depends on staple-strip consistency, the condition of the stapler magazine and using the correct staple dimensions for the tool.
The staple wire has a zinc-plated surface. Zinc plating provides corrosion protection for the underlying steel during normal storage and office use while maintaining the metallic finish expected for standard office staples.
Store office staples in a dry environment and protect opened boxes from excessive moisture to help maintain consistent surface condition and feeding performance.
KYA lists the No.10 staple for binding approximately 2–20 sheets of 70gsm paper. Actual capacity depends on the stapler, paper thickness, paper density and operating condition.
If the stapler manufacturer specifies a lower maximum sheet capacity, follow the stapler manufacturer's limit even when the staple itself is listed for a larger paper stack.
KYA references Rexel, Rapid, Leitz, Novus and Esselte among the office-stapler brands that offer No.10-compatible models.
Compatibility is determined by the individual stapler model rather than the brand name alone. Before bulk purchasing, confirm that the stapler is designed for staples matching the KYA dimensions of 9.40mm crown and 4.65mm leg length.
| Referenced Brand | Compatibility Check |
|---|---|
| Rexel | Confirm the specific stapler accepts the required No.10 staple dimensions. |
| Rapid | Check the exact model and required leg length before ordering. |
| Leitz | Confirm staple series, crown and leg dimensions for the specific stapler. |
| Novus | Confirm the model and required No.10 specification because leg lengths can vary. |
| Esselte | Check the stapler's specified staple dimensions before purchase. |
KYA supplies several office staple sizes for different desktop and heavy-duty staplers. Match the staple dimensions and paper capacity to the specific stapler before ordering.
| Size | Crown (mm) | Leg Length (mm) | Wire (mm) | Sheets (70gsm) | Finish |
|---|---|---|---|---|---|
| No.10 | 9.40 | 4.65 | 0.50 × 0.35 | 2–20 | Zinc Plated |
| No.24/6 | 12.80 | 6.00 | 0.70 × 0.50 | 2–25 | Zinc Plated |
| No.26/6 | 12.70 | 6.00 | 0.55 × 0.40 | 2–20 | Zinc Plated |
| No.23/6 | 13.00 | 6.00 | 0.70 × 0.50 | 10–30 | Zinc Plated |
| No.23/8 | 13.00 | 8.00 | 0.70 × 0.50 | 10–50 | Zinc Plated |
No.10 Office Staples are designed for lightweight everyday paper fastening with compatible mini and desktop staplers.
Binding office documents and reports
Fastening invoices and forms
Notebooks and note sets
Diaries and calendars
School paperwork
Reception and administrative work
Home-office document organization
Retail stationery and office-supply distribution
When replacing office staples, first check the staple specification marked on the stapler or listed in its instruction manual. Do not rely only on the stapler brand because a manufacturer may produce multiple models requiring different staple sizes.
| Buyer Check | KYA No.10 Reference |
|---|---|
| Staple Series | No.10 |
| Crown Width | 9.40mm |
| Leg Length | 4.65mm |
| Wire Size | 0.50 × 0.35mm |
| Paper Capacity | Listed at up to 20 sheets of 70gsm paper; also check the stapler's rated capacity. |
| Point | Chisel Point |
| Finish | Zinc Plated |
Free samples are available upon request for product evaluation. When requesting samples, provide the required staple size and stapler model when available so compatibility can be checked.
OEM branding and custom packaging are available for distributors, office-supply companies, stationery retailers and other bulk buyers. Contact KYA with the required package quantity, label design and purchasing volume for confirmation.
KYA Fasteners has more than 20 years of experience supplying fasteners and office staples. The company states that its office staples are supplied to customers in more than 50 countries.
KYA states that worldwide shipments leave from Qingdao port within 20–30 days. OEM branding and customized packaging can be discussed for wholesale, distribution and retail supply requirements.
KYA No.10 staples have a 9.40mm crown, 4.65mm leg length and 0.50 × 0.35mm wire size.
KYA lists a capacity of up to 20 sheets of 70gsm paper. Actual capacity also depends on the stapler and paper thickness.
No. No.10 products from different manufacturers can use different leg lengths and specifications. Check the dimensions required by the individual stapler before ordering.
Rapid is among the brands referenced by KYA, but compatibility depends on the specific Rapid stapler model. Confirm that the model accepts the required No.10 dimensions before purchasing.
These brands are also referenced by KYA. Check the individual stapler specification because staple dimensions and leg lengths can vary between models.
The staples use a chisel point designed for clean penetration through paper.
The wire measures 0.50mm wide and 0.35mm thick.
The staples have a zinc-plated finish.
They can be used with mini or desktop staplers specifically designed for compatible No.10 staples. Check the stapler specification before use.
Yes. Typical applications include reports, invoices, forms, notes, notebooks, calendars and other lightweight document-binding work.
The listed range includes No.10, 24/6, 26/6, 23/6 and 23/8 office staples, with different crown widths, leg lengths and paper capacities.
Yes. KYA states that free samples are available upon request.
Yes. OEM branding and customized packaging are available for bulk purchasing requirements.
KYA states that it supplies customers in more than 50 countries.
KYA states that worldwide shipments leave from Qingdao port within 20–30 days.
