25MM
KYA
KYA-25
| Availability: | |
|---|---|
| Quantity: | |
KYA 25mm Polyester Composite Strap is a heavy-duty composite strapping product manufactured from polyester fibers with a protective polypropylene coating. The featured Composite 85 CC/2 configuration is 25mm (1 inch) wide, has a published strength specification of 785/1260 daN, and is supplied in 500m coils.
The strap is intended for industrial bundling, palletizing and cargo-securing applications involving steel products, machinery, timber, pallets, aluminum products and other compatible loads. The complete strapping system should be selected together with a matching wire buckle and suitable tensioning equipment.
The following specifications are published for the KYA 25mm Composite 85 CC/2 product.
| Parameter | Specification |
|---|---|
| Product Type | Polyester Composite Strap |
| Model | 25MM |
| Product Code | Composite 85 CC/2 |
| Width | 25mm (1") |
| Material | Polyester fibers with polypropylene coating |
| Published Strength | 785/1260 daN |
| Coil Length | 500m / coil |
| Joining Method | Compatible wire buckle |
The KYA product table publishes the strength as 785/1260 daN. Where a purchasing specification requires separate linear strap strength and tested system strength, confirm the applicable test method, buckle and complete system configuration before ordering.
KYA publishes composite strapping from 13mm through 32mm. The table below preserves the current product-family dimensions, strength values and coil lengths.
| Size | Product Name | Published Strength | Coil Length |
|---|---|---|---|
| 13mm (1/2") | Composite 40 CC/2 | 200/320 daN | 1100m |
| 13mm (1/2") | Composite 40 CC | 300/480 daN | 1100m |
| 16mm (5/8") | Composite 50 CC/2 | 285/460 daN | 850m |
| 16mm (5/8") | Composite 50 CC | 425/680 daN | 850m |
| 19mm (3/4") | Composite 60 CC/2 | 380/610 daN | 750m |
| 19mm (3/4") | Composite 65 CC/2 | 475/760 daN | 750m |
| 25mm (1") | Composite 85 CC/2 | 785/1260 daN | 500m |
| 32mm (1-1/4") | Composite 105 CC/2 | 1000/2000 daN | 350m |
The 25mm composite strap is manufactured from polyester fibers held together and protected by a polypropylene coating. This construction combines the tensile properties of polyester fibers with a coated surface that improves handling during strapping operations.
The polypropylene coating also provides additional moisture protection and helps the strap pass beneath pallets and through compatible wire buckles. Actual performance depends on the storage environment, chemicals, temperature, sunlight and complete securing configuration.
25mm Width: Provides a broad contact area for suitable medium-to-heavy industrial loads.
Published 785/1260 daN Strength: Designed for applications requiring a higher strength class than smaller 13mm, 16mm and 19mm products in the same range.
Flexible Construction: Polyester composite strap can conform around compatible irregular and bundled products.
Low Strap Weight: Composite strap is relatively easy to transport and handle compared with many metal strapping systems.
Non-Metallic Strap: The polyester/polypropylene strap itself does not form metallic rust.
Wire-Buckle Joint: Compatible wire buckles allow the strap to be joined and tensioned without conventional metal seals.
Re-Tensioning Capability: Wire-buckle composite systems can allow re-tensioning where the selected buckle, tool and load configuration permit it.
Printable Surface: The current KYA product information lists company-name and logo printing as available.
Polyester composite strapping can be used as an alternative to steel strapping in suitable industrial bundling and cargo-securing applications. It should not, however, be considered a direct replacement for every steel strapping system.
Composite strap is flexible and does not have the cut metallic edges associated with steel banding. It can also accommodate some load movement in suitable applications. Steel strapping may remain appropriate where high temperatures, sharp edges, specific transport standards or other operating conditions require a metal system.
Selection should therefore be based on the required complete system performance, cargo characteristics and transport conditions rather than strap width alone.
The 25mm Composite 85 CC/2 strap is intended for industrial load containment and bundling where its published dimensions and strength class are appropriate.
Steel tube and metal profile bundles
Aluminum ingots and profiles
Timber and lumber packs
Machinery and motors
Heavy palletized goods
Crates and export packaging
Mining and industrial equipment
Oil and gas equipment packaging
Freight-forwarding and logistics packaging
Cargo securing where the selected strap-and-buckle system satisfies the required securing load
For container, flat-rack or other transport-securement applications, determine the required securing forces and confirm that the complete strap, buckle and tensioning system is suitable for the load.
The 25mm strap should be used with a compatible wire buckle sized for the selected composite strapping. Buckle dimensions, wire diameter and surface treatment can affect the strength of the completed joint.
For applications requiring a specified system strength, confirm the tested strap-and-buckle combination instead of choosing a buckle only by nominal 25mm width.
When replacing an existing system, provide the current strap model, buckle dimensions, buckle wire diameter and required strength so that the matching configuration can be checked.
Select a tensioning tool that is specifically suitable for composite strapping and accepts the required 25mm strap width. Tool selection should also take into account strap thickness, required applied tension and the load being secured.
Apply tension according to the strap, buckle and tool specifications. Excessive tension can damage the strap, buckle, packaged product or load edges.
The current KYA product information states that its polyester composite strapping has been tested and certified by Germanischer Lloyd.
Where certification is required by a purchasing specification, transport operator or cargo-securing project, request the current supporting documentation and verify that it covers the exact 25mm strap, buckle combination and intended application being purchased.
The current KYA product information states that sample orders are available for product evaluation. Contact KYA with the required 25mm configuration and testing requirement to confirm current sample availability.
The current product information lists approximately 3–5 days for samples and approximately 30 days for mass production, depending on order quantity. Confirm the actual production schedule for each order before purchase.
The current product information lists standard payment terms of T/T with 30% deposit before manufacture and 70% balance before delivery, while other arrangements may be discussed. Confirm the commercial terms on the final quotation.
Logo and company-name printing is listed as available. Provide the artwork, print content, strap specification, quantity and packaging requirements before production so feasibility can be confirmed.
KYA publishes a 785/1260 daN strength specification for Composite 85 CC/2. Confirm which strength criterion is required by the project and request the applicable supporting test data where necessary.
Choose a buckle designed for 25mm composite strapping and the required strength class. The buckle is part of the securing system and can affect overall joint performance.
Sharp, abrasive or unfinished cargo edges can damage composite strapping. Use suitable edge protection where required.
Confirm that the selected tool accepts 25mm composite strap and can apply the required tension without exceeding the limits of the strap, buckle or cargo.
If the project requires a particular certification, breaking-strength report or securing-system test, specify this requirement before ordering so the applicable documents can be checked.
25mm Composite 85 CC/2 requirement
Required strength or system performance
Required number of coils
Cargo type, weight and dimensions
Bundling, palletizing or transport-securement application
Required wire buckle specification
Existing tensioning equipment, if applicable
Custom logo or printing requirements
Required certification or test documentation
Delivery destination
Send Your 25mm Strap Requirements
The featured product is Composite 85 CC/2, with a width of 25mm (1"), a published strength specification of 785/1260 daN and 500m per coil.
KYA describes the product as polyester fibers with a protective polypropylene coating.
KYA currently publishes the strength as 785/1260 daN. Where the distinction between strap breaking strength and complete system strength is important, request the applicable test information and buckle specification.
The published coil length for the 25mm Composite 85 CC/2 is 500 meters.
It can replace steel strapping in suitable load-securing and bundling applications, but not universally. Compare the required system strength, cargo edges, temperature, transport conditions and applicable securing requirements before changing materials.
The polyester/polypropylene strap itself does not form metallic rust. Wire buckles and other metal components should still be selected for the expected environmental conditions.
The polypropylene coating provides additional moisture protection, but outdoor suitability depends on sunlight, temperature, chemicals, exposure duration and the complete strapping system.
Use a compatible wire buckle designed for 25mm composite strapping and the required strength class. Confirm buckle dimensions and wire diameter where tested system strength is important.
Wire-buckle composite strapping systems can allow re-tensioning where the selected buckle, tensioning tool and load configuration permit it.
Yes. The current KYA product information states that samples are available for evaluation. Contact KYA with your required configuration and testing requirements to confirm sample availability.
The current product information lists approximately 3–5 days for samples and approximately 30 days for mass production, depending on order quantity. Confirm the actual schedule before ordering.
Yes. The current product information lists company-name and logo printing as available. Provide artwork and order details for production confirmation.
The current product information lists T/T with a 30% deposit before manufacture and 70% balance before delivery, with other terms subject to discussion and final quotation.
KYA's current product information references Germanischer Lloyd testing and certification for its composite strapping. Where certification is required, request the current document and verify that it applies to the exact strap and securing configuration being ordered.
View the KYA strap and buckle catalog for additional composite strapping sizes, wire buckles and related load-securing products.
KYA supplies polyester composite strapping, matching wire buckles and related packaging products for distributors, manufacturers, logistics companies and industrial buyers. Send your required quantity, buckle specification, cargo application, documentation requirements and delivery destination for product confirmation and quotation.
FURNITURE ACCESSORIES
OFFICE SUPPLIES
PACKAGING MATERIAL