15GA 15SS100 3/4 Inch Stainless Steel Hog Rings
Product Description
15GA 15SS100 3/4 Inch Stainless Steel Hog Rings ● 15 Gauge 3/4'' crown c ring staples. ● Made of Stainless Steel. ● Staples Compatible with C7E, C7CA ● High tensile strength. ● No corrosion happens. ● Sharp point nails deliver efficient and dependable performance. ● Ideal for mattress, car seat, sofa, fencing, pet cage, traps, sausage casings and dozen more uses around farm and home. |
| Item: | 15GA 15SS100 3/4 Inch Stainless Steel Hog Rings |
| Gauge: | 15 Gauge |
| Fastener Type: | Hog rings |
| Material: | SS304 |
| Surface Finishing: | Stainless Steel |
| Point: | Sharp |
| Outside Diameter: | 3/4 inch |
| Thickness: | 1.80mm |
| Height | 12.0mm |
| Packing: | 10000 pcs/ctn |
| Fitting Tools: | C7E, C7CA |
Hog Ring Gun:
| HOG RING GUN C-7CA52 |
| HOG RING GUN C-7EA |
Other Rings in this Series:
Other Rings in this Series:
| Description | Part # | Strip Size | Box Count | Box Weight | Box Per Skid | Skid Weight | ||||||||||||||||||||||||||
| Bright Basic Sharp Point | 15100 | 100 rings | 10,000 rings | 17 lbs. | 100 boxes | 1,700 lbs. | ||||||||||||||||||||||||||
| Bright Basic Blunt Point | 15100B | 100 rings | 10,000 rings | 17 lbs. | 100 boxes | 1,700 lbs. | ||||||||||||||||||||||||||
| Galvanized Sharp Point | 15G100 | 100 rings | 10,000 rings | 17 lbs. | 100 boxes | 1,700 lbs. | ||||||||||||||||||||||||||
| Galvanized Blunt Point | 15G100B | 100 rings | 10,000 rings | 17 lbs. | 100 boxes | 1,700 lbs. | ||||||||||||||||||||||||||
| Stainless Steel Sharp Point | 15SS100 | 100 rings | 10,000 rings | 17 lbs. | 100 boxes | 1,700 lbs. | ||||||||||||||||||||||||||
| Stainles Steel Blunt Point | 15SS100B | 100 rings | 10,000 rings | 17 lbs. | 100 boxes | 1,700 lbs. | ||||||||||||||||||||||||||
Wire fencing: chain link fence, welded wire mesh, chicken wire mesh, plastic mesh;
Wire cage: lobster & crab pots, rabbit cage, dog kennel, other animal cages;
Upholstery: automobile and domestic;
Gardening: bird netting, trellises;
Note: special specifications are customized on request.
Bright Finish
Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.
Hot Dip Galvanized (HDG)
Hot dip galvanized fasteners are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow. Areas near the coasts where the salt content in rain water is much higher, should consider Stainless Steel fasteners as salt accelerates the deterioration of the galvanization and will accelerate corrosion.
Electro Galvanized (EG)
Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener.
Stainless Steel (SS)
Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel.