The SC-7C manual hog ring plier is designed for professional fastening of wire mesh, fencing, netting, agricultural wire and compatible gabion mesh. It uses collated hog rings with a 23.7 mm crown, 1.8 mm ring wire and an approximately 7.0 mm closed diameter.
With a net weight of approximately 1.2 kg and an auto-feed magazine holding up to 125 rings, the SC-7C provides a portable fastening solution for installers, fencing contractors, farms, wire-product manufacturers and distributors. Because it is manually operated, no compressor, air hose or electrical power is required.
The SC-7C combines manual closing force with a long auto-feed magazine. Collated hog rings are loaded into the magazine and advanced toward the forming jaws during repetitive fastening, reducing the need to position individual loose rings by hand.
Manual operation: No compressor or electrical supply is required.
125-ring magazine: Supports longer fastening cycles between reloads.
23.7 mm crown: Designed around a specific compatible hog ring size.
1.8 mm ring wire: Matches the specified fastener thickness for this tool.
7.0 mm closure: Forms compatible rings to approximately the specified closed diameter.
Rubber-wrapped handle: Provides a comfortable gripping surface during repeated manual use.
Portable design: Suitable for field installation and locations without compressed air.
Check the tool and fastener dimensions before ordering to confirm that the SC-7C matches your wire, mesh, netting and required ring closure.
| Parameter | Specification |
|---|---|
| Model | SC-7C |
| Product Code | KYA-SC-7C |
| Tool Type | Manual Hog Ring Plier / Manual C-Ring Plier |
| Tool Dimensions | 340 × 90 × 80 mm |
| Net Weight | 1.2 kg / 2.64 lbs |
| Feed Type | Auto-Feed Magazine |
| Load Capacity | 125 Rings |
| Compatible Ring Crown | 23.7 mm |
| Ring Wire Thickness | 1.8 mm |
| Closed Ring Diameter | Approx. 7.0 mm |
| Power Requirement | Manual – No Compressor Required |
| Main Applications | Wire Fencing, Netting, Agricultural Wire, Compatible Mesh and Gabion Applications |
The SC-7C must be used with correctly sized collated hog rings. Ring dimensions directly affect magazine feeding, jaw alignment and the final closed shape.
| Fastener Item | SC-7C Requirement |
|---|---|
| Fastener Type | Collated Hog Ring / C-Ring |
| Open Crown | 23.7 mm |
| Ring Wire Thickness | 1.8 mm |
| Approximate Closed Diameter | 7.0 mm |
| Loading Format | Collated Strip |
If you are replacing rings from another supplier, confirm the open crown, wire thickness and closed diameter instead of selecting the fastener only by appearance. A similar-looking ring with different dimensions may not feed or form correctly.
| Feature | User Benefit |
|---|---|
| Manual Operation | No compressor, hose or electrical power is required. |
| 125-Ring Capacity | Reduces reload frequency during repetitive fastening. |
| Auto-Feed Magazine | Advances compatible rings toward the forming jaws during operation. |
| Rubber-Wrapped Handle | Provides a comfortable gripping surface during repeated manual closing. |
| 1.2 kg Tool Weight | Supports mobile installation, field maintenance and workshop use. |
| Dedicated Forming Jaws | Forms compatible C-rings around wire, mesh and netting components. |
Manual and pneumatic hog ring tools are suited to different production conditions. The SC-7C provides portability and simple setup, while pneumatic tools are generally more appropriate for continuous high-frequency fastening at a fixed workstation.
| Comparison | SC-7C Manual Plier | Pneumatic Hog Ring Tool |
|---|---|---|
| Power Source | Manual | Compressed Air |
| Compressor Required | No | Yes |
| Portability | Suitable for Mobile and Field Work | Normally Used Near an Air Supply |
| Typical Work | Installation, Repair and Moderate Repetitive Fastening | High-Frequency Production Fastening |
The SC-7C is suitable where its 23.7 mm crown ring and approximately 7.0 mm finished closure match the combined dimensions of the materials being secured.
| Application | Typical Fastening Work |
|---|---|
| Wire Fencing | Connecting compatible fence mesh, support wire and tension wire. |
| Agricultural Netting | Fastening compatible farm, vineyard and garden netting to support wire. |
| Bird and Poultry Netting | Securing compatible netting and light wire support systems. |
| Wire Mesh | Joining compatible mesh intersections and mesh-to-wire connections. |
| Compatible Gabion Work | Fastening compatible lighter mesh where the specified ring size and closure meet the project requirements. |
Confirm that the hog rings match the required 23.7 mm crown and 1.8 mm wire specification.
Load the compatible collated ring strip into the magazine.
Check that the rings move freely toward the forming jaws.
Place the open ring around the wire, mesh or netting connection.
Squeeze the handles fully to form the ring around the materials.
Release the handles and allow the next ring to advance.
Inspect the finished closure before continuing repetitive fastening.
A hog ring tool should be selected according to the fastener dimensions and the combined thickness of the materials being joined. Similar-looking tools can use significantly different ring sizes.
| Check Before Ordering | What to Confirm |
|---|---|
| Ring Crown | 23.7 mm for SC-7C. |
| Ring Wire Thickness | 1.8 mm for SC-7C. |
| Required Closed Diameter | Approximately 7.0 mm. |
| Collation | Confirm compatibility with the SC-7C auto-feed magazine. |
| Material Thickness | Check the combined wire, mesh or netting dimensions at the fastening point. |
| Required Work Rate | Choose manual operation for portable and moderate-volume work or a pneumatic tool for higher continuous output. |
Use compatible collated rings with the correct crown, wire thickness and closure dimensions.
Do not load bent, damaged or deformed rings into the magazine.
Keep the magazine channel clean so rings can advance smoothly.
Inspect the forming jaws regularly for visible wear or damage.
Keep handles and rubber grips clean and dry during operation.
Do not apply excessive force if a ring is incorrectly positioned or jammed.
Remove the ring strip before servicing the jaws or magazine.
| Issue | Possible Cause | Recommended Check |
|---|---|---|
| Ring does not close correctly | Incorrect ring dimensions | Confirm 23.7 mm crown, 1.8 mm wire and required 7.0 mm closure. |
| Uneven ring closure | Worn or damaged forming jaws | Inspect the jaw surfaces and forming profile. |
| Magazine does not feed | Bent rings or contamination | Remove damaged rings and clean the magazine channel. |
| Ring jams near the jaws | Incorrect loading or damaged collation | Unload the tool, clear the ring carefully and reload a compatible strip. |
| High operating force | Incorrect rings, excessive material thickness or tool wear | Confirm the application and inspect the moving and forming components. |
KYA Fasteners supplies SC-7C manual hog ring pliers and compatible hog rings for fencing contractors, netting installers, agricultural suppliers, wire-product manufacturers, distributors and professional users.
For quotation and compatibility confirmation, provide your required quantity, destination country, application and ring dimensions. For replacement projects, photos or measurements of the existing rings can help confirm the correct fastening system.
The SC-7C is a manual hog ring plier. It does not require an air compressor, air hose or electrical power.
The SC-7C is designed for compatible collated rings with a 23.7 mm crown and 1.8 mm wire thickness.
The specified closed-ring diameter is approximately 7.0 mm.
The auto-feed magazine has a listed capacity of 125 rings.
The listed net weight is approximately 1.2 kg / 2.64 lbs.
The detailed product specification lists the tool dimensions as approximately 340 × 90 × 80 mm.
Yes. Compatible collated rings are loaded into the magazine and advanced toward the forming jaws during repeated use.
Yes. Wire fencing, tension wire, netting and compatible mesh fastening are key applications of the SC-7C. Confirm that the ring closure matches the material dimensions before bulk use.
The SC-7C can be used where its 23.7 mm crown, 1.8 mm ring wire and approximately 7.0 mm closed diameter are compatible with the gabion mesh and connection requirements. For heavier gabion wire, confirm the required fastener size before selecting the tool.
Yes. Because the tool is manually operated, it can be used at installation sites where compressed air or electrical power is unavailable.
A pneumatic tool may be more suitable when the application requires very frequent fastening during continuous factory production. The SC-7C is useful where portability, simple setup and manual operation are more important.
Provide the required quantity, destination country, application and hog ring dimensions. If replacing an existing tool or fastener, also provide the current model, ring measurements or clear product photos.
KYA Fasteners has more than 20 years of fastening-product manufacturing experience and exports to more than 50 countries, including the USA, Canada, the UK and Australia. The product listing states a one-year warranty and an MOQ of 100 units. OEM options listed for this product include custom color, logo and packaging.
The stated delivery estimate for the USA, EU, Australia and Canada is 15–25 days. Confirm current availability, lead time, warranty coverage and customization details for your order when requesting a quotation.
