KYA 1-1/4 in x 0.120 in Hot-Dip Galvanized Coil Roofing Nails are 15-degree wire-collated roofing fasteners designed for compatible pneumatic coil roofing nailers. The 1-1/4 inch (32mm) length and 0.120 inch (3.05mm) shank diameter make this size suitable for professional roofing and exterior fastening applications where consistent feeding, corrosion resistance and efficient installation are required.
The hot-dip galvanized (HDG) finish provides improved protection against rust and weather exposure compared with basic uncoated fasteners. Typical applications include asphalt and fiberglass shingles, roofing felt, waterproofing materials, insulation board, metal drip edges, cementitious fiber board and selected siding applications.
| Specification | Details |
|---|---|
| Product Type | Coil Roofing Nails |
| Nail Length | 1-1/4 in. / 32mm |
| Shank Diameter | 0.120 in. / 3.05mm |
| Collation Angle | 15 Degree |
| Collation Type | Wire Collated Coil |
| Material | Steel |
| Primary Finish | Hot-Dip Galvanized (HDG) |
| Primary Shank Type | Smooth Shank |
| Nails Per Coil | 120 pcs |
| Coils Per Carton | 60 coils |
| Standard Packing | 7,200 nails per carton |
| Compatible Tools | Compatible 15-degree coil roofing nailers that accept the required 1-1/4 in. length and 0.120 in. diameter |
| Main Applications | Asphalt shingles, fiberglass shingles, roofing felt, insulation board, drip edges and selected siding applications |
Before ordering, confirm that your roofing nailer accepts 15-degree wire-collated roofing nails with a 1-1/4 inch length and 0.120 inch shank diameter.
Request a Bulk Quote1-1/4 in. x 0.120 in. roofing nail size for common roofing fastening applications.
15-degree wire coil collation for efficient loading and feeding in compatible roofing nailers.
Hot-dip galvanized coating provides increased corrosion protection for exterior applications.
Steel construction provides consistent fastening performance for professional roofing work.
7,200 nails per carton is suitable for contractors, distributors, wholesalers and fastener importers.
Multiple roofing nail lengths, shank types and corrosion-resistant finishes are available for different applications.
These 15-degree hot-dip galvanized coil roofing nails are designed for rapid pneumatic fastening in roofing and selected exterior construction applications. The correct nail length and finish should always be selected according to the roofing material, substrate, local building requirements and nailer specifications.
Common applications include asphalt shingles, fiberglass shingles, roofing felt, waterproof tar paper, insulation board, metal drip edges, cementitious fiber board products and selected vinyl siding installations.
In addition to the 1-1/4 in. x 0.120 in. hot-dip galvanized roofing nail, KYA supplies other 0.120 inch coil roofing nail configurations for different roofing, siding and fastening requirements. Available combinations vary by nail length, shank design and corrosion-resistant finish.
| Length | Shank Diameter | Shank Type | Finish | Pcs/Box |
|---|---|---|---|---|
| 3/4 in. (19mm) | 0.120 in. (3.05mm) | Smooth | Electro-Galvanized | 7,200 |
| 7/8 in. (22mm) | 0.120 in. (3.05mm) | Smooth | Electro-Galvanized | 7,200 |
| 1 in. (25mm) | 0.120 in. (3.05mm) | Smooth | Electro-Galvanized | 7,200 |
| 1-1/4 in. (32mm) | 0.120 in. (3.05mm) | Smooth | Electro-Galvanized | 7,200 |
| 1-1/2 in. (38mm) | 0.120 in. (3.05mm) | Smooth | Electro-Galvanized | 7,200 |
| 1-3/4 in. (44mm) | 0.120 in. (3.05mm) | Smooth | Electro-Galvanized | 7,200 |
| 3/4 in. (19mm) | 0.120 in. (3.05mm) | Ring | Electro-Galvanized | 7,200 |
| 1-1/4 in. (32mm) | 0.120 in. (3.05mm) | Ring | Electro-Galvanized | 7,200 |
| 1-1/2 in. (38mm) | 0.120 in. (3.05mm) | Ring | Electro-Galvanized | 7,200 |
| 1 in. (25mm) | 0.120 in. (3.05mm) | Smooth | Hot-Dip Galvanized | 7,200 |
| 1-1/4 in. (32mm) | 0.120 in. (3.05mm) | Smooth | Hot-Dip Galvanized | 7,200 |
| 1-1/2 in. (38mm) | 0.120 in. (3.05mm) | Smooth | Hot-Dip Galvanized | 7,200 |
| 1-3/4 in. (44mm) | 0.120 in. (3.05mm) | Smooth | Hot-Dip Galvanized | 7,200 |
| 3/4 in. (19mm) | 0.120 in. (3.05mm) | Smooth | Stainless Steel (304) | 3,600 |
| 7/8 in. (22mm) | 0.120 in. (3.05mm) | Smooth | Stainless Steel (304) | 3,600 |
| 1 in. (25mm) | 0.120 in. (3.05mm) | Smooth | Stainless Steel (304) | 3,600 |
| 1-1/4 in. (32mm) | 0.120 in. (3.05mm) | Smooth | Stainless Steel (304) | 3,600 |
| 1-1/2 in. (38mm) | 0.120 in. (3.05mm) | Smooth | Stainless Steel (304) | 3,600 |
| 1-3/4 in. (44mm) | 0.120 in. (3.05mm) | Smooth | Stainless Steel (304) | 3,600 |
| 3/4 in. (19mm) | 0.120 in. (3.05mm) | Ring | Stainless Steel (316) | 3,600 |
| 7/8 in. (22mm) | 0.120 in. (3.05mm) | Ring | Stainless Steel (316) | 3,600 |
| 1 in. (25mm) | 0.120 in. (3.05mm) | Ring | Stainless Steel (316) | 3,600 |
| 1-1/4 in. (32mm) | 0.120 in. (3.05mm) | Ring | Stainless Steel (316) | 3,600 |
| 1-1/2 in. (38mm) | 0.120 in. (3.05mm) | Ring | Stainless Steel (316) | 3,600 |
| 1-3/4 in. (44mm) | 0.120 in. (3.05mm) | Ring | Stainless Steel (316) | 3,600 |
Need a different roofing nail length, shank design or finish? Contact KYA Fasteners with your nailer model, required dimensions, finish, order quantity and packaging requirements.
Get Roofing Nail PricingSmooth shank coil roofing nails are widely used for standard roofing applications. Their straight shank allows fast driving and consistent feeding in compatible pneumatic roofing nailers. The primary 1-1/4 in. x 0.120 in. HDG product on this page uses a smooth shank.
Ring shank nails have annular rings along the shank that increase withdrawal resistance. They are commonly selected when additional holding power is required for roofing, siding and other exterior fastening applications. Availability depends on nail length and finish.
Screw shank designs are also available within KYA's broader coil nail range for applications requiring different driving and holding characteristics. Confirm the required nail size, substrate and tool compatibility before ordering.
Hot-dip galvanized roofing nails have a zinc coating designed to provide stronger corrosion resistance for outdoor roofing and siding applications exposed to weather. This is the primary finish of the product featured on this page.
Electro-galvanized roofing nails use a thinner zinc coating and are available for applications where a different level of corrosion protection is appropriate. Always match the coating to the installation environment and project requirements.
304 stainless steel coil roofing nails provide increased corrosion resistance and are an option for more demanding exterior environments where galvanized steel may not provide the desired service life.
316 stainless steel roofing nails are intended for highly corrosive environments, including coastal or high-humidity applications where greater corrosion resistance is required. Confirm local building codes and roofing-system requirements before selecting the fastener.
For distributors, roofing contractors, building-material wholesalers and fastener importers, providing the complete nail specification helps KYA confirm compatibility and quote accurately.
| Information to Provide | Example |
|---|---|
| Nail Length | 1-1/4 in. / 32mm |
| Shank Diameter | 0.120 in. / 3.05mm |
| Collation | 15-degree wire coil |
| Shank Type | Smooth or ring shank |
| Finish | HDG, EG, 304SS or 316SS |
| Nailer Model | Provide your roofing nailer model for compatibility checking |
| Application | Asphalt shingles, siding, roofing felt, insulation board, etc. |
| Order Requirement | Quantity, packaging and customization requirements |
The 1-1/4 inch measurement is the nail length, while 0.120 inch is the shank diameter. In metric dimensions, this product is approximately 32mm long with a 3.05mm shank diameter.
Yes. These are designed as 15-degree wire-collated coil roofing nails for compatible pneumatic roofing nailers. Always verify the nail length, diameter and collation requirements of your specific tool before ordering.
They are commonly used for asphalt and fiberglass shingles, roofing felt, waterproofing materials, insulation board, drip edges and selected siding applications. The correct fastener must be selected according to the roofing system and local installation requirements.
Hot-dip galvanized roofing nails have a protective zinc coating that improves resistance to rust and corrosion. They are therefore commonly selected for roofing and exterior fastening applications exposed to weather.
Both finishes use zinc for corrosion protection, but hot-dip galvanizing generally provides a heavier protective coating for more demanding exterior exposure. The appropriate finish depends on the roofing material, environment and project requirements.
Standard packing for this coil roofing nail range is 120 nails per coil, 60 coils per carton, or 7,200 nails per carton. Other packaging requirements can be discussed with KYA Fasteners.
They are intended for compatible 15-degree coil roofing nailers. Before ordering, check that your tool accepts 15-degree wire-collated nails with a 1-1/4 inch length and 0.120 inch shank diameter. You can also send KYA your nailer model for compatibility confirmation.
Smooth shank roofing nails are commonly used for standard roofing installation, while ring shank nails provide increased withdrawal resistance. Selection should be based on the roofing material, substrate, holding-power requirement and applicable building specifications.
Yes. KYA's roofing nail range includes 304 stainless steel and 316 stainless steel options for applications requiring higher corrosion resistance. Available sizes and shank types vary by stainless steel grade.
Stainless steel roofing nails, particularly 316 stainless steel, are commonly selected for coastal, marine and highly corrosive environments. Always check roofing-system manufacturer requirements and local building codes before specifying a fastener.
Yes. KYA Fasteners supplies coil roofing nails for distributors, importers, building-material wholesalers, hardware suppliers and professional contractors. Buyers can contact KYA regarding required sizes, finishes, quantities and packaging options.
Sample requests can be discussed with KYA Fasteners so buyers can verify dimensions, finish, packaging and nailer compatibility before proceeding with a larger order.
Ask About Coil Roofing NailsKYA Fasteners supplies roofing nails and industrial fasteners to customers in more than 50 countries. For professional buyers, KYA can provide different roofing nail lengths, shank configurations, galvanized and stainless steel finishes, as well as packaging solutions for different market requirements.
If you are sourcing 1-1/4 inch hot-dip galvanized coil roofing nails, send your required quantity, nailer model, target market and packaging specifications to receive the appropriate product configuration and quotation.
Contact KYA Fasteners
