| Length: | |
|---|---|
| Surface Treatment: | |
| Quantity: | |
KYA 1-3/4" × .120" 15° wire-collated electro-galvanized ring shank coil roofing nails are designed for professional roofing applications requiring a full round head, .120" shank diameter and increased mechanical engagement with wood roof decking. The featured configuration measures approximately 45 × 3.05 mm and is supplied in coil format for compatible pneumatic roofing nailers.
The ring shank creates additional engagement with wood fibers compared with a comparable smooth shank fastener, making this configuration suitable for roofing installations where withdrawal resistance is an important part of the fastening specification. For high-wind roofing projects, always use the fastener type, quantity and fastening pattern specified by the roof covering manufacturer, project documents and applicable local requirements.
1-3/4" length: approximately 45 mm for compatible roofing assemblies requiring a longer roofing nail.
.120" shank diameter: approximately 3.05 mm.
Ring shank: provides increased mechanical engagement with wood substrates compared with a comparable smooth shank.
15° wire coil: configured for compatible pneumatic coil roofing nailers.
Full round head: provides a broad bearing surface for roofing materials.
Electro-galvanized finish: zinc-coated surface providing corrosion protection appropriate to the specified application.
7,200-count packing: current page-listed box quantity; confirm final packing configuration when ordering.
| Parameter | Specification |
|---|---|
| Product Type | Coil Roofing Nail |
| Length | 1-3/4" / approximately 45 mm |
| Shank Diameter | .120" / approximately 3.05 mm |
| Shank Type | Ring Shank |
| Collation Angle | 15° Nominal Wire Coil |
| Collation Type | Wire Collated Coil |
| Head Type | Full Round Head |
| Finish | Electro-Galvanized |
| Page-Listed Box Quantity | 7,200 pcs |
| Typical Application | Asphalt shingles and compatible roofing assemblies over wood decking |
| Listed Tool Examples | Bostitch RN46, Metabo HPT / Hitachi NV45AB2, MAX CN445R series; verify exact tool specifications before ordering |
KYA supplies roofing coil nails in different lengths, shank configurations and finishes. The appropriate specification should be selected according to the roof covering, deck material, environmental exposure and project requirements.
| Length | Shank Diameter | Available Shank | Finish Options in Range | Page-Listed Quantity |
|---|---|---|---|---|
| 1-3/4" | .120" | Ring | EG / HDG / 304 Stainless Steel | 7,200 pcs |
| 1-1/2" | .120" | Ring / Smooth | EG / HDG / 304 Stainless Steel | 7,200 pcs |
| 1-1/4" | .120" | Ring / Smooth | EG / HDG / 304 Stainless Steel | 7,200 pcs |
| 1" | .120" | Ring / Smooth | EG / HDG / 304 Stainless Steel | 7,200 pcs |
| 7/8" | .120" | Ring / Smooth | EG / 304 / 316 Stainless Steel | 7,200 pcs |
Finish and size availability can vary by product configuration. Confirm the required combination when requesting a quotation.
Ring shank nails have annular grooves along the shank. When the fastener is driven into wood decking, the surrounding wood fibers engage with these grooves, increasing resistance to withdrawal compared with a comparable smooth shank fastener.
This characteristic can be useful in roofing assemblies where secure attachment is important, including projects exposed to elevated wind loads. The nail itself, however, is only one part of the complete roof assembly. Wind performance also depends on the roof covering, deck, fastening pattern, edge and corner zones, substrate condition and installation method.
For roofing projects in high-wind or hurricane-prone regions, select fasteners according to the approved roof system, roof covering manufacturer's installation instructions, project engineering documents and applicable local requirements.
The 1-3/4" length, .120" diameter and ring shank make this configuration relevant for roofing applications where these fastener dimensions are specified. Do not substitute nail length, shank type, coating or fastening pattern without confirming the requirements of the installed roof system.
Request Roofing Nail Specifications
Asphalt shingles: when the fastener dimensions and fastening pattern meet the shingle manufacturer's instructions.
Roofing felt: where roofing nails of this configuration are specified.
Wood roof decking: plywood and OSB substrates compatible with the specified roofing system.
Re-roofing projects: when the additional fastener length is required by the approved installation method.
High-wind roof systems: where ring shank roofing nails of the specified dimensions and finish are required by the roof assembly or project documents.
Fastener length must provide the penetration required by the applicable roof covering manufacturer and installation specification. The correct nail length can therefore vary with shingle thickness, underlayment, existing roof layers and roof deck configuration.
Corrosion protection should be selected according to the roofing material, deck material, moisture exposure and project requirements. Different finish options are available within KYA's roofing nail range.
| Finish | Selection Consideration |
|---|---|
| Electro-Galvanized | Zinc-coated finish providing corrosion protection for applications where EG fasteners are permitted. |
| Hot-Dip Galvanized | Heavier galvanized coating option for applications requiring increased corrosion protection. |
| 304 Stainless Steel | Higher corrosion-resistance option for applications where the specified roof system requires stainless steel. |
| 316 Stainless Steel | Available within selected roofing nail configurations for demanding corrosive environments when specified. |
Electro-galvanized, hot-dip galvanized and stainless steel fasteners are not interchangeable in every roof assembly. Always confirm the required corrosion protection before ordering.
The featured fastener dimensions fall within the published fastener ranges of several professional coil roofing nailers. Compatibility should still be confirmed against the exact tool model before purchase.
| Tool Example | Published Fastener Range Relevant to This Nail |
|---|---|
| Bostitch RN46 | Roofing coil nails up to 1-3/4" length with .120" shank diameter. |
| Metabo HPT / Hitachi NV45AB2 | Wire-collated roofing nails from 7/8" to 1-3/4" with .120" diameter. |
| MAX CN445R Series | Compatible roofing coil nail range includes .120" smooth and ring shank nails up to 1-3/4". |
Also verify coil diameter, head diameter, collation configuration and magazine capacity. A tool accepting 1-3/4" × .120" roofing nails does not necessarily mean every coil configuration is interchangeable.
For an accurate quotation, provide your required nail length, shank type, finish, quantity, destination market, roofing application and pneumatic nailer model. If the project is governed by a specific roof system approval or local requirement, include that documentation so the required fastener specification can be checked before ordering.
KYA supplies roofing coil nails in multiple lengths, shank styles and corrosion-resistant finishes for distributors, roofing fastener suppliers and professional contractors.
Request Pricing and Packing Details
The featured roofing nail measures 1-3/4" long with a .120" shank diameter, approximately 45 × 3.05 mm.
The annular rings increase mechanical engagement between the nail shank and wood fibers. This generally provides greater resistance to withdrawal than a comparable smooth shank nail.
Ring shank roofing nails are used in roofing applications where increased withdrawal resistance is required. For a high-wind project, the specific nail size, material, coating and fastening pattern must match the approved roof system, manufacturer instructions and applicable local requirements.
Miami-Dade roofing fastener listings apply to specific approved products and manufacturers. If a project requires a Miami-Dade Notice of Acceptance or Product Control listing, confirm that the exact supplied fastener is included in the applicable approval documentation before purchase or installation.
Texas windstorm projects must follow applicable TDI requirements and the roof covering manufacturer's installation instructions. Confirm the required fastener specification and approved roof covering system for the individual project rather than relying only on nail dimensions.
The current product information lists 7,200 nails per box. Confirm the final coil, box and carton configuration when requesting a quotation.
Coverage cannot be determined from nail count alone. It varies with shingle dimensions, the number of fasteners required per shingle, roof geometry, waste and the fastening pattern specified for the roofing system.
The published RN46 fastener range includes roofing coil nails up to 1-3/4" long with a .120" shank diameter. Confirm the coil and head configuration against the exact tool before use.
The NV45AB2 is specified for wire-collated roofing nails from 7/8" through 1-3/4" with a .120" diameter. Confirm all fastener dimensions and collation details before installation.
No. The required corrosion protection depends on the roof covering, substrate, moisture exposure and project specifications. Hot-dip galvanized or stainless steel fasteners may be required in applications where greater corrosion resistance is specified.
Provide the required quantity, destination market, nail length, shank type, required finish, roofing application, pneumatic nailer model and any project-specific fastener requirements.
KYA supplies 15° wire collated coil roofing nails for roofing fastener distributors, wholesalers and professional contractors. For this 1-3/4" × .120" electro-galvanized ring shank roofing nail, send your required quantity, application, destination, tool model and finish requirements to confirm the appropriate supply configuration.
