| Length: | |
|---|---|
| Surface Treatment: | |
| Quantity: | |
KYA 15 Degree Shingle Roofing Nails 1-3/4" x .120" are wire-collated coil roofing nails designed for compatible pneumatic roofing nailers. The featured configuration has a 1-3/4 inch nominal length, .120 inch (3.05mm) shank diameter, smooth shank, full round head and electro-galvanized finish.
Each coil contains 120 nails, with 60 coils per carton for a published total of 7,200 nails per carton. The 15-degree wire-collated format is intended for roofing nailers that accept the matching nail length, diameter, head style and collation.
| Parameter | Specification |
|---|---|
| Product Type | Coil Roofing Nail |
| Nominal Length | 1-3/4" (approximately 44.5mm) |
| Shank Diameter | .120" (3.05mm) |
| Collation Angle | 15° |
| Collation Type | Wire-Collated Coil |
| Shank Type | Smooth Shank |
| Head Type | Full Round Head |
| Finish | Electro-Galvanized |
| Nails per Coil | 120 pcs |
| Coils per Carton | 60 coils |
| Nails per Carton | 7,200 pcs |
| Typical Applications | Roofing shingles, underlayment, insulation board and other applications approved for compatible coil roofing nails |
The specifications above describe the featured 1-3/4" smooth-shank electro-galvanized configuration. Other lengths, shank styles and materials in the KYA roofing nail family are separate purchasing configurations.
The full round head provides a broad bearing surface for compatible roofing materials. The smooth shank is designed for efficient pneumatic driving where a smooth-shank roofing fastener is specified or permitted.
For applications requiring increased withdrawal resistance, a ring-shank roofing nail may be specified instead. Shank selection should follow the roofing material manufacturer, fastening schedule and applicable project requirements.
The nails are assembled in wire-collated coils for use in compatible pneumatic roofing nailers. The published packaging configuration is 120 nails per coil.
Before purchasing, verify the nailer's accepted nail length, shank diameter, head dimensions and wire-coil format. A matching nominal angle alone does not confirm complete tool compatibility.
KYA publishes multiple roofing nail lengths, shank styles and material or finish configurations. The highlighted row represents the featured 1-3/4" smooth-shank product.
| Length | Shank Diameter | Shank Type | Published Options | Carton Quantity |
|---|---|---|---|---|
| 1-3/4" | .120" | Smooth | Electro-Galvanized / Hot-Dip Galvanized / 304 Stainless Steel | 7,200 pcs |
| 1-1/2" | .120" | Smooth / Ring | Electro-Galvanized / Hot-Dip Galvanized / 304 Stainless Steel | 7,200 pcs |
| 1-1/4" | .120" | Smooth / Ring | Electro-Galvanized / Hot-Dip Galvanized / 304 Stainless Steel | 7,200 pcs |
| 1" | .120" | Smooth / Ring | Electro-Galvanized / Hot-Dip Galvanized / 304 Stainless Steel | 7,200 pcs |
| 7/8" / 3/4" | .120" | Smooth / Ring | Electro-Galvanized / 304 Stainless Steel / 316 Stainless Steel | 7,200 pcs |
The table represents published family configurations. Confirm the exact length, shank type, material, finish and packing requirement when requesting a quotation.
The featured product uses an electro-galvanized finish. The zinc coating provides basic corrosion protection compared with uncoated bright steel.
Electro-galvanized fasteners should not automatically be treated as suitable for every exterior, coastal, chemically treated or highly corrosive application. Select the fastener material and coating according to the roofing manufacturer's requirements, substrate, exposure conditions and applicable project specifications.
| Material / Finish | Selection Consideration |
|---|---|
| Electro-Galvanized | Featured configuration on this page. Provides zinc-coated steel with basic corrosion protection. |
| Hot-Dip Galvanized | Separate family configuration where a different galvanized coating specification is required. |
| 304 Stainless Steel | Separate stainless steel configuration published for selected roofing nail sizes, including 1-3/4". |
| 316 Stainless Steel | Published for selected shorter sizes in the current product-family table. Confirm the required size and current availability before ordering. |
The 1-3/4" length can be considered where the roofing assembly and fastening specification require greater nail length than shorter roofing nail sizes. Final nail selection should be based on required penetration and the roofing system being installed.
Asphalt shingle installation
Architectural shingle installation where the specified nail length is suitable
Roofing felt and compatible underlayment
Insulation board fastening with compatible roofing nailers
Re-roofing applications where the required penetration calls for a longer fastener
Selected siding and soft-material fastening applications approved for roofing coil nails
Before installation, confirm the roofing manufacturer's required nail length, minimum deck penetration, nail placement, number of fasteners and corrosion-resistance requirements.
These fasteners are intended for compatible wire-coil roofing nailers that accept the required nail dimensions and collation format.
For example, the MAX CN445R3 is published for 15-degree wire-collated roofing nails with a .120" shank diameter and a nail length range of 3/4" to 1-3/4". Compatibility with any nailer should still be confirmed against the current tool manual before bulk purchasing.
Do not determine compatibility from a tool brand alone. Different roofing nailer models can use different angle designations, fastener lengths, head diameters or collation specifications.
The featured nail is 1-3/4" long. Select this length only when it provides the required penetration for the roofing assembly and substrate.
The published shank diameter is .120" (3.05mm). Confirm that the exact roofing nailer accepts this diameter.
This product is a smooth-shank configuration. If the roofing specification calls for increased withdrawal resistance or specifically requires ring-shank nails, select the appropriate ring-shank product instead.
The featured product is electro-galvanized. Where the project requires another coating or stainless steel fastener, specify the applicable material and finish rather than assuming the EG version is interchangeable.
Confirm the nailer's accepted length, diameter, head style, magazine capacity and wire-collation format before placing a bulk order.
Required nail length: 1-3/4"
Required shank diameter: .120" / 3.05mm
Required shank type: Smooth
Required finish: Electro-Galvanized or another published configuration
Required quantity
Roofing nailer brand and exact model
Roofing material and substrate
Required corrosion-protection level
Delivery destination
Send Your Roofing Nail Requirements
The featured nails are 1-3/4" long with a .120" (3.05mm) shank diameter. The nominal 1-3/4" length converts to approximately 44.5mm.
This specific product is a smooth-shank roofing nail. Ring-shank nails are separate configurations within the KYA roofing nail family.
The featured configuration uses an electro-galvanized finish.
The published packaging is 120 nails per coil and 60 coils per carton, giving a total of 7,200 nails per carton.
Not automatically. Confirm that the exact tool accepts the required wire-collated roofing nail format, 1-3/4" length, .120" shank diameter and applicable head dimensions.
MAX publishes the CN445R3 for 15-degree wire-collated roofing nails from 3/4" to 1-3/4" with a .120" shank diameter. Confirm the current tool manual and required head dimensions before ordering.
A longer roofing nail may be required where the roofing assembly needs greater fastener penetration. The correct length depends on the roofing material, substrate thickness and applicable fastening requirements.
No. Electro-galvanizing provides basic corrosion protection, but the required coating or material depends on roofing materials, substrate, environmental exposure and applicable specifications.
The published KYA roofing nail family includes hot-dip galvanized configurations. Confirm the required length, shank style and current product configuration when requesting a quotation.
The current family information lists 304 stainless steel for selected sizes including 1-3/4". It lists 316 stainless steel for selected shorter sizes. Confirm the exact required length and stainless steel grade before ordering.
Coverage should be calculated from the roofing manufacturer's required fastening pattern rather than from a fixed universal figure. Nail quantity per roofing square varies with shingle type, fastening schedule and project requirements.
KYA supplies coil roofing nails for fastener distributors, roofing-product suppliers, building-material wholesalers, importers and professional users. Send the required nail dimensions, shank type, finish, quantity, nailer model and delivery destination for product confirmation and quotation.
