KYA 20 Gauge Pneumatic Staple Gun 1013 7/16 Crown is a lightweight air stapler designed for upholstery, furniture trim, automotive vinyl, fabric fastening, picture frame assembly, cabinet work, bedding, crafts, interior trim, and light-duty fastening applications. With a compact 0.88kg / 1.94lbs body, ergonomic rubber grip, 360° adjustable exhaust, and lengthened thin muzzle, this pneumatic staple gun is built for flexible operation and reduced operator fatigue.
The 1013 staple gun drives 20 gauge 10 Series fine wire staples with a 7/16 inch / 11.2mm crown and 5mm-13mm staple length. It operates at 60-100 psi / 4-7 bar and holds 100 staples per load. Tool-free depth adjustment, open nose jam clearing, and a hardened claw tip help improve fastening accuracy, service efficiency, and durability in professional upholstery and trim work.
The following specifications help upholstery factories, furniture manufacturers, automotive interior workshops, cabinet shops, trim installers, pneumatic tool distributors, staple suppliers, and fastener importers confirm tool size, weight, operating pressure, staple capacity, compatible staple type, crown width, shank size, and staple length before ordering.
| Model | 20 Gauge 7/16 Crown Pneumatic Staple Gun 1013 |
| Product Type | Pneumatic Staple Gun / Air Stapler / Fine Wire Stapler |
| Tool Type | Air Stapler |
| Dimensions | 146mm x 44mm x 229mm / 5-3/4" x 1-3/4" x 9" |
| Weight | 0.88kg / 1.94lbs |
| Operating Pressure | 60-100 psi / 4-7 bar |
| Load Capacity | 100 Staples |
| Staple Type | 20 Gauge 10 Series Fine Wire Staples |
| Staple Crown | 7/16" / 11.2mm |
| Staple Shank Diameter | 0.050" x 0.022" / 1.26mm x 0.55mm |
| Staple Length | 1/5" / 5mm to 1/2" / 13mm |
| Main Applications | Upholstery, furniture trim, automotive vinyl, fabric fastening, picture frames, cabinet work, bedding, crafts |
| Lightweight 0.88kg Body | Compact and lightweight design supports easy handling during upholstery, trim, and craft fastening work. |
| 20 Gauge 10 Series Staples | Drives 7/16 inch crown fine wire staples from 5mm to 13mm for precision fastening. |
| Tool-Free Depth Adjustment | Allows operators to adjust fastening depth for flush or countersunk stapling on different materials. |
| Lengthened Thin Muzzle | Helps improve access and control in tight trim, upholstery, and cabinet work areas. |
| Open Nose Design | Supports easier jam clearing and faster maintenance without complicated disassembly. |
| 360° Adjustable Exhaust | Redirects exhaust away from the operator and work surface for improved comfort. |
| Hardened Claw Tip | Reduces wear and slippage, improving durability and fastening control during repeated use. |
The 1013 pneumatic staple gun is suitable for light-duty and precision fastening tasks where fine wire staples, clean fastening, and easy handling are required. It is commonly used by upholstery workshops, furniture factories, automotive interior shops, cabinet makers, craft producers, trim installers, and pneumatic tool distributors.
| Decorative and Furniture Trim | Used for fastening decorative trim, furniture trim, fabric edges, and light wood components. |
| Picture Frame Assembly | Suitable for light fastening in picture frames and decorative frame production. |
| Interior and Exterior Trim | Used for trim fastening where fine wire staples and precise control are required. |
| Cabinet Work | Suitable for cabinet backing, light trim, thin panels, and related cabinet finishing tasks. |
| Upholstery and Bedding | Used for upholstery fabric, bedding, automotive vinyl, sofa fabric, and furniture covering applications. |
| Craft Projects | Useful for craft production, DIY fastening, decorative assembly, and light material fixing. |
The 1013 pneumatic staple gun is designed for 20 gauge 10 Series fine wire staples. Before bulk use, buyers should confirm staple crown, wire size, staple length, material, finish, and application material to ensure smooth feeding and stable fastening.
| Staple Series | 10 Series Fine Wire Staples |
| Gauge | 20 Gauge |
| Crown | 7/16" / 11.2mm |
| Wire Size | 0.050" x 0.022" / 1.26mm x 0.55mm |
| Staple Length | 5mm-13mm / 1/5"-1/2" |
The following troubleshooting guide helps maintenance teams identify common pneumatic staple gun issues such as air leaks, driver return failure, trigger valve problems, worn o-rings, damaged seals, and lubrication-related problems.
| No. | Symptom | Possible Problem | Solution |
|---|---|---|---|
| 1.1 | Air leak in cylinder cap when tool is idle | Loose head valve piston seal or o-rings | Check and replace head valve piston set |
| 1.1 | Air leak in cylinder cap when tool is idle | Worn or damaged o-ring or cylinder cap gasket | Check and replace o-ring or cylinder cap gasket |
| 1.2 | Air leak in trigger area when tool is idle | Damaged o-ring in trigger valve | Check and replace o-ring |
| 1.2 | Air leak in trigger area when tool is idle | Damaged o-ring in trigger valve stem | Check and replace o-ring |
| 1.2 | Air leak in trigger area when tool is idle | Dirt in trigger valve | Check and clean trigger valve |
| 1.3 | Air leak in cylinder cap when tool is working | Damaged head valve piston o-rings | Check and replace o-rings |
| 1.3 | Air leak in cylinder cap when tool is working | Damaged seal under cylinder cap | Check and replace seal |
| 1.4 | Air leak in nose when tool is working | Worn or damaged bumper | Check and replace bumper |
| 1.4 | Air leak in nose when tool is working | Loose driver piston unit thread | Check and replace driver piston unit |
| 1.5 | Air leak in trigger area when tool is working | Worn or damaged trigger valve head | Check and replace trigger valve head |
| 1.5 | Air leak in trigger area when tool is working | Damaged head valve piston o-rings | Check and replace head valve piston o-rings |
| 2 | Driver piston unit fails to return fully | Driver piston unit not straight or misassembled driver guide nose | Straighten driver or verify driver guide and magazine |
| 2 | Driver piston unit fails to return fully | Worn or damaged nozzle | Check and replace nozzle |
| 2 | Driver piston unit fails to return fully | Tight piston o-ring and cylinder space | Check cylinder lubrication or replace piston o-ring |
For stable performance, use clean dry compressed air, keep operating pressure within 60-100 psi, apply proper pneumatic tool oil, clean the magazine and nose regularly, check o-rings and seals for wear, and use compatible 20 gauge 10 Series staples. Incorrect staple size, poor lubrication, dirty air supply, or worn internal parts can cause air leaks, weak driving, or staple jams.
KYA Fasteners supplies 1013 pneumatic staple guns, 20 gauge air staplers, fine wire staplers, 10 Series staples, upholstery staplers, pneumatic staplers, brad nailers, coil nailers, staples, nails, hog rings, and industrial fastening solutions for global B2B customers. For upholstery factories, furniture manufacturers, cabinet shops, automotive trim workshops, craft producers, tool dealers, and fastener importers, KYA can support tool selection, compatible staple matching, sample requests, spare parts consultation, bulk quotation, and export supply.
Contact KYA Fasteners to request 20 Gauge Pneumatic Staple Gun 1013 specifications, compatible staple details, spare parts support, quotation, and shipping information.
It is used for upholstery, furniture trim, automotive vinyl, fabric fastening, picture frame assembly, cabinet work, bedding, crafts, and light-duty trim applications.
It uses 20 gauge 10 Series fine wire staples with a 7/16 inch / 11.2mm crown and 5mm-13mm length.
The operating pressure is 60-100 psi / 4-7 bar.
The load capacity is 100 staples.
It has a lightweight 0.88kg body, ergonomic rubber grip, compact design, and 360° adjustable exhaust to improve comfort during extended use.
Yes. The tool-free depth adjustment allows flush or countersunk stapling according to the material and application requirement.
The open nose design allows easier access for clearing jammed staples. Always disconnect the air supply before clearing jams or performing maintenance.
Check the head valve piston seal, o-rings, cylinder cap gasket, trigger valve o-rings, and seals. Replace worn or damaged parts as needed.
Yes. KYA Fasteners can support compatible 10 Series staple selection, spare parts consultation, sample requests, quotation, and export supply.
