| Price: | |
|---|---|
| Quantity: | |
21 Ga Tie Wire Coils for Rebar Tying Machine
|
| Model No.: | 21 Ga Tie Wire Coils for Rebar Tying Machine |
| Diameter: | 0.8MM |
| Length: | 100M |
| Net weight: | 0.4kg/ reel |
| Material Code: | Q195, Galvanized Wire |
| Description: | Galvanized Wire (for Automatic Rebar Tying Machine) |
| Chemical Composition: | C, Si, Mn, P, S |
| Wire Tensile Strength | 350-400 MPA |
| Temper: | Soft |
| Condition of Sectional Area: | Round |
| Tensile Strength: | 42-47 KG/CM2 |
| Elongation: | 23% - 27% |
| Dimensions (L x W x H): | 8.5cm x 2.5cm x 8.5cm per Tie Wire Coil |
| Wire length for one knot: | 50-40cm.One reel can tie 120 to 190knots |
Details:
BLACK ANNEALED
This low carbon steel, dead soft annealed wire is coated with a black oxide finish to provide a thin, mildly corrosion-resistant finish. This commonly used wire meets most construction, precast, and pre-stressed concrete industry applications.
ELECTRO-GALVANIZED
This low carbon steel, dead soft annealed wire is finished with a 5-micron zinc coating to provide greater corrosion resistance. It is ideal for precast or pre-stressed concrete used in marine or other harsh environment applications, or where length of service is important.
PLASTIC COATED
This low carbon steel, dead soft annealed wire is powder-coated with .05mm thickness of yellow polymer (polyester). It is used when tying epoxy coated rebar or other DOT mandated uses, or anywhere a cushioned wire with added protection against corrosion or abrasives is needed.
1) Precast concrete products,
2) building foundations,
3) road and bridge construction,
4) floors and walls,
5) retaining walls,
6) swimming pool walls,
7) radiant heating tubes,
8) electrical conduits
21 Ga Tie Wire Coils for Rebar Tying Machine
|
| Model No.: | 21 Ga Tie Wire Coils for Rebar Tying Machine |
| Diameter: | 0.8MM |
| Length: | 100M |
| Net weight: | 0.4kg/ reel |
| Material Code: | Q195, Galvanized Wire |
| Description: | Galvanized Wire (for Automatic Rebar Tying Machine) |
| Chemical Composition: | C, Si, Mn, P, S |
| Wire Tensile Strength | 350-400 MPA |
| Temper: | Soft |
| Condition of Sectional Area: | Round |
| Tensile Strength: | 42-47 KG/CM2 |
| Elongation: | 23% - 27% |
| Dimensions (L x W x H): | 8.5cm x 2.5cm x 8.5cm per Tie Wire Coil |
| Wire length for one knot: | 50-40cm.One reel can tie 120 to 190knots |
Details:
BLACK ANNEALED
This low carbon steel, dead soft annealed wire is coated with a black oxide finish to provide a thin, mildly corrosion-resistant finish. This commonly used wire meets most construction, precast, and pre-stressed concrete industry applications.
ELECTRO-GALVANIZED
This low carbon steel, dead soft annealed wire is finished with a 5-micron zinc coating to provide greater corrosion resistance. It is ideal for precast or pre-stressed concrete used in marine or other harsh environment applications, or where length of service is important.
PLASTIC COATED
This low carbon steel, dead soft annealed wire is powder-coated with .05mm thickness of yellow polymer (polyester). It is used when tying epoxy coated rebar or other DOT mandated uses, or anywhere a cushioned wire with added protection against corrosion or abrasives is needed.
1) Precast concrete products,
2) building foundations,
3) road and bridge construction,
4) floors and walls,
5) retaining walls,
6) swimming pool walls,
7) radiant heating tubes,
8) electrical conduits
