| Length: | |
|---|---|
| Material: | |
| Color: | |
| Quantity: | |
KYA 7110 galvanized upholstery staples are 22 gauge 71 Series fine wire staples with a nominal 9.0 mm / 3/8" crown and a 10 mm / 3/8" leg length. The fine-wire design is intended for professional upholstery, furniture production, automotive trim, screening and other light-material fastening applications.
The featured 7110 configuration uses galvanized steel wire with a zinc-plated surface and a chisel point. The electro-galvanized finish provides corrosion resistance for applications where this finish is suitable and is recommended primarily for interior use.
Each strip contains approximately 179 staples, with 10,000 staples per box and 20 boxes per carton listed for the current product configuration.
22 gauge fine wire: compact wire profile for upholstery fabric, vinyl and other relatively thin materials.
9.0 mm crown: nominal 3/8" crown common to the 71 Series fine-wire staple system.
10 mm leg: 7110 / 71/10 configuration with approximately 3/8" leg length.
0.75 × 0.55 mm wire profile: fine-wire dimensions listed for this staple series.
Chisel point: designed for efficient penetration into compatible substrates.
Electro-galvanized finish: zinc-plated surface for applications where galvanized fine-wire staples are specified.
Glue collated: supplied in strips for compatible pneumatic upholstery staplers.
10,000 pcs per box: packaging suitable for furniture factories, upholstery workshops and distributors.
| Parameter | Specification |
|---|---|
| Product | 7110 Galvanized Upholstery Staples |
| Staple Series | 71 Series / 71/10 |
| Gauge | 22 Gauge |
| Crown | 9.0 mm / approximately .354" / nominal 3/8" |
| Leg Length | 10 mm / 3/8" |
| Wire Width | 0.75 mm / approximately .029" |
| Wire Thickness | 0.55 mm / approximately .022" |
| Point | Chisel Point |
| Featured Material | Galvanized Steel Wire |
| Surface Finish | Zinc Plated / Electro-Galvanized |
| Collation | Glue Collated |
| Pieces per Stick | 179 pcs |
| Pieces per Box | 10,000 pcs |
| Boxes per Carton | 20 boxes |
| Page-Listed Compatible Families | PREBENA V, PASLODE L3G, BeA 71, SENCO C, KIHLBERG 670, Omer 3G, Haubold 7100, ATRO 7, Duo-Fast 7 |
The 7110 designation refers to the 10 mm / 3/8" leg version within the broader 71 Series. Other 71 Series leg lengths are available separately and should not be confused with the specific 7110 configuration.
In addition to the featured 71/10 / 7110 staple, KYA's 71 Series includes multiple leg lengths from 4 mm to 16 mm. This allows upholstery and furniture manufacturers to select the penetration depth required for different materials and substrates.
| Model | Leg Length | Pcs / Stick | Pcs / Box | Boxes / Carton | Cartons / Pallet |
|---|---|---|---|---|---|
| 71/04 | 4 mm / 5/32" | 179 | 10,000 | 20 | 60 |
| 71/06 | 6 mm / 1/4" | 179 | 10,000 | 20 | 60 |
| 71/08 | 8 mm / 5/16" | 179 | 10,000 | 20 | 60 |
| 71/10 / 7110 | 10 mm / 3/8" | 179 | 10,000 | 20 | 60 |
| 71/12 | 12 mm / 1/2" | 179 | 10,000 | 20 | 40 |
| 71/14 | 14 mm / 9/16" | 179 | 10,000 | 20 | 40 |
| 71/16 | 16 mm / 5/8" | 179 | 10,000 | 20 | 40 |
The staple dimensions across this series use the same listed 22 gauge, 9.0 mm crown and 0.75 × 0.55 mm wire profile. Select the leg length according to the material thickness, required substrate penetration and the fastener range of the stapler.
Request Sizes and Packing Details
Fine wire staples use a relatively small wire cross-section compared with heavier construction staples. This makes them suitable for fastening fabric, vinyl, backing cloth and other thin materials where a compact staple profile is desirable.
The 9.0 mm crown provides contact across the material, while the 10 mm legs of the 7110 configuration provide penetration into a compatible furniture or upholstery substrate.
Actual fastening performance depends on the substrate, material thickness, staple length, pneumatic pressure and stapler adjustment. Operators should set the tool so the crown seats securely without unnecessarily cutting or damaging the covering material.
Furniture upholstery: fastening fabric, backing material and suitable upholstery components to compatible frames.
Automotive upholstery: attaching vinyl, fabric and selected interior trim materials.
Furniture trim: light trim and covering attachment in furniture manufacturing.
Bedding production: fastening light fabric and covering materials in compatible mattress and furniture processes.
Screening: attaching suitable screen material to compatible frames.
Insulation: fastening suitable insulation facing and light materials.
Roofing felt: applications where this fine-wire staple size is suitable for the specified installation method.
House wrap: temporary or specified fastening to compatible substrates.
Picture frames and crafts: selected backing and light assembly applications.
Molding: light-duty fastening where 22 gauge fine-wire staples are appropriate.
The featured 7110 staple uses galvanized steel with a zinc-plated surface. The zinc coating helps reduce corrosion compared with untreated steel and provides a clean finish for furniture and upholstery manufacturing.
The current product specification recommends the electro-galvanized version primarily for interior applications. It should not be described as rust-proof or assumed to have the same corrosion resistance as stainless steel.
Different materials are listed within KYA's 71 Series range. Buyers should specify the required material rather than assuming all versions have the same corrosion resistance or mechanical characteristics.
| Material | Selection Consideration |
|---|---|
| Galvanized Steel | Featured 7110 configuration for general upholstery and interior production applications. |
| Stainless Steel | Separate material option within the 71 Series for applications requiring greater corrosion resistance. |
| Aluminum | Alternative material option within the product range for compatible applications. |
If moisture exposure or corrosion resistance is an important purchasing requirement, specify the required material and application when requesting a quotation.
The 7110 belongs to the widely used 71 Series / C-style fine-wire staple family. Compatibility should be confirmed using crown width, wire dimensions and leg length rather than the product name alone.
| Tool / Staple Family | Compatibility Reference |
|---|---|
| BeA 71 | Common 71 Series upholstery staple system. Confirm the exact stapler and accepted leg length. |
| SENCO C | Common cross-reference for 22 gauge 3/8" crown fine-wire staples. |
| Omer 3G | Omer identifies the 3G fastener format as equivalent to BeA 71 and SENCO C. |
| PREBENA V | Listed on the current KYA product page as a corresponding staple family. |
| KIHLBERG 670 | Listed as a compatible fine-wire staple family. |
| Haubold 7100 | Listed as a corresponding 71 Series staple format. |
| ATRO 7 | Listed within the current product's compatible tool references. |
| Duo-Fast 7 | Listed as a corresponding fine-wire staple format. |
| PASLODE L3G | Listed on the current KYA product information; confirm the exact tool specification before ordering. |
For the featured 7110 staple, the tool should accept approximately 9.0 mm / 3/8" crown, 22 gauge fine-wire staples with a 10 mm / 3/8" leg.
A stapler that accepts some 71 Series fasteners does not automatically accept the entire 4–16 mm length range. Check the minimum and maximum staple length specified for the exact tool.
The main difference between 71/04, 71/06, 71/08, 71/10, 71/12, 71/14 and 71/16 is the leg length. Crown and wire dimensions remain within the same listed 71 Series format.
Shorter staples are generally selected for thinner materials or shallower penetration requirements, while longer staples provide additional penetration where the substrate, material thickness and tool specification permit.
The featured 7110 / 71/10 provides a 10 mm leg and should be selected when that penetration depth is appropriate for the assembly.
Staple length should be selected according to the thickness of the fabric or covering, padding layers, substrate density and required penetration. The pneumatic stapler must also be capable of accepting the selected length.
| Selection Item | What to Check |
|---|---|
| Covering Material | Fabric, vinyl, backing cloth, screening or other material being attached. |
| Material Thickness | Combined thickness of fabric, padding and intermediate layers. |
| Substrate | Wood, engineered wood or other compatible supporting material. |
| Required Penetration | Choose sufficient penetration without using an unnecessarily long staple. |
| Tool Capacity | Confirm the minimum and maximum staple lengths accepted by the exact stapler. |
The current KYA specification lists 179 staples per stick, 10,000 staples per box and 20 boxes per carton. For the 71/10 configuration, the current table lists 60 cartons per pallet.
For bulk purchasing, provide the required staple model, quantity, material, destination market and compatible stapler information so the correct product and packing configuration can be confirmed.
The featured 7110 is a 22 gauge 71 Series staple with a 9.0 mm / nominal 3/8" crown and a 10 mm / 3/8" leg.
Within this product family, 7110 / 71/10 refers to the 10 mm leg version of the 71 Series. When cross-referencing another manufacturer, also compare crown width and wire dimensions.
They are 22 gauge fine-wire staples. The KYA specification lists approximately 0.75 mm wire width and 0.55 mm wire thickness.
The listed crown is 9.0 mm / .354", commonly described as a nominal 3/8" crown in the 71 Series staple category.
Yes. The featured product uses galvanized steel wire with a zinc-plated electro-galvanized finish. The current product information recommends this finish primarily for interior applications.
No. Galvanizing provides corrosion protection, but galvanized steel should not be described as completely rust-proof. Stainless steel versions are available separately within the 71 Series for applications requiring greater corrosion resistance.
Typical applications include furniture upholstery, automotive vinyl and trim, bedding, screening, insulation, furniture trim, picture frames, crafts, roofing felt and related light-material fastening.
BeA 71 is one of the commonly referenced tool families for this staple format. Confirm that the exact stapler model accepts 22 gauge, approximately 9.0 mm crown staples with a 10 mm leg.
SENCO C is commonly cross-referenced with the 71 Series fine-wire format. Compatibility should still be confirmed using crown width, wire dimensions and leg length for the exact stapler.
Omer identifies its 3G staple format as equivalent to BeA 71 and SENCO C. The 10 mm / 3/8" 7110 length falls within the published fastener range of the standard Omer 3G.
The current KYA packing specification lists 10,000 staples per box, approximately 179 staples per stick and 20 boxes per carton.
The listed range includes 4, 6, 8, 10, 12, 14 and 16 mm leg lengths. The featured 7110 product is the 10 mm version; specify another model when a different leg length is required.
Stainless steel is listed as a separate material option within the KYA 71 Series range. Specify the required material and leg length when requesting a quotation.
Provide the required staple model or leg length, material, quantity, destination market, application and stapler brand and model. This helps confirm the appropriate staple specification and packing configuration.
KYA supplies 7110 and 71 Series fine-wire upholstery staples for furniture manufacturers, upholstery workshops, distributors and professional fastening applications. For the featured 22 gauge 7110 galvanized staple with 9.0 mm crown and 10 mm leg, provide your required quantity, application and stapler model to confirm the appropriate supply configuration.
