Home / Fasteners / Nails / Anchor Nails / 34 Degree Galvanized Paper Tape Anchor Nails

34 Degree Galvanized Paper Tape Anchor Nails

Share to:
sharethis sharing button
Ideal solution for fastening joist shoes and pre-drilled panels, for timber connections in structural timber construction. Safe and efficient processing of the anchor nails is guaranteed at all times.
  • Collation type: Paper Tape
  • Collation degrees: 34°
  • Length: 37 - 75 mm | 1 7/16 - 3"
  • Diameter : 4 mm | 0.157"
  • 4 x 40mm

  • KYA

  • KYA-AN440

Head:
Finish:
Degree:
Material:
Availability:
Quantity:
Product Description

34 Degree Galvanized Paper Tape Anchor Nails

HEAD TYPE: anker head
COLLATION TYPE: Paper Tape
DIAMETER: 4 mm | 0.157"
LENGTH: 37 - 75 mm | 1 7/16 - 3"
STRIP CAPACITY: 22
COLLATION DEGREES: 34°
FINISH: electro-galvanized, hot dip galvanized
MATERIAL: Standard Steel, Stainless Steel 304, Stainless Steel 316
NAIL POINT: diamond point
SHANK: ring

anker nails-9

anker nails

anker nails

Nails Head

anchor nails

Ring Shank

concrete anchor nails

Nails Point


Shank Type

Smooth Shank

Smooth shank nails are the most common and are often used for framing and general construction applications. They offer enough holding power for most everyday use.


Ring Shank

Ring shank nails offer superior holding power over smooth shank nails because the wood fills in the crevasse of the rings and also provide friction to help prevent the nail from backing out over time. A ring shank nail is often used in softer types of wood where splitting is not an issue.


Application

FRAMING

SHEATHING

34 degree paper framing nails

Finishing

Bright Finish

Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.


Hot Dip Galvanized (HDG)

Hot dip galvanized fasteners are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow. Areas near the coasts where the salt content in rain water is much higher, should consider Stainless Steel fasteners as salt accelerates the deterioration of the galvanization and will accelerate corrosion. 


Electro Galvanized (EG)

Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener. 


Stainless Steel (SS)

Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel. 


Previous: 
Next: 
Apply Our Best Quotation

TOOLS

FASTENERS

FURNITURE ACCESSORIES

OFFICE SUPPLIES

PACKAGING MATERIAL

WIRE

QUICK LINKS

Canton-Fair  
The 135th Canton Fair
Date: Apr 15th-19th,2024
Booth number: 20.1 H26

Copyright ©  2024 Changzhou KYA Fasteners Co.,Ltd. All rights reserved.