| Finish: | |
|---|---|
| Quantity: | |
KYA 15 Gauge 34 Degree DA Finish Nails in the DA/50 2-inch / 50mm size are angled finish fasteners for furniture, cabinetry, molding, baseboards, trim, decorative woodwork and other finish-carpentry applications. The current product page identifies this size as KYA-DA50.
The DA50 uses a 15GA fastener format with a published 3.1mm head width, 1.76mm width, 1.76mm thickness, 50mm / 2-inch length, chisel point and 34-degree angled glue collation. The featured finish on this page is electro-galvanized steel.
KYA also lists stainless steel as another material / finish option within this product family. The current page does not state the stainless-steel grade, so buyers requiring stainless fasteners should confirm the exact material specification separately.
| Specification | Details |
|---|---|
| Product Type | 15 Gauge DA Angled Finish Nail |
| KYA Code | KYA-DA50 |
| Family Item | DA/50 |
| Model | 2 Inch / DA Brad Nails |
| Gauge | 15 GA |
| Collation Angle | 34 Degree |
| Primary Length | 50mm / 2" |
| Head Width | 3.1mm |
| Fastener Width | 1.76mm |
| Fastener Thickness | 1.76mm |
| Featured Material | Electro-Galvanized Steel |
| Featured Finish | Electro-Galvanized |
| Other Listed Material | Stainless Steel; exact grade is not stated on the current product page |
| Shank Options | Smooth or Ring according to the current DA family specification; confirm the required shank when ordering |
| Point Type | Chisel Point |
| Collation | Glue-Collated 34° Angled Strip |
| Nails per Stick | 100 pcs |
| Nails per Box | 4,000 pcs |
| Boxes per Carton | 4 boxes |
| Cartons per Pallet | 60 cartons for DA/50 according to the current KYA table |
| Primary Applications | Furniture, cabinetry, molding, baseboards, trim, decorative strips, floor strips and picture-frame assembly |
DA50 identifies the 50mm member of KYA's 15 gauge 34-degree DA angled finish-nail family. The same current KYA family includes DA/25, DA/32, DA/38, DA/45, DA/50, DA/57 and DA/64.
KYA lists DA/25 through DA/64 family sizes. Confirm the required item code and length when requesting a quotation.
| Item | Length | Pcs / Stick | Pcs / Box | Boxes / Carton | Cartons / Pallet |
|---|---|---|---|---|---|
| DA/25 | 25mm / 1" | 100 | 4,000 | 4 | 120 |
| DA/32 | 32mm / 1-1/4" | 100 | 4,000 | 4 | 120 |
| DA/38 | 38mm / 1-1/2" | 100 | 4,000 | 4 | 90 |
| DA/45 | 45mm / 1-3/4" | 100 | 4,000 | 4 | 80 |
| DA/50 | 50mm / 2" | 100 | 4,000 | 4 | 60 |
| DA/57 | 57mm / 2-1/4" | 100 | 4,000 | 4 | 60 |
| DA/64 | 64mm / 2-1/2" | 100 | 4,000 | 4 | 60 |
The 50mm / 2-inch DA50 sits near the middle of KYA's 25–64mm DA Series and is used for finish-carpentry applications such as molding, baseboard, cabinetry, furniture components and trim where a 15 gauge angled finish nail is appropriate.
Whether 50mm is the correct length depends on the thickness of the attached trim, the receiving substrate, required penetration and the fastener range specified by the nailer manufacturer.
The current KYA specification identifies this product as a 34-degree DA angled strip. The angled format is intended for 15 gauge DA-style finish-nailer magazines rather than straight 15GA or 16GA finish-nail systems.
Do not select a replacement nail from gauge and length alone. The nailer must also accept the correct DA-style angled strip, fastener cross-section, head geometry and collation format.
KYA specifies a chisel point for this DA finish-nail family. Chisel points are commonly used on finish fasteners intended for wood and related finish-carpentry materials.
Actual driving behavior and the risk of wood splitting depend on wood species, grain direction, distance from the edge, nail length, tool depth setting and workpiece geometry. No universal anti-splitting performance should be assumed.
| Shank Type | Current KYA Family Information | Ordering Note |
|---|---|---|
| Smooth Shank | Listed as a DA Series shank option | Confirm smooth shank when the project or nailer specification calls for it |
| Ring Shank | Also listed within the current product family | Confirm exact DA50 ring-shank availability and tool acceptance before ordering |
| Material / Finish | Verified Page Information | Selection Guidance |
|---|---|---|
| Electro-Galvanized Steel | Featured DA50 configuration on this page | Best positioned for interior and protected finish applications; the current page does not publish coating thickness or a specific corrosion-test rating |
| Stainless Steel | Listed as another product option | Confirm exact stainless grade and DA50 availability before selecting it for a corrosion-sensitive application |
The current DA50 page does not publish zinc thickness, salt-spray hours or the grade of the stainless-steel option. These values should not be added to technical specifications unless supported by the applicable production specification or test report.
The most reliable way to match a 15GA angled finish nail is to verify the complete fastener system: 15 gauge, 34-degree DA-style angle, 50mm length, fastener dimensions, head geometry and strip collation.
| Tool / Industry Reference | Published Information | DA50 Guidance |
|---|---|---|
| KYA NT65 | 15GA, 34° DA angled finish nails, 32–65mm | The 50mm DA50 falls inside the published KYA NT65 length and DA-family range. Confirm current strip dimensions and feed fit before production use. |
| SENCO 34° DA System | Current SENCO data includes a 2" 15GA 34° galvanized chisel-point DA fastener with 4,000 nails per box | Useful industry cross-reference. Do not assume KYA interchangeability solely because gauge, angle and length are similar. |
| Metabo HPT DA System | Current Metabo HPT data includes 2" 15GA 34° smooth-shank DA finish nails | Same general DA market class, but current referenced product uses stainless steel and its own tool specifications. Verify complete dimensions before substitution. |
| BOSTITCH DA-Style System | BOSTITCH currently maintains a dedicated 15 Gauge “DA” Style Angled Finish Nails product family | Treat DA naming as a useful family reference, not universal proof that every KYA DA strip fits every BOSTITCH DA tool. |
| Other 15GA Angled Nailers | Specifications vary by manufacturer and model | Check gauge, DA format, angle, head, shank section, strip geometry, collation and 50mm length acceptance. |
The current KYA page lists cabinetwork among the primary uses for 15GA DA finish nails. Select the 50mm length according to component thickness and the receiving wood structure.
DA50 finish nails can be used for suitable baseboard, molding and decorative trim installation when the nailer and workpiece specification call for a 2-inch 15GA angled finish nail.
Furniture production is listed as an application for the current DA family. Verify nail placement, component thickness and material before repetitive production fastening.
The current application list includes decorative strips and interior decoration. The angled DA magazine format can be useful where the specified nailer must work around trim profiles or confined finish-carpentry areas.
KYA also lists picture-frame assembly. Check the frame profile and nail length carefully because a 50mm nail may be excessive for thin frame sections.
Floor strips and cladding floor boards are included in the current KYA application list. Use the fastener only where the flooring or board installation method permits a 15GA angled finish nail.
| Feature | 15GA DA Finish Nail | 16GA Finish Nail |
|---|---|---|
| Gauge | 15 Gauge | 16 Gauge |
| Current KYA DA50 Format | 34° angled DA strip | Can use a different straight or angled fastener system depending on product |
| Tool | 15GA 34° DA-compatible angled finish nailer | 16GA finish nailer matched to its own magazine format |
| Interchangeable? | No. Gauge, dimensions and magazine geometry differ. | |
A 15GA DA finish nail is physically larger than an 18GA brad and is used in a different nailer system. The KYA DA50 should not be loaded into an 18GA brad nailer, and an 18GA brad should not be treated as a DA50 substitute.
For finish work, choose the fastener based on the tool, trim dimensions, substrate and fastening requirement rather than selecting only by the visual size of the nail hole.
| Selection Factor | What to Check |
|---|---|
| Attached Material Thickness | The fastener must pass through the trim or component and still provide suitable penetration into the receiving substrate. |
| Receiving Material | Wood species and density affect driving behavior and nail-length selection. |
| Nailer Range | Verify that the exact nailer accepts 50mm / 2-inch 15GA 34° DA nails. |
| Breakthrough Risk | A nail that is too long can protrude through thin components or appear on a visible surface. |
| Environment | Match the finish or material to the corrosion exposure rather than assuming electro-galvanized nails are suitable for every environment. |
| Ordering Information | Featured Specification |
|---|---|
| KYA Code | KYA-DA50 |
| Family Item | DA/50 |
| Gauge | 15GA |
| Angle | 34° DA Angled Strip |
| Length | 50mm / 2" |
| Finish | Electro-Galvanized for the featured product |
| Shank | Specify smooth or ring according to the required configuration |
| Nailer | Provide exact manufacturer and model when cross-brand compatibility must be checked |
| Application | Provide furniture, cabinetry, trim, molding, baseboard or other intended application |
| Quantity | Provide required boxes, cartons, pallets or purchasing volume |
DA50 is KYA's 50mm / 2-inch member of the 15 gauge 34-degree DA angled finish-nail family. The current product code is KYA-DA50.
The primary length is 50mm / 2 inches.
The current KYA DA50 specification is 15 gauge.
They are supplied as a 34-degree angled DA-style strip.
The current product page lists a 3.1mm head width, 1.76mm width, 1.76mm thickness and 50mm length.
The current KYA specification lists a chisel point.
Yes. The featured product on this URL is the electro-galvanized DA50 configuration.
Stainless steel is listed as another option on the current product page. The stainless grade is not stated on this DA50 page, so confirm the exact material specification when required.
The current KYA page recommends the electro-galvanized finish primarily for indoor use because its corrosion resistance is limited compared with more corrosion-resistant material options. Select the fastener material according to the actual exposure environment.
The current KYA DA family lists both smooth and ring shank configurations. Confirm the exact DA50 shank required when ordering rather than assuming both are stocked in every finish.
KYA currently lists 100 nails per stick.
The current packing table lists 4,000 nails per box.
The current DA50 packing table lists 4 boxes per carton.
The current KYA NT65 specification accepts 15GA 34-degree DA angled finish nails from 32mm to 65mm, so the 50mm DA50 is within its published gauge, angle and length range. Confirm the current fastener and tool specifications before production use.
SENCO currently uses 15GA 34-degree DA angled finish nails and publishes a 2-inch galvanized DA fastener in this market class. Cross-brand interchangeability should still be verified from actual strip, head and fastener dimensions before use.
No. DA50 uses a 34-degree angled strip. A straight finish nailer uses a different magazine geometry and should only be loaded with the fastener format specified by its manufacturer.
No. DA50 is a 15 gauge angled finish nail and requires a compatible 15GA DA-style finish nailer. An 18GA brad nailer uses a different fastener size and magazine system.
The current KYA page lists furniture making, cabinetwork, trim, baseboards, molding, floor strips, decorative strips, cladding floor boards and picture-frame assembly among the DA family's applications.
Provide the exact nailer manufacturer and model and compare gauge, 34-degree DA format, 50mm length, head dimensions, fastener cross-section and strip collation before replacing another brand's nail.
KYA supplies 15 gauge DA angled finish nails for fastener distributors, pneumatic-tool distributors, furniture manufacturers, cabinet factories, woodworking suppliers and professional finish-carpentry buyers.
For quotations on DA/50 15GA 34° electro-galvanized finish nails, provide the required shank type, exact nailer model, application, purchasing quantity and destination market.
