The Pneumatic 15 Gauge Angled Finish Nailer NT65 is designed for precision trim work, cabinet building, furniture frame assembly, staircases, exterior trim, door construction, window construction, molding installation, and light framing. It drives 15 gauge 34 degree DA angle finish nails from 1-1/4" to 2-1/2", giving professional users strong holding power, clean finish results, and better access in tight corners.
KYA Fasteners supplies 15 gauge pneumatic angled finish nailers and matching DA finish nails for carpenters, cabinet factories, furniture manufacturers, trim contractors, hardware distributors, construction tool wholesalers, and OEM tool buyers. The NT65 combines a lightweight aluminum body, 100-nail magazine capacity, tool-free depth adjustment, quick jam release, adjustable exhaust, and a non-marring rubber tip for professional finish carpentry applications.
15 gauge finish nailing power: Provides stronger holding power than thinner 18 gauge brad nailers for trim, cabinets, furniture, and finish carpentry.
34 degree angled magazine: Improves access in corners, staircases, door frames, window casing, and confined installation areas.
DA angle finish nail compatibility: Drives 15GA 34 degree DA angle finish nails from 1-1/4" to 2-1/2".
Lightweight aluminum body: 2.04 kg / 4.41 lbs tool weight supports easier handling during extended work.
100-nail magazine capacity: Reduces reload frequency for repetitive trim and cabinetry installation.
Tool-free depth adjustment: Allows flush or countersunk nail setting across different materials.
Tool-free jam-release mechanism: Helps remove jammed nails quickly and reduce downtime.
Non-marring rubber tip: Helps protect finished wood, painted trim, cabinet surfaces, and decorative panels.
Adjustable exhaust: Directs air away from the operator and work surface.
Selectable firing mode: Supports sequential or contact firing for different jobsite requirements.
| Model | NT65 |
|---|---|
| Product Name | Pneumatic 15 Gauge Angled Finish Nailer NT65 |
| Tool Type | Pneumatic Finish Nailer / 15 Gauge Angled Finish Nail Gun |
| Dimensions | 344 mm x 82 mm x 304 mm / 13-1/2" x 3-1/4" x 12" |
| Weight | 2.04 kg / 4.41 lbs |
| Body Material | Aluminum body with plastic magazine |
| Operating Pressure | 70-120 psi / 5-8.3 bar |
| Load Capacity | 100 nails |
| Compatible Nail Type | 15 Gauge 34 Degree DA Angle Finish Nails |
| Nail Length Range | 1-1/4" to 2-1/2" / 32 mm to 65 mm |
| Nail Head Diameter | 0.12" x 0.095" / 3.0 mm x 2.4 mm |
| Nail Shank Diameter | 0.072" / 1.8 mm |
| Nail Shank Type | Smooth, Ring, Screw |
| Magazine Angle | 34 Degree |
| Main Functions | Tool-free depth adjustment, tool-free jam release, adjustable exhaust, non-marring rubber tip, ergonomic grip, selectable trigger. |
| Main Applications | Light framing, furniture frame assembly, exterior trim, staircases, cabinet building, door construction, window construction, molding, and finish carpentry. |
The NT65 finish nailer is designed for 15 gauge 34 degree DA angle finish nails. To avoid feeding problems, nail jams, or poor fastening performance, buyers should confirm the gauge, magazine angle, nail length, shank type, and collation type before ordering.
| Fastener Specification | Compatible Range | Buyer Note |
|---|---|---|
| Gauge | 15 Gauge | Do not use 18 gauge brad nails or incompatible finish nails. |
| Angle | 34 Degree | Use 34 degree DA angle finish nails for correct magazine feeding. |
| Length | 1-1/4" to 2-1/2" / 32 mm to 65 mm | Choose length based on trim thickness, substrate material, and required holding power. |
| Shank Type | Smooth, Ring, Screw | Smooth shank is common for clean finish work; ring shank improves holding power. |
| Typical Materials | Bright steel, galvanized steel, stainless steel depending on nail option | Use stainless steel or corrosion-resistant nails for exterior trim or humid environments. |
The NT65 is built for finish carpentry applications where strong holding power, accurate nail placement, and clean surface protection are required. The 34 degree angled design helps users reach tight spaces more easily than straight finish nailers.
| Application | Why NT65 Works | Recommended Nail |
|---|---|---|
| Cabinet Building | Accurate depth control and 15 gauge holding power support strong cabinet frame assembly. | 1-1/2" to 2" 15GA DA finish nails. |
| Furniture Frame Assembly | Provides stronger fastening than thinner brad nails for furniture frames and decorative wood parts. | Smooth shank for clean finish; ring shank for stronger hold. |
| Exterior Trim | Non-marring tip protects the surface, while angled magazine improves access around trim profiles. | Galvanized or stainless steel 15 gauge finish nails. |
| Staircases | 34 degree magazine helps work around corners, trim boards, and stair components. | 2" to 2-1/2" 15GA DA finish nails. |
| Door and Window Construction | Good for casing, trim boards, frames, and finish installation around openings. | 1-1/4" to 2-1/2" nails according to material thickness. |
| Light Framing | 15 gauge nails provide stronger fastening than brad nails for selected light-duty framing tasks. | 2" to 2-1/2" finish nails where suitable. |
A 15 gauge finish nailer is used when stronger holding power is required for thicker trim, cabinets, stair parts, doors, and furniture frames. An 18 gauge brad nailer uses thinner brads and is better for delicate trim or lightweight decorative parts. The NT65 should be used with 15 gauge 34 degree DA finish nails, not 18 gauge brad nails.
| Tool Type | Fastener | Best Use |
|---|---|---|
| 15 Gauge Angled Finish Nailer | 15GA 34° DA angle finish nails | Cabinets, baseboards, staircases, exterior trim, doors, windows, furniture frames, and heavier finish work. |
| 18 Gauge Brad Nailer | 18GA brad nails | Light trim, small molding, decorative strips, and delicate finish work with smaller nail holes. |
Professional buyers should compare nail compatibility, magazine angle, nail length range, operating pressure, tool weight, depth adjustment, jam-release design, surface protection, and matching nail availability. The NT65 is suitable for users who need a pneumatic 15 gauge 34 degree finish nailer for production, installation, and jobsite finish carpentry.
| Selection Factor | Why It Matters | NT65 Advantage |
|---|---|---|
| Nail Compatibility | Wrong nail angle or gauge can cause jamming and poor feeding. | Accepts 15 gauge 34 degree DA angle finish nails. |
| Nail Length Range | Different trim and wood thicknesses require different nail lengths. | Drives 1-1/4" to 2-1/2" nails. |
| Depth Adjustment | Finish work requires accurate flush or countersunk nail setting. | Tool-free depth adjustment supports fast setup. |
| Surface Protection | Finished trim and cabinets can be damaged by hard tool contact. | Non-marring rubber tip helps protect surfaces. |
| Maintenance | Fast jam clearing reduces downtime during production and installation. | Tool-free jam-release mechanism supports quick maintenance. |
| Symptom | Possible Cause | Solution |
|---|---|---|
| Air leak in cylinder cap when tool is idle | Loose head valve piston seal or o-rings; worn or damaged cylinder cap gasket. | Check and replace the head valve piston set or cylinder cap gasket. |
| Air leak in trigger area when tool is idle | Damaged o-ring in trigger valve or stem; dirt in trigger valve. | Check and replace the o-ring; clean the trigger valve. |
| Air leak in cylinder cap when tool is working | Damaged head valve piston o-rings or damaged seal under cylinder cap. | Check and replace the o-rings or seal. |
| Air leak in nose when tool is working | Worn or damaged bumper; loose driver piston thread. | Check and replace the bumper or driver piston unit. |
| Air leak in trigger area when tool is working | Worn or damaged trigger valve head; damaged head valve piston o-rings. | Check and replace the trigger valve head or o-rings. |
| Driver fails to return completely | Misaligned driver or guide, worn nozzle, tight piston o-ring, or insufficient lubrication. | Straighten the driver, verify guide and magazine alignment, replace the nozzle, and lubricate or replace the o-ring. |
| Frequent nail jams | Wrong nail gauge, wrong angle, damaged nail strip, dirty magazine, or worn driver. | Use compatible 15 gauge 34 degree DA nails, clean the magazine, and inspect the driver and nose guide. |
| Nails are over-driven or under-driven | Incorrect air pressure or depth setting. | Adjust operating pressure and use the tool-free depth adjustment to set proper nail depth. |
KYA Fasteners supplies pneumatic finish nailers, brad nailers, framing nailers, coil nailers, finish nails, brad nails, staples, hog rings, and industrial fastening solutions for global B2B buyers. We support tool supply, matching fastener selection, spare parts support, export packing, and private label procurement for distributors and OEM customers.
Tool and nail supply: NT65 finish nailer and matching 15 gauge 34 degree DA finish nails are available.
Wholesale support: Suitable for hardware distributors, construction tool importers, woodworking suppliers, and furniture manufacturers.
Specification support: Help buyers match nail gauge, angle, length, shank type, and finish with the correct nailer.
Export packaging: Carton, pallet, labeling, and shipping support for international orders.
Custom procurement: Support for OEM orders, private labels, tool kits, spare parts, and matching fastener supply.
The NT65 is used for cabinet building, furniture frame assembly, exterior trim, staircases, door construction, window construction, light framing, molding, and finish carpentry.
The NT65 uses 15 gauge 34 degree DA angle finish nails from 1-1/4" to 2-1/2" / 32 mm to 65 mm.
No. The NT65 is designed for 15 gauge 34 degree DA angle finish nails. It should not be used with thinner 18 gauge brad nails.
The operating pressure range is 70-120 psi / 5-8.3 bar. Adjust the pressure according to nail length, wood hardness, and required drive depth.
A 34 degree angled finish nailer helps reach tight corners and confined areas, making it useful for staircases, cabinets, crown molding, door casing, window casing, and detailed trim work.
The non-marring rubber tip helps protect finished surfaces, painted trim, cabinet panels, and decorative wood from tool marks during nailing.
Use compatible 15 gauge 34 degree DA finish nails, keep the magazine clean, maintain proper lubrication, use clean regulated air, and replace worn driver, guide, or seal parts when needed.
Yes. KYA Fasteners can supply NT65 pneumatic angled finish nailers together with compatible 15 gauge 34 degree DA finish nails, spare parts, packaging support, and export service.
