KYA 3.5×35mm collated drywall screws are C1022A steel fasteners with a bugle head, supplied in plastic collated strips for use with compatible auto-feed screw guns. The collated format allows screws to be fed sequentially during repetitive drywall and interior installation work without loading each screw individually.
The 35mm screws are available with black or grey phosphated surfaces and yellow or blue-white zinc finishes. KYA lists 1,000 screws per box for the 3.5×35mm size.
For accurate tool and substrate matching, buyers should confirm the screw thread, point, drive recess and plastic strip dimensions required by the exact screw gun. Different drywall screw configurations are used for wood framing, light-gauge metal framing and other substrates.
| Product Type | Collated Drywall Screw |
| Model | 3.5 × 35mm |
| Nominal Diameter | 3.5mm |
| Nominal Length | 35mm / approximately 1-3/8" |
| Material | C1022A Steel |
| Head Type | Bugle Head |
| Collation | Plastic Collated Strip |
| Surface Options | Black Phosphated / Grey Phosphated / Yellow Zinc / Blue-White Zinc |
| Box Quantity | 1,000 pcs |
| Carton Quantity | 10,000 pcs |
| Pallet Quantity | 240,000 pcs |
| Screw Weight | Approximately 1.67g / pc |
| Box Size | 56 × 26 × 4cm |
| Carton Size | 57 × 27 × 21.5cm |
| Primary Application | Drywall and gypsum board installation with compatible auto-feed screw systems |
Collated drywall screws are arranged in a plastic carrier strip so a compatible auto-feed screwdriver can advance the next fastener after each installation. This format is suited to repetitive interior fastening where installers want to reduce manual screw handling.
The product has a nominal screw diameter of 3.5mm and a length of 35mm. The required screw length should be selected according to board thickness, framing material and the penetration required by the installation specification.
KYA specifies C1022A steel for this collated screw range. The final fastener configuration should be selected according to the intended substrate, required thread form, point style and surface treatment.
The bugle head profile is commonly used for drywall fastening because it is designed to seat into gypsum board while distributing pressure around the head area. Correct screw-gun depth adjustment is important for consistent installation.
The plastic carrier strip allows multiple screws to be loaded into a compatible auto-feed screw gun as a continuous strip. Screw spacing, carrier geometry and strip dimensions must match the feed mechanism of the selected tool.
KYA lists black phosphated, grey phosphated, yellow zinc and blue-white zinc finishes within this collated screw range. The appropriate surface should be selected according to the intended installation environment and project requirements.
The 3.5×35mm size is listed at 1,000 screws per box and 10,000 screws per carton, providing a commercial packaging format for contractors, distributors and installation businesses.
| Item | Specification |
|---|---|
| Product | Collated Screw 3.5×35mm |
| Box Size | 56 × 26 × 4cm |
| Carton Size | 57 × 27 × 21.5cm |
| Box Quantity | 1,000 pcs |
| Carton Quantity | 10,000 pcs |
| Pallet Quantity | 240,000 pcs |
| Screw Weight | Approximately 1.67g / pc |
The primary use of the 35mm collated screw is repetitive drywall and gypsum-board installation using an auto-feed screw system. The exact framing material that can be fastened depends on the screw thread and point configuration.
Drywall and gypsum board installation
Interior wall and ceiling installation
Repetitive fastening with compatible auto-feed screw guns
Drywall-to-wood framing when the selected screw uses the appropriate thread and point
Drywall-to-light-gauge metal framing when the selected screw configuration is specified for that substrate
Interior fit-out and partition installation
Do not treat a standard drywall screw as a generic structural framing, exterior decking or cement-board fastener. Those applications can require different thread forms, point types, head designs, corrosion protection and structural performance.
A 35mm screw length alone does not determine whether the fastener is intended for wood or metal framing. Professional drywall screw systems use different thread and point configurations for different substrates.
| Application | What to Confirm |
|---|---|
| Drywall to Wood | Thread form, sharp point, screw length and required penetration into the wood framing |
| Drywall to Light-Gauge Metal | Fine-thread or specified drywall screw geometry, point style and maximum metal thickness |
| Drywall to Heavier Metal | Self-drilling point and drilling capacity appropriate for the steel thickness |
| Cement Board | Fastener specifically permitted by the board manufacturer, including head, coating, point and thread |
When ordering KYA 3.5×35mm collated screws, provide the framing material and screw-gun model so the required screw configuration can be checked before supply.
KYA currently references screw systems from Makita, Hilti, SENCO, Festool, Hitachi, Ridgid and Bosch. These brand references should not be interpreted to mean that every auto-feed tool from each manufacturer accepts the same screw strip.
Compatibility depends on screw length, diameter, drive recess, plastic-strip dimensions, screw spacing, feed mechanism and nosepiece configuration. Buyers should provide the exact screw-gun or auto-feed attachment model when requesting cross-brand compatibility.
| Compatibility Parameter | What to Verify |
|---|---|
| Screw Length | Tool or magazine must accept 35mm screws |
| Screw Diameter | Fastener and feed system must accept the 3.5mm screw format |
| Drive Recess | Driver bit must match the exact screw recess |
| Plastic Strip | Carrier strip width, pitch and screw spacing must match the feed system |
| Nosepiece | Nosepiece and depth-control system must accommodate the screw length and bugle head |
| Thread and Point | Screw geometry must suit the wood or metal framing material being fastened |
For example, Hilti offers 3.5×35mm collated drywall screws specifically matched to its SD-M magazine systems, while SENCO provides different collated screws for drywall-to-wood and drywall-to-metal applications. The same selection principle should be applied when matching KYA screws to another auto-feed system.
Phosphated drywall screws are commonly selected for dry interior construction. The phosphate surface should not be treated as a substitute for a corrosion-resistant exterior fastener where prolonged moisture exposure is expected.
KYA also lists zinc-coated versions within the collated screw range. The required finish should be specified according to the intended environment and project requirements.
Finish alone does not determine whether a screw is suitable for structural, exterior or cement-board applications. The complete fastener specification must be considered.
KYA lists multiple 3.5mm collated screw lengths within the same product family. Packaging quantities vary for the longer sizes.
| Size | Box Size | Carton Size | Box Qty. | Carton Qty. | Pallet Qty. | Weight g/pc |
|---|---|---|---|---|---|---|
| 3.5×25 | 56×26×3cm | 57×27×16.5cm | 1,000 | 10,000 | 240,000 | 1.27 |
| 3.5×30 | 56×26×4cm | 57×27×21.5cm | 1,000 | 10,000 | 240,000 | 1.55 |
| 3.5×32 | 56×26×4cm | 57×27×21.5cm | 1,000 | 10,000 | 240,000 | 1.60 |
| 3.5×35 | 56×26×4cm | 57×27×21.5cm | 1,000 | 10,000 | 240,000 | 1.67 |
| 3.5×38 | 56×26×5cm | 57×27×26.5cm | 1,000 | 10,000 | 240,000 | 1.86 |
| 3.5×42 | 56×26×5cm | 57×27×26.5cm | 1,000 | 10,000 | 240,000 | 1.99 |
| 3.5×45 | 56×26×5cm | 57×27×26.5cm | 1,000 | 10,000 | 240,000 | 2.10 |
| 3.5×50 | 56×26×6cm | 57×27×31.5cm | 1,000 | 10,000 | 240,000 | 2.42 |
| 3.5×55 | 56×26×6cm | 57×27×31.5cm | 1,000 | 10,000 | 240,000 | 2.50 |
| 3.5×60 | 56×26×8cm | 57×27×25.5cm | 1,000 | 6,000 | 108,000 | 2.89 |
| 3.5×75 | 56×26×8cm | 57×27×25.5cm | 1,000 | 6,000 | 108,000 | 3.30 |
Packaging and available screw configurations should be confirmed for the required surface treatment, thread, point and strip format when ordering.
For accurate product matching and quotation, provide the required quantity, auto-feed screw gun manufacturer and model, framing material, screw surface treatment and delivery destination.
If the screws will be used with an existing auto-feed system, provide the current screw or strip specification so the 35mm length, drive recess, thread, point and carrier-strip geometry can be checked before supply.
| Product | 35mm Collated Drywall Screws |
| Size | 3.5 × 35mm |
| Material | C1022A Steel |
| Head | Bugle Head |
| Surface Options | Black / Grey Phosphated, Yellow / Blue-White Zinc |
| Box Quantity | 1,000 pcs |
| Inquiry Information | Quantity, screw gun model, framing material, required surface and delivery destination |
The product shown on this page has a nominal diameter of 3.5mm and a nominal length of 35mm, approximately 1-3/8" long.
KYA specifies C1022A steel for the 35mm collated drywall screw range.
The screws use a bugle head, a common head profile for drywall and gypsum-board fastening.
KYA lists 1,000 screws per box for the 3.5×35mm size.
The KYA range lists black phosphated, grey phosphated, yellow zinc and blue-white zinc surface options. Confirm the required finish when ordering.
Not automatically. Wood and metal framing can require different thread and point configurations. Specify the framing material so the correct screw version can be selected.
Standard drywall screws should not be treated as generic decking fasteners. Exterior decking typically requires fasteners selected for the deck material, structural requirements and environmental corrosion exposure.
Use them for cement board only when the board manufacturer permits the exact screw head, thread, point and surface treatment. Many cement-board systems specify dedicated cement-board screws.
Compatibility depends on the exact Makita tool or auto-feed attachment and the plastic-strip dimensions. Confirm the model number before ordering.
Some Hilti auto-feed systems use 3.5×35mm collated drywall screws, but compatibility must be checked against the exact Hilti magazine, screw strip, drive and screw configuration.
SENCO offers auto-feed systems that use collated drywall screws, but individual tools accept defined screw lengths, thread types and strip formats. Provide the exact SENCO model before purchasing replacement screws.
Check screw length, diameter, drive recess, head type, thread, point, plastic-strip width, screw spacing and the screw gun or magazine model.
Provide the required quantity, auto-feed screw gun manufacturer and model, framing material, preferred surface treatment and delivery destination. Reference 3.5×35mm collated drywall screws when requesting this size.
1308 container 1309 text
KYA 3.5×35mm collated drywall screws are C1022A steel fasteners with a bugle head, supplied in plastic collated strips for use with compatible auto-feed screw guns. The collated format allows screws to be fed sequentially during repetitive drywall and interior installation work without loading each screw individually.
The 35mm screws are available with black or grey phosphated surfaces and yellow or blue-white zinc finishes. KYA lists 1,000 screws per box for the 3.5×35mm size.
For accurate tool and substrate matching, buyers should confirm the screw thread, point, drive recess and plastic strip dimensions required by the exact screw gun. Different drywall screw configurations are used for wood framing, light-gauge metal framing and other substrates.
| Product Type | Collated Drywall Screw |
| Model | 3.5 × 35mm |
| Nominal Diameter | 3.5mm |
| Nominal Length | 35mm / approximately 1-3/8" |
| Material | C1022A Steel |
| Head Type | Bugle Head |
| Collation | Plastic Collated Strip |
| Surface Options | Black Phosphated / Grey Phosphated / Yellow Zinc / Blue-White Zinc |
| Box Quantity | 1,000 pcs |
| Carton Quantity | 10,000 pcs |
| Pallet Quantity | 240,000 pcs |
| Screw Weight | Approximately 1.67g / pc |
| Box Size | 56 × 26 × 4cm |
| Carton Size | 57 × 27 × 21.5cm |
| Primary Application | Drywall and gypsum board installation with compatible auto-feed screw systems |
Collated drywall screws are arranged in a plastic carrier strip so a compatible auto-feed screwdriver can advance the next fastener after each installation. This format is suited to repetitive interior fastening where installers want to reduce manual screw handling.
The product has a nominal screw diameter of 3.5mm and a length of 35mm. The required screw length should be selected according to board thickness, framing material and the penetration required by the installation specification.
KYA specifies C1022A steel for this collated screw range. The final fastener configuration should be selected according to the intended substrate, required thread form, point style and surface treatment.
The bugle head profile is commonly used for drywall fastening because it is designed to seat into gypsum board while distributing pressure around the head area. Correct screw-gun depth adjustment is important for consistent installation.
The plastic carrier strip allows multiple screws to be loaded into a compatible auto-feed screw gun as a continuous strip. Screw spacing, carrier geometry and strip dimensions must match the feed mechanism of the selected tool.
KYA lists black phosphated, grey phosphated, yellow zinc and blue-white zinc finishes within this collated screw range. The appropriate surface should be selected according to the intended installation environment and project requirements.
The 3.5×35mm size is listed at 1,000 screws per box and 10,000 screws per carton, providing a commercial packaging format for contractors, distributors and installation businesses.
| Item | Specification |
|---|---|
| Product | Collated Screw 3.5×35mm |
| Box Size | 56 × 26 × 4cm |
| Carton Size | 57 × 27 × 21.5cm |
| Box Quantity | 1,000 pcs |
| Carton Quantity | 10,000 pcs |
| Pallet Quantity | 240,000 pcs |
| Screw Weight | Approximately 1.67g / pc |
The primary use of the 35mm collated screw is repetitive drywall and gypsum-board installation using an auto-feed screw system. The exact framing material that can be fastened depends on the screw thread and point configuration.
Drywall and gypsum board installation
Interior wall and ceiling installation
Repetitive fastening with compatible auto-feed screw guns
Drywall-to-wood framing when the selected screw uses the appropriate thread and point
Drywall-to-light-gauge metal framing when the selected screw configuration is specified for that substrate
Interior fit-out and partition installation
Do not treat a standard drywall screw as a generic structural framing, exterior decking or cement-board fastener. Those applications can require different thread forms, point types, head designs, corrosion protection and structural performance.
A 35mm screw length alone does not determine whether the fastener is intended for wood or metal framing. Professional drywall screw systems use different thread and point configurations for different substrates.
| Application | What to Confirm |
|---|---|
| Drywall to Wood | Thread form, sharp point, screw length and required penetration into the wood framing |
| Drywall to Light-Gauge Metal | Fine-thread or specified drywall screw geometry, point style and maximum metal thickness |
| Drywall to Heavier Metal | Self-drilling point and drilling capacity appropriate for the steel thickness |
| Cement Board | Fastener specifically permitted by the board manufacturer, including head, coating, point and thread |
When ordering KYA 3.5×35mm collated screws, provide the framing material and screw-gun model so the required screw configuration can be checked before supply.
KYA currently references screw systems from Makita, Hilti, SENCO, Festool, Hitachi, Ridgid and Bosch. These brand references should not be interpreted to mean that every auto-feed tool from each manufacturer accepts the same screw strip.
Compatibility depends on screw length, diameter, drive recess, plastic-strip dimensions, screw spacing, feed mechanism and nosepiece configuration. Buyers should provide the exact screw-gun or auto-feed attachment model when requesting cross-brand compatibility.
| Compatibility Parameter | What to Verify |
|---|---|
| Screw Length | Tool or magazine must accept 35mm screws |
| Screw Diameter | Fastener and feed system must accept the 3.5mm screw format |
| Drive Recess | Driver bit must match the exact screw recess |
| Plastic Strip | Carrier strip width, pitch and screw spacing must match the feed system |
| Nosepiece | Nosepiece and depth-control system must accommodate the screw length and bugle head |
| Thread and Point | Screw geometry must suit the wood or metal framing material being fastened |
For example, Hilti offers 3.5×35mm collated drywall screws specifically matched to its SD-M magazine systems, while SENCO provides different collated screws for drywall-to-wood and drywall-to-metal applications. The same selection principle should be applied when matching KYA screws to another auto-feed system.
Phosphated drywall screws are commonly selected for dry interior construction. The phosphate surface should not be treated as a substitute for a corrosion-resistant exterior fastener where prolonged moisture exposure is expected.
KYA also lists zinc-coated versions within the collated screw range. The required finish should be specified according to the intended environment and project requirements.
Finish alone does not determine whether a screw is suitable for structural, exterior or cement-board applications. The complete fastener specification must be considered.
KYA lists multiple 3.5mm collated screw lengths within the same product family. Packaging quantities vary for the longer sizes.
| Size | Box Size | Carton Size | Box Qty. | Carton Qty. | Pallet Qty. | Weight g/pc |
|---|---|---|---|---|---|---|
| 3.5×25 | 56×26×3cm | 57×27×16.5cm | 1,000 | 10,000 | 240,000 | 1.27 |
| 3.5×30 | 56×26×4cm | 57×27×21.5cm | 1,000 | 10,000 | 240,000 | 1.55 |
| 3.5×32 | 56×26×4cm | 57×27×21.5cm | 1,000 | 10,000 | 240,000 | 1.60 |
| 3.5×35 | 56×26×4cm | 57×27×21.5cm | 1,000 | 10,000 | 240,000 | 1.67 |
| 3.5×38 | 56×26×5cm | 57×27×26.5cm | 1,000 | 10,000 | 240,000 | 1.86 |
| 3.5×42 | 56×26×5cm | 57×27×26.5cm | 1,000 | 10,000 | 240,000 | 1.99 |
| 3.5×45 | 56×26×5cm | 57×27×26.5cm | 1,000 | 10,000 | 240,000 | 2.10 |
| 3.5×50 | 56×26×6cm | 57×27×31.5cm | 1,000 | 10,000 | 240,000 | 2.42 |
| 3.5×55 | 56×26×6cm | 57×27×31.5cm | 1,000 | 10,000 | 240,000 | 2.50 |
| 3.5×60 | 56×26×8cm | 57×27×25.5cm | 1,000 | 6,000 | 108,000 | 2.89 |
| 3.5×75 | 56×26×8cm | 57×27×25.5cm | 1,000 | 6,000 | 108,000 | 3.30 |
Packaging and available screw configurations should be confirmed for the required surface treatment, thread, point and strip format when ordering.
For accurate product matching and quotation, provide the required quantity, auto-feed screw gun manufacturer and model, framing material, screw surface treatment and delivery destination.
If the screws will be used with an existing auto-feed system, provide the current screw or strip specification so the 35mm length, drive recess, thread, point and carrier-strip geometry can be checked before supply.
| Product | 35mm Collated Drywall Screws |
| Size | 3.5 × 35mm |
| Material | C1022A Steel |
| Head | Bugle Head |
| Surface Options | Black / Grey Phosphated, Yellow / Blue-White Zinc |
| Box Quantity | 1,000 pcs |
| Inquiry Information | Quantity, screw gun model, framing material, required surface and delivery destination |
The product shown on this page has a nominal diameter of 3.5mm and a nominal length of 35mm, approximately 1-3/8" long.
KYA specifies C1022A steel for the 35mm collated drywall screw range.
The screws use a bugle head, a common head profile for drywall and gypsum-board fastening.
KYA lists 1,000 screws per box for the 3.5×35mm size.
The KYA range lists black phosphated, grey phosphated, yellow zinc and blue-white zinc surface options. Confirm the required finish when ordering.
Not automatically. Wood and metal framing can require different thread and point configurations. Specify the framing material so the correct screw version can be selected.
Standard drywall screws should not be treated as generic decking fasteners. Exterior decking typically requires fasteners selected for the deck material, structural requirements and environmental corrosion exposure.
Use them for cement board only when the board manufacturer permits the exact screw head, thread, point and surface treatment. Many cement-board systems specify dedicated cement-board screws.
Compatibility depends on the exact Makita tool or auto-feed attachment and the plastic-strip dimensions. Confirm the model number before ordering.
Some Hilti auto-feed systems use 3.5×35mm collated drywall screws, but compatibility must be checked against the exact Hilti magazine, screw strip, drive and screw configuration.
SENCO offers auto-feed systems that use collated drywall screws, but individual tools accept defined screw lengths, thread types and strip formats. Provide the exact SENCO model before purchasing replacement screws.
Check screw length, diameter, drive recess, head type, thread, point, plastic-strip width, screw spacing and the screw gun or magazine model.
Provide the required quantity, auto-feed screw gun manufacturer and model, framing material, preferred surface treatment and delivery destination. Reference 3.5×35mm collated drywall screws when requesting this size.
KYA lists worldwide shipment from Qingdao within 20–30 days and accepts requests for custom screw lengths and coatings. Confirm the current dispatch schedule and available coating options with KYA when placing an order.
