Home / Fasteners / Mattress Clips / Bed Sheet Clinch Clip M46 CL-16

Bed Sheet Clinch Clip M46 CL-16

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button
DESIGNED to attach paper wrapped wire to your sofa chair or other furniture seat springs to create one uniform platform and improve durability over time. EASY INSTALLATION: Take the wire and place it on the spring location you want to fasten together. Place the clip over the wire and spring and use pliers or clip tools to pinch the clip closed bending the two ends down. High quality strip polycord collated metal clips for industry.
  • M46-CL16

  • KYA

  • KYA-CL16

Availability:
Quantity:

CL-16 / M46 Clinch Clip Video

CL-16 M46 Bonnell Spring Clinch Clips

KYA CL-16 M46 clinch clips are galvanized steel strip clips designed for connecting compatible spring wire, stay wire, border wire and frame wire in mattress, sofa and upholstered furniture production. The clip measures approximately 11 mm wide, 6.2 mm inside width, 14.5 mm high and 0.8 mm thick.

CL-16 is commonly used in Bonnell spring mattress units, sofa spring assemblies, stay-wire connections and other wire-to-wire or wire-to-spring joints. The strip-fed format is intended for compatible M46-style pneumatic clinching tools and production equipment.

CL-16 M46 galvanized Bonnell spring clinch clips

Key Features of CL-16 M46 Clips

  • M46 clip platform: strip-fed clinching fastener for compatible spring and wire assemblies.

  • 11 mm clip width: compact profile for mattress, furniture and wire-product applications.

  • 6.2 mm inside width: provides space for compatible wire combinations before clinching.

  • 14.5 mm clip height: CL-16-specific open profile for matching clinching dies.

  • 0.8 mm galvanized steel: formed steel construction with zinc corrosion protection for indoor production and service.

  • Strip-fed collation: intended for compatible pneumatic clinching tools rather than roll-fed clip systems.

  • 6,000 clips per carton: current packing listed for this KYA product page.

  • Multiple applications: Bonnell spring units, stay wire, sofa springs, furniture frames and compatible wire assemblies.

Request CL-16 Pricing

CL-16 Technical Specifications

Parameter Specification
Model CL-16
Series M46
Fastener Type Strip-Fed Clinching Clip
Clip Width Approximately 11 mm
Inside Width Approximately 6.2 mm
Height Approximately 14.5 mm
Material Thickness Approximately 0.8 mm
Material Steel
Surface Galvanized
Feed Format Collated Strip
Packing 6,000 pcs / carton
Typical Applications Bonnell mattress springs, stay wire, sofa springs and compatible wire assemblies

Understanding the CL-16 Clip Dimensions

Clinching clips should be selected by their full geometry rather than the model name alone. Width, inside opening, height and material thickness all affect how the clip fits around the wire combination and how it closes in the clinching tool.

Dimension CL-16 Why It Matters
Clip Width 11 mm Must match the magazine, blade, anvil and available space around the joint.
Inside Width 6.2 mm Determines how much room is available for the wires before the clip is closed.
Height 14.5 mm Influences the open clip profile and final clinched shape.
Thickness 0.8 mm Affects forming behavior during clinching and the finished connection.

Galvanized Steel Construction

The featured CL-16 configuration is manufactured from galvanized steel with an approximately 0.8 mm material thickness. The galvanized surface provides corrosion protection during storage, mattress manufacturing, furniture production and normal indoor use.

Joint performance depends on more than material thickness. Wire diameter, clip geometry, blade and anvil condition, air pressure and final closure shape all affect the clinched connection.

Strip-Fed Collated Clips

CL-16 clips are supplied in a strip-collated format for compatible clinching tools. The strip is loaded into the magazine and advanced toward the blade and anvil as each clip is applied.

Strip-fed CL-16 clips are different from continuous roll clips such as CCP-series mattress clips. The two formats require different feed systems and should not be treated as interchangeable simply because they are both used in mattress production.

CL-16 M46 strip clinch clips for Bonnell mattress spring assembly

CL-16 for Bonnell Spring Mattress Assembly

Bonnell spring mattresses use interconnected coil springs and supporting wire components to form the spring unit. CL-16 clinching clips can be used at compatible wire connection points where the clip dimensions and closing geometry match the mattress design.

The correct clip should be selected according to spring-wire diameter, stay-wire or border-wire diameter, joint configuration and the clinching tooling used by the mattress manufacturer.

CL-16 M46 clinching clips for Bonnell spring mattress production

Stay Wire to Spring Fastening

Stay wire can be used to connect or stabilize spring elements in mattress and upholstered furniture assemblies. A CL-16 clip is positioned around the selected wire combination and mechanically closed by the clinching tool.

The 6.2 mm inside opening should provide sufficient space for the intended wires before closure. If the wire combination is too large or too small for the clip, a different M46 clip size may be required.

Sofa Seat and Furniture Spring Applications

M46 clinching clips are also used in sofa seats, sofa backs and upholstered furniture where spring wire, paper-wrapped wire, stay wire or other support wires need to be mechanically connected.

Furniture designs vary considerably, so CL-16 should be selected according to the actual wire sizes and joint geometry rather than assuming one M46 clip is suitable for every sofa spring assembly.

Border Wire and Mattress Frame Applications

Clinching clips are used in compatible mattress constructions to connect border wire, spring wire and other frame-wire components. The border wire helps define and support the perimeter of the spring unit.

CL-16 should only be used where its open dimensions and finished clinch geometry match the selected wire combination and production tooling.

mattress border wire clinching clip application

Paper-Wrapped Wire Applications

M46-style clips are used to attach paper-wrapped or other support wire to compatible sofa, chair and furniture springs. The clinched connection helps retain the support wire at the selected spring position.

Wire covering, wire diameter and total joint thickness should be considered when selecting the clip size.

Automotive Seat and Wire-Frame Applications

M46-family clinching clips can also be used in compatible automotive-seat and formed-wire assemblies. These applications may include spring wire, support wire or frame-wire connections.

Automotive production normally follows component-specific drawings and approved manufacturing procedures. Confirm the exact clip dimensions and finished clinch geometry before using CL-16 in an automotive application.

KYA M46 Clinching Tool Reference

KYA offers an M46 pneumatic clinching-tool platform for compatible 11 mm M46 clip sizes. CL-16 falls within the M46 clip family used for mattress, furniture, upholstery and wire-assembly applications.

Before production use, confirm that the actual tool configuration, magazine, blade and anvil are set up for the CL-16 dimensions and the intended wire combination.

Manual Pliers vs. Pneumatic Clinching Tools

Method Typical Use Selection Consideration
Manual Pliers / Clip Tools Repair, prototypes and lower-volume assembly where the clip can be positioned and closed correctly. The jaws must fit the clip profile and produce the required closed geometry.
Pneumatic Clincher Repeated production fastening in mattress, furniture and wire assemblies. Magazine, blade, anvil and air setup must match CL-16.

Why Tool Configuration Matters

Clinching tools do not use one universal clip geometry. Different clip sizes can require different magazines, blades, anvils and guides.

The tool must position the open clip correctly over the wire connection and form it to the intended closed profile. A clip that feeds through the magazine but does not match the anvil or blade can produce an incomplete or distorted joint.

How a CL-16 Clinching Clip Works

The open CL-16 clip is positioned around the wires or spring components that need to be joined. A compatible clinching tool then pushes the clip against the anvil, bending the clip ends around the connection.

After clinching, inspect the joint to confirm that the clip is fully formed, centered on the wires and holding the components without excessive deformation.

CL-16 vs. CCP-32 Roll Clips

Characteristic CL-16 CCP-32
Family M46 M46-Type
Width 11 mm 11 mm
Inside Width 6.2 mm 5.6 mm
Height 14.5 mm 14.3 mm
Thickness 0.8 mm 0.8 mm
Feed Format Strip Continuous Roll
Interchangeable No No

Although CL-16 and CCP-32 belong to a related mattress-clip size family, the inside opening and feed formats are different. Select the clip according to the machine and wire connection rather than substituting one for the other.

CL-16 and Other M46 Clip Sizes

Model Width Inside Width Height Thickness
CL-13 11 mm 6.2 mm 12 mm 0.8 mm
CL-14 11 mm 6.2 mm 13.5 mm 0.8 mm
CL-16 11 mm 6.2 mm 14.5 mm 0.8 mm
CL-18 11 mm 6.2 mm 15 mm 0.8 mm

The main difference between these M46 strip clips is the open height. The correct size depends on the total wire combination and the clinching-tool configuration.

How to Choose the Correct M46 Clip Size

Start with the diameters of the two wires or components being joined. The open clip must fit over the wire combination before clinching, while the selected anvil must close the clip to a secure finished shape.

If the clip is too small, it may not position correctly around the wires. If it is too large, the finished connection may not close as intended. Compare the existing clip or provide wire dimensions when changing clip sizes.

What to Confirm Before Ordering CL-16

Order Information What to Provide
Current Clip Provide CL-16, existing supplier model, drawing or physical sample.
Tool Model Provide the exact pneumatic clinching tool or machine model.
Feed Format Confirm that the equipment uses strip-fed clips.
Clip Width Approximately 11 mm.
Inside Width Approximately 6.2 mm.
Height Approximately 14.5 mm.
Thickness Approximately 0.8 mm.
Wire Combination Provide spring wire, stay wire, border wire or frame-wire diameters.
Application Specify Bonnell mattress, sofa spring, furniture, automotive seat or other wire assembly.
Packing Confirm current carton quantity when placing the order.

Discuss Your CL-16 Application

Frequently Asked Questions

What is a CL-16 M46 clinch clip?

CL-16 is a galvanized steel strip-fed clinching clip in the M46 family for compatible mattress, sofa, furniture and wire-assembly applications.

What are the CL-16 dimensions?

The current specification is approximately 11 mm wide, 6.2 mm inside width, 14.5 mm high and 0.8 mm thick.

Is CL-16 used for Bonnell spring mattresses?

Yes. Bonnell spring mattress production is a primary application when the spring-wire and supporting-wire dimensions match the CL-16 profile and tool setup.

Can CL-16 connect stay wire to mattress springs?

Yes. Stay-wire to spring-wire connections are established applications for M46-style clinching clips.

Can CL-16 be used for sofa springs?

Yes. CL-16 can be used in compatible sofa seat, sofa back and furniture spring assemblies where its dimensions match the wire combination.

Can CL-16 be used with paper-wrapped wire?

Yes, M46-style clips are used in furniture production to attach compatible paper-wrapped or support wire to springs. Confirm the combined wire size before selection.

Can CL-16 be used for automotive seats?

M46-family clips are used in compatible automotive seat and wire-frame assemblies. Automotive applications should be checked against the required component drawing and tooling.

Is CL-16 a strip clip or roll clip?

CL-16 is a strip-fed clinching clip. Roll-fed CCP-series clips use a different feed configuration.

Will CL-16 fit every M46 clinching tool?

Not automatically. The magazine, blade, anvil and guide configuration must match the CL-16 dimensions and the intended wire connection.

Will CL-16 fit every manual or pneumatic clincher?

No. Clinching tools use different clip widths, openings, magazine formats, blades and anvils. Confirm the exact tool model before ordering.

Is CL-16 the same as Vertex 88A22?

Do not assume direct interchangeability from the model reference alone. Compare the actual clip dimensions, strip format and tool configuration before replacing a Vertex or another manufacturer's fastener.

What is the difference between CL-16 and CL-14?

Both use an approximately 11 mm width, 6.2 mm inside width and 0.8 mm material thickness. CL-14 is approximately 13.5 mm high, while CL-16 is approximately 14.5 mm high.

What is the difference between CL-16 and CL-18?

CL-18 is slightly taller at approximately 15 mm, while CL-16 is approximately 14.5 mm high. Select the size according to the wire combination and clinching-tool setup.

What is the difference between CL-16 and CCP-32?

CL-16 is a strip-fed clip with approximately 6.2 mm inside width and 14.5 mm height. CCP-32 is a roll-fed clip with approximately 5.6 mm inside width and 14.3 mm height. Their feeding systems are different.

How many CL-16 clips are packed per carton?

The current KYA product page lists 6,000 clips per carton. Buyers purchasing in volume should confirm the current packing configuration with the quotation.

Can CL-16 guarantee an unbreakable joint?

No single clip can guarantee joint performance under every condition. Wire dimensions, tool setup, clip material and finished closure all influence the connection.

Should CL-16 be tested before changing suppliers?

Yes. Check strip feeding, clip positioning, closure shape and joint retention on the actual wire assembly before full production use.

What information should I provide for a quotation?

Provide the required quantity, clinching-tool brand and model, current clip reference, spring or wire diameters, intended application, packing requirement and destination market.

Ask About CL-16 M46 Clips

Order CL-16 M46 Clinching Clips

KYA supplies CL-16 M46 galvanized clinching clips for mattress manufacturers, Bonnell spring factories, sofa and furniture manufacturers, automotive-seat producers, wire-product factories and industrial fastener distributors. Send your current clip reference, tool model, wire dimensions, application and required quantity to confirm the appropriate configuration.

Contact KYA Fasteners

Previous: 
Next: 
Apply Our Best Quotation

TOOLS

FASTENERS

FURNITURE ACCESSORIES

OFFICE SUPPLIES

PACKAGING MATERIAL

WIRE

QUICK LINKS

Copyright ©  2026 Changzhou KYA Fasteners Co.,Ltd. All rights reserved.