KYA 3.4 × 70mm ring shank common nails are loose steel nails designed for wood fastening applications that require stronger resistance to nail withdrawal than conventional smooth shank designs. The 70mm length, 3.4mm shank diameter, wide flat head and diamond point make this size suitable for pallet manufacturing, wooden crates, framing, carpentry and other general construction applications where the specified nail size and finish are appropriate.
This product is supplied as loose common nails rather than collated nails. Model 3.4 × 70R is available with galvanized surface treatment, while other surface treatment options can be discussed according to purchasing requirements.
| Product Type | Loose Common Nail |
| Model | 3.4 × 70R |
| Product Code | KYA-3470R |
| Length | 70mm (approximately 2-3/4") |
| Shank Diameter | 3.4mm (approximately 0.134") |
| Shank Type | Ring Shank |
| Head | Wide Flat Head |
| Point | Diamond Point |
| Material | Steel |
| Finish | Galvanized |
| Packaging | 25 kg / carton |
| Standards Listed for This Product | ASTM F1667/F1667M is the listed nail specification; ASTM A153/A153M applies only to the applicable hot-dip galvanized coating. Confirm the required edition, coating class, product scope and supporting documents for the ordered configuration. |
The ringed profile along the shank creates additional mechanical engagement with wood fibers after the nail is driven. This makes ring shank nails useful in applications where resistance to withdrawal and loosening is important.
The wide head provides a larger bearing area against the workpiece, while the diamond point is designed for efficient penetration into suitable timber and wood products.
The annular rings along the shank grip the surrounding wood fibers and help resist pull-out. This makes ring shank nails useful for permanent wood assemblies and applications subject to movement or vibration.
The broad nail head increases the contact area against the wood surface and helps hold the fastened material securely in place.
The diamond-shaped point provides a conventional penetrating profile for driving the nail into timber and general wood products.
The galvanized surface provides corrosion protection compared with uncoated bright steel. The required coating or finish should be selected according to the intended environment, timber type and applicable project requirements.
The combination of a 70mm length and ringed shank makes this loose nail suitable for a range of professional wood-fastening operations where the specified dimensions meet the project requirements.
Wood pallet manufacturing and repair
Wooden crates and industrial packaging
General timber framing
Wooden panels and sheathing applications
Carpentry and woodworking
General construction wood fastening
Other timber assemblies requiring ring shank loose nails
KYA supplies common nails in multiple dimensions. The following table provides a reference for several sizes in the common nail range. For purchasing, specify the required length, shank diameter, shank type, surface treatment and packaging.
| Item | Penny Size | Length | Shank Diameter | Material |
|---|---|---|---|---|
| KYAS-06 | 7d | 2-1/4" (57mm) | 0.113" | Steel |
| KYAS-07 | 8d | 2-1/2" (63mm) | 0.131" | Steel |
| KYA-3470R | 9d | 2-3/4" (70mm) | 3.4mm (0.134") | Steel |
| KYAS-09 | 10d | 3" (75mm) | 0.148" | Steel |
Ring shank nails use annular grooves around the nail body to increase mechanical engagement with wood. They are commonly selected where greater resistance to nail withdrawal is required.
Smooth shank common nails provide straightforward driving characteristics and are widely used for general wood construction and carpentry applications.
Galvanizing adds a zinc-based protective layer to the steel surface. Buyers should specify the required finish according to the intended service environment and applicable project requirements.
KYA's common nail product range also lists bright, polished and vinyl-coated surface treatment options. Contact KYA with the required nail dimensions, surface treatment and order quantity for product selection.
KYA lists common nail sizes from 25–150mm in stock. Availability varies by size and finish; confirm current stock before ordering. The source page lists a free 5kg sample, with freight paid by the recipient. Confirm sample availability and shipping terms. The listed minimum order is one pallet (approximately 800–1,000kg) or one 20ft container; confirm the final quantity for the selected configuration.
For an accurate quotation, provide the required nail size, shank type, surface finish, packaging requirements, purchasing quantity and destination. For this product, reference model 3.4 × 70R or product code KYA-3470R.
Distributors, importers, pallet manufacturers, construction suppliers and other professional buyers can contact KYA to discuss common nail sizes and surface treatment requirements for bulk purchasing.
The nail has a nominal length of 70mm, approximately 2-3/4 inches, and a nominal shank diameter of 3.4mm, approximately 0.134 inch.
The rings around the shank engage with the surrounding wood fibers and provide greater resistance to withdrawal than a comparable smooth shank design. This can be useful for pallets, crates and other timber assemblies where resistance to loosening is important.
This product listing is for loose common nails. Buyers requiring wire coil, plastic collated, paper collated or other collated fasteners should specify the required nail format separately.
This product is shown with a galvanized finish. KYA's common nail range also lists bright, polished and vinyl-coated surface treatment options. Confirm the required finish when requesting a quotation.
Typical applications include pallet and crate manufacturing, general timber framing, wooden panels, carpentry and other professional wood-fastening work where a 70mm × 3.4mm ring shank nail meets the project requirements.
The current product specification lists 25 kg per carton. Buyers with specific packing or distribution requirements should include those requirements when requesting a quotation.
Provide the nail dimensions, required shank type, surface treatment, packaging requirements, order quantity and delivery destination. Referencing model 3.4 × 70R or code KYA-3470R will help identify this product.
