KYA 16mm Steel Wire Buckles are carbon steel buckles designed for use with compatible composite cord, woven, hot-melt and plastic strapping systems. The featured KYA-35 model is 16mm (5/8") wide, manufactured from 3.5mm wire, and has a published 659kg breaking load.
KYA lists both galvanized and phosphated finishes for this buckle range. The published packaging for KYA-35 is 1,000 pcs per box. Buckle width, wire diameter, finish and the selected strapping should be matched as a complete load-securing system.
The following specifications describe the featured KYA-35 buckle configuration.
| Parameter | Specification |
|---|---|
| Model | KYA-35 |
| Product Type | Steel Wire Strapping Buckle |
| Material | Carbon Steel |
| Buckle Width | 16mm (5/8") |
| Wire Diameter | 3.5mm |
| Published Breaking Load | 659kg |
| Finish Options | Galvanized / Phosphated |
| Published Packing | 1,000 pcs/box |
| Suitable Strapping | Compatible composite cord, woven, hot-melt and plastic strapping |
The published 659kg value is the KYA-35 buckle breaking load listed by KYA. It should not automatically be interpreted as the tested breaking strength of a complete strap-and-buckle system.
KYA publishes wire buckle configurations from 13mm through 50mm. Each model uses a specific buckle width, wire diameter, packing quantity and published breaking load.
| Model | Width | Wire Diameter | Pcs/Box | Breaking Load | Finish |
|---|---|---|---|---|---|
| KYA-30 | 13mm (1/2") | 3.3mm | 1,000 | 453kg | Galvanized / Phosphated |
| KYA-35 | 16mm (5/8") | 3.5mm | 1,000 | 659kg | Galvanized / Phosphated |
| KYA-40 | 19mm (3/4") | 4.0mm | 1,000 | 855kg | Galvanized / Phosphated |
| KYA-50 | 25mm (1") | 5.0mm | 500 | 1237kg | Galvanized / Phosphated |
| KYA-60 | 25mm (1") | 6.0mm | 500 | 1557kg | Galvanized / Phosphated |
| KYA-70 | 32mm (1-1/4") | 7.0mm | 250 | 2439kg | Galvanized / Phosphated |
| KYA-70A | 38mm (1-1/2") | 7.0mm | 150 | 3596kg | Galvanized / Phosphated |
| KYA-80 | 50mm (2") | 8.0mm | 100 | 4500kg | Galvanized / Phosphated |
Different buckle models should not be treated as interchangeable solely because their dimensions appear similar. Match the required buckle width, wire diameter, finish and load requirement to the selected strapping system.
Request Wire Buckle Specifications
KYA lists galvanized and phosphated surface finishes for the KYA-35 and other wire buckle sizes. The selected finish should be specified when ordering.
A galvanized finish provides a zinc-coated steel surface that offers corrosion protection compared with uncoated carbon steel. Actual suitability depends on moisture, chemicals, storage conditions and exposure duration.
Phosphated buckles are another published option and may be specified as part of a particular composite strapping system. Where a tested strap-and-buckle combination specifies one finish, use the stated buckle configuration.
KYA’s published company information describes more than 20 years of experience and states that its wire buckle production is tested by SGS and TÜV. Buyers requiring certification should request current reports and confirm that they cover the selected model, finish and intended strapping system.
KYA describes the galvanized or phosphated finish as protection against corrosion, seawater and weather exposure. Actual performance depends on the coating, exposure duration, salts, chemicals and storage conditions; confirm suitability for the service environment before ordering.
The published buckle information describes an automated production process and a self-locking design intended to resist strap slippage. Proper threading, a compatible strap and controlled tension are still required for the complete joint.
The 659kg breaking load published for KYA-35 describes the buckle specification listed by KYA. A complete strapping system includes the strap, buckle, threading arrangement and applied tension.
A 16mm strap-and-buckle system can therefore have a different tested system value from the standalone buckle specification. Do not use the 659kg buckle figure as a substitute for a complete system test value unless the relevant test documentation states that relationship.
For projects that specify a required system breaking strength, provide the exact strap model, buckle model, buckle finish and tensioning method for confirmation.
KYA lists its steel wire buckle range for use with compatible polyester composite cord strapping, woven cord strapping, hot-melt strapping and plastic strapping.
For KYA-35, the selected strap should be suitable for a 16mm buckle and should match the required load-securing system. Nominal strap width alone does not confirm complete compatibility because strap construction and thickness can also affect the joint.
KYA-35 wire buckles can be used as part of compatible 16mm strapping systems for industrial packaging and load securing.
Palletized industrial goods
Timber and lumber bundles
Steel tube and metal profile bundles
Aluminum products
Machinery and motors
Crates and export packaging
Building-material bundles
Warehouse and logistics packaging
Freight-forwarding applications
Composite cord and woven strapping systems
Thread the compatible strapping through the buckle according to the required buckle pattern. Position the strap around the load and use a suitable strapping tensioner to apply controlled tension.
Before releasing the tensioner, confirm that the strap is correctly seated in the buckle and that the joint remains stable under the applied tension.
Do not exceed the operating limits of the strap, buckle, tensioning equipment or packaged product. Sharp or abrasive load edges should be protected where necessary.
KYA-35 is the published 16mm (5/8") buckle configuration. Confirm the actual strap width before selecting the buckle.
KYA-35 uses 3.5mm carbon steel wire. Wire diameter is an important difference between KYA buckle models and should be checked when replacing an existing buckle.
The published KYA-35 buckle breaking load is 659kg. If your project specifies a complete strap-system strength rather than an individual buckle value, request confirmation of the complete configuration.
Both finishes are listed by KYA. Specify the required surface treatment when requesting a quotation or matching an existing system.
The tensioner must be suitable for the strap material, strap width, strap thickness and required applied tension. Buckle width alone does not determine tensioner compatibility.
Required buckle model: KYA-35 or another model
Required buckle width
Required wire diameter
Galvanized or phosphated finish
Strap material and width
Required breaking load or complete system performance
Existing tensioning equipment, if applicable
Required purchasing quantity
Packaging requirements, if applicable
Delivery destination
Send Your Wire Buckle Requirements
KYA-35 is a 16mm (5/8") steel wire buckle manufactured from 3.5mm carbon steel wire.
KYA publishes a 659kg breaking load for the KYA-35 buckle.
Not automatically. The 659kg value is published for the KYA-35 buckle. Complete system performance also depends on the selected strap, buckle engagement, threading arrangement and applied tension.
The published KYA-35 packing quantity is 1,000 pcs per box.
KYA lists both galvanized and phosphated finishes for KYA-35 and the wider wire buckle range.
KYA lists compatible composite cord, woven, hot-melt and plastic strapping. Confirm strap width, construction and thickness against the selected buckle before ordering.
KYA-35 is the published 16mm buckle size and can be considered for compatible 16mm strapping systems. Confirm the exact strap construction and required system performance before final selection.
KYA-30 is 13mm wide with 3.3mm wire and a published 453kg breaking load. KYA-35 is 16mm wide with 3.5mm wire and a published 659kg breaking load.
KYA-35 is 16mm wide with 3.5mm wire and a published 659kg breaking load. KYA-40 is 19mm wide with 4.0mm wire and a published 855kg breaking load.
Galvanizing provides corrosion protection compared with uncoated carbon steel. Actual service suitability depends on exposure conditions, moisture, chemicals and storage duration.
A compatible tensioner is normally used to apply controlled tension to the strapping. Select the tensioning equipment according to the strap material, width, thickness and required tension.
Do not substitute buckle models solely because another model has a higher breaking load. Buckle width, wire diameter and compatibility with the selected strapping all need to be checked.
KYA also supplies polyester composite cord strapping for use with compatible wire buckle systems. Match the strap width, buckle dimensions and required complete system performance when selecting components.
View the KYA strap and buckle catalog for additional buckle sizes, composite strapping and related load-securing products.
KYA supplies steel wire buckles and compatible strapping products for packaging distributors, manufacturers, logistics companies and industrial buyers. Send your required buckle model, finish, strap specification, quantity and delivery destination for product confirmation and quotation.
