| Width*Thickness*Pcs: | |
|---|---|
| Quantity: | |
KYA Industrial Staple Wire Band is a collated flat steel wire material designed for manufacturers producing industrial staples, brads and pins. Individual flattened wires are aligned and bonded into a continuous band for feeding into compatible fastener manufacturing equipment.
The product range includes galvanized steel, copper-coated steel and stainless steel wire options. Different width, thickness, wires-per-band, tensile-strength and surface configurations are available for different staple and brad production requirements.
The standard configurations listed on this page include sizes from 0.41 × 0.51 mm × 209 wires to 1.37 × 1.59 mm × 72 wires. Listed galvanized configurations have tensile strengths of 950–1050 N/mm², while the listed copper-coated configurations are 540–750 N/mm².
Staple wire band is a semi-finished material used in staple, brad and pin manufacturing. Multiple flattened steel wires are arranged in parallel and bonded together into a continuous strip or band.
The band is supplied to fastener manufacturers for feeding into compatible forming equipment. During production, the wire is separated, cut and formed into the required staple, brad or pin configuration.
Wire width, thickness, number of wires in the band, tensile strength and coating should be matched to the required finished fastener and production equipment.
| Item No. | Tensile Strength | Width × Thickness × Pcs | Coating | Packing |
|---|---|---|---|---|
| 01 | 950–1050 N/mm² | 0.58 × 0.75 mm × 167 | Galvanized | Wood Wheel |
| 02 | 950–1050 N/mm² | 0.65 × 0.95 mm × 125 | Galvanized | Wood Wheel |
| 03 | 950–1050 N/mm² | 1.00 × 1.25 mm × 100 | Galvanized | Wood Wheel |
| 04 | 950–1050 N/mm² | 1.37 × 1.59 mm × 72 | Galvanized | Wood Wheel |
| 05 | 950–1050 N/mm² | 0.41 × 0.51 mm × 209 | Galvanized | Wood Wheel |
| 06 | 540–750 N/mm² | 0.58 × 0.75 mm × 167 | Copper Coating | Wood Wheel |
| 07 | 540–750 N/mm² | 0.58 × 0.75 mm × 167 | Copper Coating | Wood Wheel |
The table represents the specific wire-band configurations currently listed for this product. Items 06 and 07 are shown with the same size, tensile-strength range, coating and packing specification.
For replacement material, compare the complete Width × Thickness × Pcs specification and tensile-strength requirement with the wire band already used on your production line.
The wire-band designation identifies the dimensions of the individual flattened wires and the number of wires assembled into the band.
| Parameter | Description |
|---|---|
| Width | Nominal width of each flattened wire. |
| Thickness | Nominal thickness of each flattened wire. |
| Pcs | Number of individual wires arranged in the continuous band. |
For example, 0.65 × 0.95 mm × 125 identifies the page-listed configuration using 0.65 × 0.95 mm flattened wire with 125 wires in the band.
When comparing specifications from different suppliers, confirm the dimensional drawing or existing sample because technical documents may use a different order when describing width and thickness.
The five galvanized configurations listed in the specification table have a tensile-strength range of 950–1050 N/mm². Electrogalvanized wire is available for production requiring a zinc-coated surface.
The listed copper-coated configuration is 0.58 × 0.75 mm × 167 with a tensile-strength range of 540–750 N/mm². Copper-coated wire should be selected according to the required finished fastener and forming process.
The product range also references stainless steel wire and bright surface options. Confirm the exact material grade, dimensions, tensile strength and availability for the required configuration before ordering.
| Attribute | Page-Listed Information |
|---|---|
| Steel Carbon Range | 0.06–0.50% carbon |
| Listed Standard SKU Tensile Range | 540–1050 N/mm² depending on listed configuration |
| Broader Product Range Reference | 800–1400 N/mm² is also referenced for the wider wire-band range; confirm the exact value for custom configurations. |
| Wire Before Flattening | 0.70–1.80 mm processing range |
| Surface Options | Electrogalvanized, copper-coated and other page-listed options |
| Band Color | Translucent or golden; other colors can be discussed according to requirements |
| Average Spool Weight | Approximately 35 kg according to the current product information |
Multiple wire sizes: Different width, thickness and wires-per-band configurations are available for different fastener production requirements.
Defined tensile-strength options: Specific page-listed configurations range from 540 to 1050 N/mm².
Different surface treatments: Galvanized and copper-coated configurations are listed, with additional material options referenced across the product range.
Continuous wire-band construction: Flattened wires are aligned and bonded into bands for industrial production feeding.
Protected reel packing: Corrugated cardboard, removable plastic foam and adhesive tape are used as protective packing components.
Custom production options: Wire dimensions, flattening, surface treatment, color and packaging can be discussed according to manufacturing requirements.
Industrial staple wire band is supplied as production material for fastener manufacturers rather than as a finished fastening product.
Industrial staple manufacturing
Brad nail manufacturing
Pin nail manufacturing
Office staple production
Fastener production for furniture and upholstery applications
Staple series or gauge alone may not be sufficient to select replacement wire band. Manufacturers should compare the full wire geometry and mechanical specification used by the existing production process.
| Information to Confirm | Details to Provide |
|---|---|
| Finished Fastener | Staple series, brad type, pin type or finished-product drawing. |
| Wire Width | Required flattened-wire width in millimeters. |
| Wire Thickness | Required flattened-wire thickness in millimeters. |
| Wires per Band | Number of individual wires in the collated band. |
| Tensile Strength | Required N/mm² range for the forming process. |
| Material and Coating | Galvanized, copper-coated, stainless steel or other required option. |
| Production Equipment | Machine model or existing wire-band specification when available. |
| Purchasing Quantity | Required quantity for quotation and production planning. |
Send Your Wire Band Specifications
The standard configurations listed on this page use wood wheel packaging. Corrugated cardboard is placed between rolls to increase pressure resistance during handling and transportation.
The outside layer can be protected with removable plastic foam and adhesive tape. The current product information also lists an average spool weight of approximately 35 kg.
Neutral packing or customized packing requirements can be discussed when placing an industrial order.
It is a semi-finished collated wire material used by manufacturers to produce staples, brads and pins for industrial and office fastening applications.
The listed configurations are 0.58 × 0.75 × 167, 0.65 × 0.95 × 125, 1.00 × 1.25 × 100, 1.37 × 1.59 × 72 and 0.41 × 0.51 × 209.
The specific configurations listed in the product table range from 540 to 1050 N/mm². The broader product information also references an 800–1400 N/mm² range for other wire-band requirements, so the exact tensile strength should be confirmed for the required configuration.
They use different surface treatments and may also have different mechanical specifications. On this page, the listed galvanized configurations are 950–1050 N/mm², while the listed copper-coated configuration is 540–750 N/mm².
It identifies the page-listed wire-band configuration by wire width × wire thickness × number of wires in the band. Confirm the dimension order against your existing specification when replacing material.
Yes. The current product information lists customizable wire dimensions, flattening, coating, color and packaging options. Provide the existing wire specification or finished fastener requirements for confirmation.
Yes. This product range is intended for manufacturing staples, brads and pins. The wire-band dimensions and mechanical properties must match the required finished fastener and forming equipment.
The listed configurations use wood wheel packing. Corrugated cardboard, removable plastic foam and adhesive tape are used as protective packing components.
Provide your finished staple, brad or pin specification, wire width, thickness, number of wires per band, tensile strength, coating, machine information and required purchasing quantity whenever available.
KYA supplies industrial staple wire band for staple manufacturers, brad and pin producers, fastener distributors and professional industrial buyers. Multiple galvanized and copper-coated configurations are listed, with additional material and dimensional requirements available for technical confirmation.
For an accurate quotation, send your Width × Thickness × Pcs specification, tensile-strength requirement, coating, finished fastener information and required quantity.
KYA states that its production is SGS-certified and serves customers in more than 50 countries. The stated shipping lead time from Qingdao is 20–30 days. Samples can be requested for quality evaluation; confirm the sample arrangement and order schedule with KYA.
