| Material: | |
|---|---|
| Length: | |
| Port of export: | |
| Quantity: | |
KYA 16 Gauge T Head Cleat Nails are designed for professional hardwood flooring installation, particularly 1/2-inch to 3/4-inch solid wood flooring and compatible tongue-and-groove flooring systems. Available in 38mm (1-1/2"), 45mm (1-3/4"), and 50mm (2") lengths, the carbon-steel version is manufactured from full-hard carbon steel and supplied in glue-collated strips. The product selector also lists a stainless steel option. Confirm the material and finish for the selected SKU before ordering.
The wide T-shaped head, ribbed shank, and cupped point provide mechanical holding strength while helping reduce the risk of wood splitting and fastener withdrawal. These flooring nails are intended for use with flooring nailers that accept the corresponding 16GA T-cleat profile.
Standard sizes: T38, T45, T50 | Gauge: 16GA (1.52mm) | Material: Full-Hard Carbon Steel (stainless steel option listed; confirm selected SKU) | Collation: Glue | Standard packing: 1,000 pcs/box.
KYA T-shaped cleat nails combine a hardened steel body with a specialized head and shank design for fastening hardwood flooring to suitable wood substrates.
Wide T-Shaped Head: The approximately 5.8mm head dimension provides a broad contact area to help secure flooring boards during installation.
Ribbed Shank: The ribbed section improves mechanical grip and helps resist fastener withdrawal after installation.
Cupped Point: Designed to penetrate wood while helping reduce the risk of splitting the flooring tongue.
Carbon-Steel Variant: Full-hard carbon steel provides rigidity for driving into hardwood and helps reduce bending during proper installation. Confirm the material variant shown for the selected SKU.
Glue-Collated Strips: Keep the cleats aligned for feeding through compatible flooring nailers.
Three Standard Lengths: T38, T45, and T50 provide different fastening depths to suit project requirements.
The following specifications describe KYA 16-gauge T-head flooring cleats. Buyers should verify the fastener dimensions and flooring nailer requirements before placing an order.
| Parameter | Specification |
|---|---|
| Product Type | T Head Cleat Nails / T-Shaped Flooring Cleats |
| Gauge | 16GA (1.52mm) |
| Head Dimension | 5.8mm |
| Length Range | 38mm–50mm (1-1/2"–2") |
| Available Sizes | T38, T45, T50 |
| Head Type | Wide T-Shaped Head |
| Shank | Ribbed (2/3) |
| Point | Cupped Point |
| Material | Full-hard carbon steel listed; stainless steel option also appears in the product selector. Confirm the selected SKU material. |
| Collation | Glue Collated |
| Nails Per Strip | 100 pcs |
| Standard Packaging | 1,000 pcs/box; 10 boxes/carton |
| Compatible Tool Type | Flooring nailers designed for 16GA T-cleats |
| Tool Brands Referenced | Bostitch, Powernail, Primatech, Senco; compatibility must be verified by individual nailer model |
| Primary Application | Solid hardwood flooring and compatible tongue-and-groove flooring |
KYA T Head Cleat Nails are supplied in three standard lengths. The packaging configurations below are intended for flooring distributors, construction fastener wholesalers, importers, and professional contractors.
| Model | Length (mm/inch) | Pcs/Strip | Pcs/Box | Boxes/Carton | Cartons/Pallet |
|---|---|---|---|---|---|
| T38 | 38mm / 1-1/2" | 100 | 1,000 | 10 | 60 |
| T45 | 45mm / 1-3/4" | 100 | 1,000 | 10 | 60 |
| T50 | 50mm / 2" | 100 | 1,000 | 10 | 45 |
Standard packaging contains 100 cleats per strip and 1,000 cleats per box. Each carton contains 10 boxes. Pallet quantities vary by model as shown above. Confirm packaging requirements and shipment details when requesting a quotation.
Get Bulk Pricing for T Cleat Nails
Selecting the correct flooring cleat length depends on the thickness of the flooring boards, subfloor construction, required fastener penetration, and the specifications of the flooring nailer.
T38 – 38mm (1-1/2"): The shortest standard length in the range. Check that it provides sufficient penetration for the flooring and subfloor combination.
T45 – 45mm (1-3/4"): An intermediate option where greater penetration than T38 is required.
T50 – 50mm (2"): The longest standard option in the range, intended for applications requiring deeper fastening where permitted by the flooring and tool specifications.
Important: Always follow the flooring manufacturer's fastening instructions. Verify the nailer model, accepted cleat profile, gauge, and length range before ordering or installing T-shaped flooring cleats.
T-shaped flooring cleats are primarily used for mechanical fastening of hardwood flooring to suitable wood subfloors. Other applications depend on the wood construction, fastening method, and tool compatibility.
Solid Hardwood Flooring: Designed for installing 1/2-inch to 3/4-inch solid wood flooring where 16GA T-cleats are specified.
Tongue-and-Groove Flooring: Supports concealed fastening through the flooring tongue using compatible flooring nailers.
Engineered Wood Flooring: May be suitable for selected mechanically fastened flooring systems when expressly permitted by the flooring manufacturer.
Decorative Wood Paneling: Can be considered for compatible wood panel fastening applications.
Ceiling and Subfloor Applications: Use only where the fastening design and equipment specifications permit T-cleat fasteners.
KYA 16GA T Head Cleat Nails are intended for flooring nailers designed to accept 16-gauge T-shaped cleats. Compatibility cannot be established from the tool brand alone.
Buyers using Bostitch, Powernail, Primatech, Senco, or other flooring nailer brands should check the specific tool manufacturer's requirements. Some flooring nailers accept L-shaped cleats rather than T-shaped cleats, while certain multi-fastener models may accept both.
Before ordering, confirm the following:
Fastener gauge: 16GA
Fastener head profile: T-shaped
Accepted cleat length: 38mm, 45mm, or 50mm
Collation and strip configuration
Exact flooring nailer model and manufacturer specifications
If you are replacing another supplier's flooring cleats, provide the existing fastener dimensions and nailer model when requesting a quotation.
KYA Fasteners supplies T-shaped flooring cleat nails for flooring material distributors, hardware wholesalers, fastener importers, professional installers, and industrial supply businesses.
The T38, T45, and T50 range allows professional buyers to source multiple standard lengths within the same 16GA T-cleat product family.
Standard Models: T38, T45, T50
Standard Packing: 1,000 pcs/box, 10 boxes/carton
Listed MOQ: 10 cartons, subject to order confirmation
OEM Options: Custom length requirements may be discussed and confirmed before ordering
Reference Lead Time: 15–25 days, subject to specification, order quantity, and production confirmation
Order Support: Product specifications, packing information, tool compatibility checks, and bulk quotations
For an accurate quotation, provide the required model, order quantity, destination country, flooring nailer model, and any packaging requirements.
16 Gauge T Head Cleat Nails are primarily designed for fastening solid hardwood and compatible tongue-and-groove flooring to suitable wood subfloors. They provide concealed mechanical fastening when installed using an appropriate flooring nailer.
KYA offers three standard 16GA T-cleat lengths: T38 at 38mm (1-1/2"), T45 at 45mm (1-3/4"), and T50 at 50mm (2"). The correct length depends on flooring thickness, subfloor construction, and installation requirements.
T-cleats and L-cleats have different head profiles. Both are used for hardwood flooring installation, but they are not automatically interchangeable. Check whether your flooring nailer accepts T-shaped cleats, L-shaped cleats, or both before choosing a fastener.
These fasteners are designed for flooring nailers that accept 16-gauge T-shaped cleats in the specified length range. Compatibility with Bostitch, Powernail, Primatech, Senco, and other brands depends on the individual nailer model. Consult the tool manual before ordering.
Some engineered hardwood flooring systems permit mechanical cleat fastening, while others require different installation methods. Follow the flooring manufacturer's instructions and verify the specified fastener gauge, type, length, and installation method.
The ribbed or serrated section increases mechanical engagement with the wood and helps resist fastener withdrawal. It supports secure fastening when the correct cleat size and installation method are used.
The cupped point is designed to help the cleat penetrate wood while reducing the risk of splitting the flooring tongue. Actual results depend on wood species, flooring condition, nailer adjustment, and installation technique.
The standard packaging contains 100 cleats per strip, 1,000 cleats per box, and 10 boxes per carton. Standard pallet quantities are 60 cartons for T38 and T45, and 45 cartons for T50.
The specified full-hard carbon steel T-cleats are primarily intended for interior hardwood flooring applications. For exterior, humid, or corrosive environments, the material and corrosion-resistance requirements must be evaluated separately.
The required quantity depends on the installation area, flooring board width, fastening spacing, and flooring manufacturer's instructions. Calculate the fastener requirement from the approved fastening schedule rather than using a fixed quantity for every project.
Yes. KYA provides bulk quotation assistance for flooring distributors, fastener wholesalers, importers, and professional buyers. Include the required cleat size, order quantity, destination market, and packaging details with your inquiry.
Looking for 16 Gauge T Head Cleat Nails for hardwood flooring or wholesale distribution? Contact KYA Fasteners to discuss T38, T45, and T50 specifications, packaging configurations, tool compatibility, and bulk pricing.
Please provide your required size, estimated order quantity, destination country, and flooring nailer model so the product requirements can be reviewed before quotation.
