| Material: | |
|---|---|
| Surface Treatment: | |
| Quantity: | |
KYA 15° Plastic Sheet Concrete Steel Coil Nails 2.6×38mm are #45 high-carbon steel fasteners designed for professional direct-fastening applications involving compatible concrete, steel, wood and metal assemblies.
The featured fastener has a 2.6 mm (0.102") shank diameter, 38 mm (1.5") length, 5.5 mm head diameter, smooth shank and diamond point. It uses a mechanical galvanized finish and 15° plastic sheet collation.
Each coil contains 300 nails, with 40 coils per carton. The #45 high-carbon steel construction and 38 mm length make this specification suitable for compatible direct-fastening work requiring a hardened concrete steel nail with deeper penetration than shorter versions in the same range.
| Parameter | Specification |
|---|---|
| Model | 2.6×38mm |
| Product Type | Plastic Sheet Collated Concrete Steel Coil Nail |
| Shank Diameter | 2.6 mm (0.102") |
| Length | 38 mm (1.5") |
| Head Diameter | 5.5 mm |
| Shank Type | Smooth Shank |
| Point Type | Diamond Point |
| Collation | 15° Plastic Sheet |
| Finish | Mechanical Galvanized |
| Material | #45 High-Carbon Steel |
| Nails per Coil | 300 |
| Coils per Carton | 40 |
| Tool Requirement | Direct-fastening or concrete nailer specifically rated for the complete 2.6×38mm, 15° plastic-sheet-collated fastener configuration |
The featured 2.6×38mm concrete steel nail is manufactured from #45 high-carbon steel. This hardened material is intended for compatible direct-fastening applications where penetration into concrete, steel or other hard base materials is required.
The current product information references penetration into steel up to 2 mm. Actual penetration depends on steel grade and hardness, base-material condition, fastening-tool power, attached component and installation conditions.
The 2.6×38mm nail uses a diamond point. Its pointed geometry concentrates driving force at the nail tip during installation into compatible base materials.
Concrete strength, aggregate hardness, steel thickness, embedment depth and fastening-tool energy all affect penetration and final fastening performance.
This model uses a smooth shank. The straight shank profile is designed for direct driving into compatible concrete, steel and construction assemblies using an appropriate fastening tool.
The 38 mm length provides greater overall fastener length than the shorter 18 mm and 25 mm versions in this product family. Selection should be based on fixture thickness, required penetration and base-material conditions.
The featured nail has a 5.5 mm head diameter. Head size affects the bearing surface on the attached component and is also an important tool-matching parameter because the driver, nose, magazine and feed system must accommodate the complete fastener geometry.
The featured 2.6×38mm product uses a mechanical galvanized finish. The zinc-based coating provides corrosion protection to the steel fastener while retaining the dimensional characteristics required for direct-fastening applications.
Mechanical galvanizing is a different coating process from electro galvanizing and hot dip galvanizing. For highly corrosive, marine or continuously exposed environments, confirm the required coating specification before selecting the fastener.
The nails are assembled in a 15° plastic sheet coil for automatic feeding through compatible direct-fastening equipment. The plastic carrier maintains nail alignment while the nail separates from the collation material during driving.
Each coil contains 300 nails. Collation angle alone does not determine compatibility; nail diameter, length, head size, plastic-sheet geometry and the complete coil format must also match the tool.
The featured 2.6×38mm model uses a diamond point. Additional point geometries are available within the wider KYA nail range for different fastening requirements.
KYA supplies smooth, screw and ring shank configurations across different nail ranges. The product on this page is specifically a 2.6×38mm smooth-shank concrete steel coil nail.
Shank configurations should not be treated as interchangeable without confirming the base material, fastening requirement and approved tool specification.
The featured product measures 2.6 mm in shank diameter and 38 mm in nail length. Additional plastic sheet coil nail dimensions are available within the wider KYA range for different fastening depths and applications.
2.6×38mm specification: 2.6 mm shank diameter with 38 mm overall nail length.
#45 high-carbon steel: Hardened steel construction for compatible concrete and steel fastening applications.
Smooth shank: Straight shank geometry intended for direct driving through suitable fixtures and base materials.
Diamond point: Point geometry designed to concentrate driving force at the nail tip.
5.5 mm head: Full round head configuration for the featured specification.
Mechanical galvanized finish: Zinc coating provides corrosion protection for suitable construction environments.
15° plastic sheet collation: Holds the fasteners in coil form for automatic feeding through compatible equipment.
300 nails per coil: High-capacity format for repetitive fastening work.
40 coils per carton: Standard listed carton packing.
The 2.6×38mm concrete steel nail is intended for professional direct-fastening applications where the complete fastener specification, substrate and fastening tool are compatible.
Steel-to-concrete fastening for suitable furring strip installations.
Steel-to-wood fastening for compatible framing and assembly applications.
Concrete formwork for suitable temporary fastening applications.
Drywall track installation involving compatible metal track and base materials.
Electrical boxes and conduit clips where the attachment, substrate and direct-fastening system are suitable.
Explore Plastic Sheet Coil Nails
Do not select a nailer based only on the nominal 15° angle. A compatible fastening tool must accept the complete nail and collation specification.
| Compatibility Parameter | This Product |
|---|---|
| Fastener Type | Concrete Steel Coil Nail |
| Shank Diameter | 2.6 mm (0.102") |
| Nail Length | 38 mm (1.5") |
| Head Diameter | 5.5 mm |
| Shank | Smooth |
| Point | Diamond |
| Collation Angle | 15° |
| Collation Material | Plastic Sheet |
| Tool Requirement | Concrete or direct-fastening nailer explicitly approved for the complete 2.6×38mm plastic-sheet coil nail configuration |
When replacing an existing fastener, provide the nailer manufacturer, exact tool model, current fastener code and physical fastener dimensions. This allows the nail diameter, length, head size and collation geometry to be compared before ordering.
The featured 2.6×38mm smooth-shank model uses a mechanical galvanized finish. Other finishes and materials are available within the broader KYA nail range.
| Finish / Material | Product Range Information |
|---|---|
| Bright | Uncoated option within the wider product range. |
| Electro Galvanized | Zinc-coated option for applications requiring light corrosion protection. |
| Mechanical Galvanized | Featured finish for this 2.6×38mm model. |
| Hot Dip Galvanized | Available within the broader range where a different galvanized coating specification is required. |
| Stainless Steel 304 / 316 | Available within the wider range for applications requiring stainless steel material. |
| #45 Steel Electro-Galvanized | High-hardness option referenced within the wider product range. |
In addition to the featured 2.6×38mm specification, the current product information lists custom nail diameters from approximately 1.60–3.33 mm and nail lengths from 18–50 mm.
Different lengths and finishes can be discussed according to the required fastening application. Provide the nail diameter, length, head diameter, shank type, point, material, finish and application when requesting a custom specification.
| Item | Information |
|---|---|
| Nails per Coil | 300 |
| Coils per Carton | 40 |
| MOQ | 1 pallet |
| Custom Options | Custom length and finish |
| Lead Time | 15–25 days |
This model has a 2.6 mm (0.102") shank diameter, 38 mm (1.5") nail length and 5.5 mm head diameter.
The featured nail is made from #45 high-carbon steel.
The featured 2.6×38mm model uses a mechanical galvanized finish.
This model uses a smooth shank and diamond point.
Each coil contains 300 nails, and the current packing lists 40 coils per carton.
It is designed as a concrete steel nail for compatible direct-fastening applications. Suitability depends on concrete strength, aggregate, fixture thickness, required embedment and fastening-tool capability.
The current product information references penetration into steel up to 2 mm. Actual performance depends on steel grade, hardness, thickness, driving energy and installation conditions.
Mechanical galvanizing applies a zinc-based coating to the steel surface to provide corrosion protection. The required coating specification should be selected according to the service environment.
No. The tool must accept the complete 2.6 mm diameter, 38 mm length, 5.5 mm head and 15° plastic-sheet collation specification. The nominal collation angle alone does not establish compatibility.
The product is intended for compatible steel-to-concrete fastening, furring strips, steel-to-wood assemblies, concrete formwork, drywall track and attachment of suitable electrical boxes or conduit clips.
The current product range lists custom diameters from approximately 1.60–3.33 mm and nail lengths from 18–50 mm, together with different finish options.
The currently listed minimum order quantity is 1 pallet.
Provide the required nail diameter, nail length, head diameter, shank type, point, material, finish, collation, base material, attached component, fastening-tool manufacturer and model, and purchasing quantity whenever available.
KYA Fasteners has produced industrial fasteners since 2003 and supplies fastening products to customers in more than 50 countries. The featured 2.6×38mm product combines #45 high-carbon steel, a smooth shank, diamond point, mechanical galvanized finish and 15° plastic sheet collation.
The current product information lists an MOQ of 1 pallet, custom length and finish options, and a listed lead time of 15–25 days.
For specification confirmation or bulk purchasing, provide the required quantity, fastening application, base material and exact fastening-tool information together with the current fastener specification when available.
