| Quantity: | |
|---|---|
15 Degree Ring Shank Galvanized Coil Roofing Nails 1-3/4 Inch x .120 Inch are wire collated roofing nails designed for 15 degree coil roofing nailers. They are used for attaching shingles, roof sheathing, wall sheathing, gypsum board and other roofing or construction materials where fast feeding, corrosion resistance and strong holding power are required.
KYA KYA-3.05x45R roofing nails feature 0.120 inch / 3.05mm shank diameter, 1-3/4 inch length, 15 degree wire collation, steel construction, wide head design and diamond point for easy penetration. Ring shank options provide stronger grip and help reduce back-out, making them suitable for shingle fastening and demanding roofing applications.
15 degree coil roofing nails are engineered for fast and stable use in pneumatic coil roofing nailers. The wire collated coil format supports continuous fastening, while the wide head helps increase surface contact, strengthen hold and reduce pull-through when attaching roofing materials.
15 degree roofing nailer compatibility: Designed for 15 degree coil roofing nailers used in shingle and sheathing installation.
Ring shank holding power: Ring shank profile grips wood fibers and helps reduce nail back-out in roofing applications.
Galvanized corrosion resistance: Electro galvanized and hot dipped galvanized options help resist corrosion and rust.
Wide head design: Helps strengthen hold and reduce pull-through when fastening shingles and roofing materials.
Diamond point: Supports easy penetration into roofing substrates and wood-based materials.
Reliable coil feeding: Steel construction and wire collation help prevent jamming and improve jobsite efficiency.
| Specification | Details |
|---|---|
| Product Name | 15 Degree Ring Shank Galvanized Coil Roofing Nails 1-3/4 Inch x .120 Inch |
| Model | 1-3/4 Inch x .120 Inch |
| Brand | KYA |
| Code | KYA-3.05x45R |
| Fastener Type | Coil Roofing Nails / Ring Shank Roofing Nails / Wire Collated Roofing Nails |
| Degree | 15 Degree |
| Material | Steel |
| Diameter | 0.120 inch / 3.05mm |
| Length | 1-3/4 inch / 45mm; available range 25mm to 150mm |
| Shank | Smooth, Ring, Screw |
| Point | Diamond Point |
| Collation | Wire Collated Coil |
| Finishing | Bright, Electro Galvanized (EG), Hot Dip Galvanized (HDG), DACR, MechGalv, Heat Treated, #304 Stainless Steel, #316 Stainless Steel |
| Coating | Yellow, Red, Blue |
| Compatible Tool | 15 degree coil roofing nailers |
| Main Applications | Shingles, roof sheathing, wall sheathing, gypsum board, wood packaging, industrial fencing and roofing applications |
| Finish | Length | Shank Diameter | Shank Type | Pcs./Box |
|---|---|---|---|---|
| Electro Galvanized | ||||
| EG | 3/4 in. | 0.120 in. | Smooth | 7200 |
| EG | 7/8 in. | 0.120 in. | Smooth | 7200 |
| EG | 1 in. | 0.120 in. | Smooth | 7200 |
| EG | 1-1/4 in. | 0.120 in. | Smooth | 7200 |
| EG | 1-1/2 in. | 0.120 in. | Smooth | 7200 |
| EG | 1-3/4 in. | 0.120 in. | Smooth | 7200 |
| EG | 3/4 in. | 0.120 in. | Ring | 7200 |
| EG | 1-1/4 in. | 0.120 in. | Ring | 7200 |
| EG | 1-1/2 in. | 0.120 in. | Ring | 7200 |
| Hot Dipped Galvanized | ||||
| HDG | 1 in. | 0.120 in. | Smooth | 7200 |
| HDG | 1-1/4 in. | 0.120 in. | Smooth | 7200 |
| HDG | 1-1/2 in. | 0.120 in. | Smooth | 7200 |
| HDG | 1-3/4 in. | 0.120 in. | Smooth | 7200 |
| #304 Stainless Steel | ||||
| #304 SS | 3/4 in. | 0.120 in. | Smooth | 3600 |
| #304 SS | 7/8 in. | 0.120 in. | Smooth | 3600 |
| #304 SS | 1 in. | 0.120 in. | Smooth | 3600 |
| #304 SS | 1-1/4 in. | 0.120 in. | Smooth | 3600 |
| #304 SS | 1-1/2 in. | 0.120 in. | Smooth | 3600 |
| #304 SS | 1-3/4 in. | 0.120 in. | Smooth | 3600 |
| #316 Stainless Steel | ||||
| #316 SS | 3/4 in. | 0.120 in. | Ring | 3600 |
| #316 SS | 7/8 in. | 0.120 in. | Ring | 3600 |
| #316 SS | 1 in. | 0.120 in. | Ring | 3600 |
| #316 SS | 1-1/4 in. | 0.120 in. | Ring | 3600 |
| #316 SS | 1-1/2 in. | 0.120 in. | Ring | 3600 |
| #316 SS | 1-3/4 in. | 0.120 in. | Ring | 3600 |
Nail Head
Nail Shank
Nail Point
| Shank Type | Performance | Recommended Use |
|---|---|---|
| Smooth Shank | Common shank type with easy driving and standard holding power. | General construction, roofing and applications where extra withdrawal resistance is not required. |
| Ring Shank | Ring profile grips wood fibers and improves holding strength. | Shingles, roof sheathing, softer wood and high-wind roofing applications requiring better pullout resistance. |
| Screw Shank | Spins during driving to create a tight groove and reduce backing out. | Hardwoods, packaging, pallets and selected construction fastening applications. |
| Annular Thread Shank | Externally beveled rings enhance grip and help prevent back-out. | Wood and sheetrock applications where back-out resistance is important. |
15 degree ring shank coil roofing nails are designed for roofing, sheathing and construction fastening where continuous coil feeding, corrosion resistance and strong holding power are important. They are suitable for roofing contractors, builders, distributors and industrial fastening users.
Attaching shingles to roofs with 15 degree coil roofing nailers
Roof sheathing and wall sheathing fastening
Gypsum board fastening and selected sheet material installation
Wood packaging and general construction fastening
Industrial fencing and outdoor construction work
High-wind roofing applications requiring better pull-through resistance and holding strength
| Finish | Description | Recommended Use |
|---|---|---|
| Bright Finish | Uncoated finish with no added corrosion protection. | Dry indoor or temporary applications where corrosion resistance is not required. |
| Electro Galvanized (EG) | Thin zinc layer that helps resist corrosion and rust in low-moisture environments. | Roofing or construction in low-humidity environments where moderate corrosion protection is acceptable. |
| Hot Dip Galvanized (HDG) | Zinc-coated finish for stronger outdoor corrosion protection. | Outdoor roofing, sheathing and weather-exposed construction applications. |
| #304 Stainless Steel | Stainless steel finish for high corrosion resistance. | Exterior construction and roofing applications requiring stronger corrosion resistance. |
| #316 Stainless Steel | Higher corrosion resistance for harsh or salt-exposed environments. | Coastal roofing projects, high-salt exposure and demanding exterior fastening. |
| Selection Point | Available Options | Recommendation |
|---|---|---|
| Nailer Compatibility | 15 degree coil roofing nailers | Confirm your roofing nailer supports 15 degree wire collated coil nails and 0.120 inch shank diameter. |
| Nail Length | 3/4 in. to 1-3/4 in. listed; broader range 25mm to 150mm | Choose length according to shingle thickness, sheathing thickness and local roofing requirements. |
| Shank Type | Smooth, ring, screw | Use ring shank for stronger holding power and high-wind roofing; use smooth shank for standard fastening. |
| Finish | EG, HDG, #304 SS, #316 SS | Use HDG or stainless steel for outdoor roofing; use #316 stainless steel for coastal or salt-exposed roofing. |
| Packing Quantity | 7200 pcs/box for galvanized options; 3600 pcs/box for stainless steel options | Select packing based on project size, distributor inventory and roofing contractor usage. |
They are used for attaching shingles to roofs, roof sheathing, wall sheathing, gypsum board, wood packaging, industrial fencing and other roofing or construction fastening applications with 15 degree coil roofing nailers.
Ring shank roofing nails grip wood fibers more aggressively than smooth shank nails. This improves holding power, helps prevent back-out and supports better performance in softer wood and high-wind roofing areas.
These nails are designed for 15 degree coil roofing nailers. Before ordering, confirm collation angle, wire coil format, shank diameter, nail length and magazine capacity.
Electro galvanized nails offer limited corrosion protection and are more suitable for low-humidity environments. For outdoor roofing, hot dip galvanized or stainless steel nails are usually preferred, especially in wet or coastal areas.
#316 stainless steel is recommended for coastal or high-salt environments. Hot dip galvanized and #304 stainless steel may also be used depending on exposure level, project specification and local requirements.
Wide heads increase surface contact with the roofing material, strengthen holding power and help reduce pull-through. This is important for secure shingle attachment and roofing durability.
Galvanized roofing nail options are commonly listed as 7200 pcs per box. Stainless steel roofing nail options are commonly listed as 3600 pcs per box.
Yes. KYA can discuss sample orders, nailer compatibility, shank type, finish, length, packing, custom specifications, bulk quantity and shipping schedule according to your roofing or distribution needs.
KYA Fasteners supplies coil roofing nails, ring shank roofing nails, galvanized roofing nails, stainless steel roofing nails, coil nails, framing nails, pneumatic nailers, staples, hog rings, wire products and industrial fastening solutions for global customers. For roofing and construction applications, KYA provides 15 degree coil roofing nails with size selection, finish options and bulk supply support.
Contact KYA to get factory-direct pricing for 15 Degree Ring Shank Galvanized Coil Roofing Nails 1-3/4 Inch x .120 Inch, including nailer compatibility, finish options, samples, custom packing, bulk order quantity and shipping schedule.
