| Finish: | |
|---|---|
| Quantity: | |
15 Ga Angled Finish Nails 34 Degree DA Series are glue collated finish nails designed for 34-degree 15 gauge angled finish nailers. These DA Series finish nails feature a chisel point, precise 34° collation, smooth or ring shank options, and stable feeding performance for finish carpentry, trim installation, molding, cabinetry, picture frame assembly and decorative woodwork.
KYA 15 gauge DA angled finish nails are available in galvanized and 304 stainless steel finishes for improved rust resistance in indoor finishing work and selected moisture-sensitive applications. Lengths range from 25mm / 1 inch to 64mm / 2-1/2 inch, making them suitable for light trim, baseboard, crown molding, cabinet assembly, furniture making and floor strip fastening.
34 degree DA Series finish nails are used where precise fastening, clean appearance and reliable nailer feeding are important. The angled collation helps the nailer reach corners and tight trim positions more easily than straight finish nail systems, while the 15 gauge wire provides stronger holding power than thinner brad nails for many finish carpentry applications.
34-degree DA compatibility: Designed for 34-degree 15 gauge angled finish nailers and DA Series compatible tools.
Glue collation: Helps reduce tool jams and supports smooth feeding during repetitive finish work.
15 gauge holding power: Provides strong fastening for molding, trim, cabinetry and furniture applications.
Chisel point: Supports easy penetration and accurate driving in wood finishing applications.
Smooth and ring shank options: Smooth shank supports clean driving, while ring shank improves holding power in softer woods.
Rust-resistant finishes: Galvanized and 304 stainless steel options support different corrosion resistance requirements.
| Specification | Details |
|---|---|
| Product Name | 15 Ga Angled Finish Nails 34 Degree DA Series |
| Model | 1 Inch – 2-1/2 Inch |
| Brand | KYA |
| Code | KYA-DA SERIES |
| Fastener Type | 15 Gauge Angled Finish Nails / DA Series Finish Nails |
| Gauge | 15 GA |
| Head Width | 3.10mm / 3.1mm |
| Width | 1.76mm |
| Thickness | 1.76mm |
| Length Range | 25mm to 64mm / 1 inch to 2-1/2 inch |
| Shank Type | Smooth, Ring |
| Finishing | Galvanized, Stainless Steel (304 SS) |
| Collation | Glue Collated, 34° Angle |
| Point Type | Chisel Point |
| Similar To | BaA SKDA, DUOFAST DA, FASCO BA, MXA NF15, HOLZHER, 1.8 SENCO DA/UA, PREBENA DA, SPOTNILS 15GAB |
| Compatible Tools | 34-degree 15 gauge angled finish nailers and DA Series compatible finish nailers |
| Main Applications | Furniture making, cabinetwork, indoor decoration, trim, baseboard, molding, picture frame assembly, floor boards, floor strips and decorative strips |
| Item | Length (mm/inch) | Pcs/Stick | Pcs/Box | Boxes/Carton | Cartons/Pallet |
|---|---|---|---|---|---|
| DA/25 | 25mm (1") | 100 | 4000 | 4 | 120 |
| DA/32 | 32mm (1-1/4") | 100 | 4000 | 4 | 120 |
| DA/38 | 38mm (1-1/2") | 100 | 4000 | 4 | 90 |
| DA/45 | 45mm (1-3/4") | 100 | 4000 | 4 | 80 |
| DA/50 | 50mm (2") | 100 | 4000 | 4 | 60 |
| DA/57 | 57mm (2-1/4") | 100 | 4000 | 4 | 60 |
| DA/64 | 64mm (2-1/2") | 100 | 4000 | 4 | 60 |
34-degree angled collation: Helps users fasten trim, molding and cabinetry in corners and tighter positions.
Glue collated strips: Reduce tool jams and improve smooth operation in compatible finish nailers.
Galvanized or 304 stainless steel: Provides rust resistance for finish carpentry and decorative applications.
Chisel point and high hardness: Support easy driving, accurate penetration and precise fastening.
Ring shank option: Improves holding power in softer woods and helps reduce nail back-out.
Wide length range: 25mm to 64mm sizes cover light trim, baseboard, molding, cabinetry and heavier finish work.
15 gauge 34 degree angled finish nails are suitable for professional finish carpentry where clean appearance, holding power and accurate fastening are required. The DA Series is commonly used by cabinet makers, trim installers, furniture manufacturers, picture frame producers and interior decoration contractors.
Furniture making and cabinetwork
Indoor decorations and finish carpentry
Trim and baseboard installation
Molding and crown molding installation
Picture frame assembly
Cladding floor boards, floor strips and decorative strips
| Finish | Description | Recommended Use |
|---|---|---|
| Galvanized Finish | Zinc-coated finish for general rust resistance. | Indoor trim, molding, cabinetry and furniture applications where standard rust resistance is required. |
| 304 Stainless Steel | Stainless steel finish with higher corrosion resistance than standard galvanized finish nails. | Moisture-sensitive, corrosion-sensitive or higher durability finish carpentry applications. |
| Selection Point | DA Series Requirement | Recommendation |
|---|---|---|
| Nailer Compatibility | 34-degree 15 gauge angled finish nailers | Confirm your nailer accepts DA Series 34° glue collated 15 gauge finish nails. |
| Nail Length | 25mm, 32mm, 38mm, 45mm, 50mm, 57mm, 64mm | Choose shorter nails for light trim and longer nails for baseboards, cabinetry and heavier molding. |
| Shank Type | Smooth, ring | Use ring shank when enhanced holding power is required in softer woods. |
| Finish | Galvanized, 304 stainless steel | Choose 304 stainless steel when stronger corrosion resistance is required. |
| Application | Trim, molding, cabinetry, furniture, picture frames and decorative strips | Match nail length and finish to material thickness, exposure environment and required holding strength. |
They are used for furniture making, cabinetwork, trim, baseboard installation, molding, picture frame assembly, indoor decorations, floor boards, floor strips and decorative strips.
These nails are compatible with 34-degree 15 gauge angled finish nailers and similar DA Series systems, including DUOFAST DA, SENCO DA/UA, PREBENA DA and other compatible tools. Always confirm angle, gauge, length and collation with your nailer specification.
Glue collation keeps finish nails aligned in the strip, supports smooth feeding and helps reduce tool jams. This improves efficiency for trim, molding and fine carpentry work.
Yes. Galvanized finish nails provide standard rust resistance, while 304 stainless steel finish nails offer higher corrosion resistance for more demanding environments.
Ring shank nails improve holding power in softer woods and help reduce nail back-out over time. They are useful when stronger retention is required in finish carpentry or decorative wood applications.
Available lengths include 25mm, 32mm, 38mm, 45mm, 50mm, 57mm and 64mm, equivalent to 1 inch through 2-1/2 inch.
Choose length based on trim thickness, substrate material and required holding strength. Shorter sizes are suitable for light trim and picture frames, while longer sizes are better for baseboards, cabinetry and heavier molding.
Yes. KYA can discuss sample orders, length selection, galvanized or 304 stainless steel finish, smooth or ring shank, carton packing, pallet quantity, bulk order quantity and shipping schedule.
KYA Fasteners supplies 15 gauge angled finish nails, DA Series finish nails, brad nails, pin nails, framing nails, coil nails, pneumatic nailers, industrial staples, hog rings and fastening solutions for global woodworking, furniture, construction and distributor customers. For trim, molding, cabinetry and decorative applications, KYA provides nail size selection, finish options, compatible tool support and bulk supply service.
Contact KYA to get factory-direct pricing for 15 Ga Angled Finish Nails 34 Degree DA Series, including length selection, galvanized or 304 stainless steel finish, smooth or ring shank, nailer compatibility, samples, carton packing, bulk quantity and delivery schedule.
