2 Inch Finish Nails Stainless Steel 15 Gauge 34 Degree are DA-style angled finish nails designed for professional trim work, cabinetry, furniture making, baseboards, crown molding, window casing, door casing, cladding floor boards, and decorative wood installation. Made from 304 stainless steel, these nails provide strong corrosion resistance and help reduce staining on natural finish wood, exterior trim, and pressure-treated lumber.
KYA Fasteners supplies 15 gauge 34 degree stainless steel finish nails for contractors, carpenters, furniture manufacturers, cabinet factories, woodworking shops, hardware distributors, and OEM fastener buyers. These glue-collated 15GA DA finishGA DA finish nails are compatible with many 34-degree angled finish nailers and are available from 1" to 2-1/2" lengths.
304 stainless steel: Provides corrosion resistance and helps prevent staining on natural wood, trim, and pressure-treated lumber.
15 gauge strength: Offers stronger holding power than thinner brad nails for finish carpentry and trim work.
34 degree angled collation: Helps reach tight corners and confined areas during baseboard, casing, and cabinet installation.
2 inch length: Suitable for trim, molding, cabinet work, furniture frames, cladding boards, and decorative wood fastening.
Glue collated strips: Designed for stable feeding in compatible 15 gauge angled finish nailers.
Chisel point: Supports efficient penetration and dependable fastening performance.
Smooth or ring shank: Smooth shank supports clean finish work; ring shank improves holding power where required.
| Product Name | 2 Inch Finish Nails Stainless Steel 15 Gauge 34 Degree |
|---|---|
| Fastener Type | DA Style Angled Finish Nails / 15 Gauge Finish Nails |
| Material | 304 Stainless Steel |
| Finish | Stainless Steel |
| Gauge | 15 Gauge |
| Collation Angle | 34 Degree |
| Head Width | 3.1 mm |
| Wire Width | 1.76 mm |
| Thickness | 1.76 mm |
| Standard Length | 2" / 50 mm |
| Available Length Range | 1" to 2-1/2" / 25 mm to 64 mm |
| Shank Type | Smooth Shank / Ring Shank |
| Point Type | Chisel Point |
| Collation Type | Glue Collated Angled Strip |
| Compatible Tools | BaA SKDA, DUOFAST DA, FASCO BA, MXA NF15, HOLZHER, SENCO DA/UA, PREBENA DA, SPOTNILS 15GAB, and similar 15 gauge 34 degree DA finish nailers. |
| Packaging | 100 pcs/stick, 4,000 pcs/box, 4 boxes/carton |
| Main Applications | Furniture making, cabinetry, trim, baseboards, crown molding, door casing, window casing, cladding floor boards, floor strips, and decoration strips. |
| Item | Length | Pcs/Stick | Pcs/Box | Boxes/Carton | Cartons/Pallet |
|---|---|---|---|---|---|
| DA/25 | 25 mm / 1" | 100 | 4,000 | 4 | 120 |
| DA/32 | 32 mm / 1-1/4" | 100 | 4,000 | 4 | 120 |
| DA/38 | 38 mm / 1-1/2" | 100 | 4,000 | 4 | 90 |
| DA/45 | 45 mm / 1-3/4" | 100 | 4,000 | 4 | 80 |
| DA/50 | 50 mm / 2" | 100 | 4,000 | 4 | 60 |
| DA/57 | 57 mm / 2-1/4" | 100 | 4,000 | 4 | 60 |
| DA/64 | 64 mm / 2-1/2" | 100 | 4,000 | 4 | 60 |
2 inch 15 gauge finish nails are commonly used when the project requires stronger holding power than 18 gauge brad nails but still needs a clean finish. Stainless steel material makes them suitable for moisture-prone woodwork, exterior trim, and applications where rust stains must be avoided.
| Application | Why This Nail Works | Recommended Option |
|---|---|---|
| Baseboards and Trim | 15 gauge nails provide strong holding power while leaving a manageable finish hole. | Smooth shank 2" 304 stainless steel finish nails. |
| Crown Molding | 34 degree angle improves access in corners and tight installation areas. | 15GA DA angled finish nails with chisel point. |
| Cabinet Work | Provides stronger fastening for cabinet frames, panels, and decorative components. | Smooth shank for clean finish; ring shank for higher hold. |
| Furniture Making | Suitable for frame assembly, decorative strips, and interior wood structures. | 1-1/2" to 2" finish nails depending on material thickness. |
| Door and Window Casing | Angled collation improves maneuverability around narrow openings and corners. | 2" 15 gauge 34 degree DA finish nails. |
| Exterior Trim and Moisture-Prone Areas | 304 stainless steel helps resist corrosion and staining. | 304 stainless steel or 316 stainless steel if higher corrosion resistance is required. |
Smooth shank finish nails are widely used for trim, molding, cabinetry, and general finish carpentry because they drive cleanly and are easier to conceal. Ring shank finish nails provide stronger grip and better back-out resistance, making them useful for softer wood or applications requiring higher holding power.
| Shank Type | Advantage | Best Use |
|---|---|---|
| Smooth Shank | Clean driving, easy finishing, and suitable holding power for most finish work. | Baseboards, crown molding, cabinetry, casing, furniture, and interior decoration. |
| Ring Shank | Higher holding power and better resistance to nail back-out. | Softer wood, exterior trim, furniture frames, and applications requiring stronger grip. |
Stainless steel finish nails are preferred when the project requires corrosion resistance, clean appearance, and reduced staining risk. For natural finish wood, exterior trim, humid environments, pressure-treated lumber, and long-service-life carpentry, stainless steel nails are usually a better choice than ordinary bright finish nails.
| Material / Finish | Corrosion Resistance | Recommended Use |
|---|---|---|
| Bright Steel | Low | Dry indoor trim and temporary finish work. |
| Electro-Galvanized | Basic | General interior carpentry and low-humidity applications. |
| 304 Stainless Steel | High | Natural wood, exterior trim, humid environments, pressure-treated lumber, and stain-sensitive finish work. |
| 316 Stainless Steel | Superior | Coastal, marine, salt-air, and high-corrosion trim applications. |
Before ordering 15 gauge angled finish nails in bulk, buyers should confirm nailer compatibility, nail length, material, shank type, packaging quantity, and target application. The 34 degree DA style is different from some FN-style finish nails, so matching the tool specification is important.
| Buyer Question | What to Confirm |
|---|---|
| Will these nails fit my finish nailer? | Confirm 15 gauge, 34 degree angle, DA-style strip collation, accepted length range, and shank type with the tool manual. |
| Is 2 inch the right length? | Check trim thickness, substrate material, required penetration depth, and whether the nail must be concealed or filled. |
| Should I choose stainless steel? | Choose stainless steel for exterior trim, humid environments, natural finish wood, pressure-treated lumber, and stain-sensitive applications. |
| Smooth shank or ring shank? | Use smooth shank for standard finish work and ring shank when stronger holding power is required. |
| Can KYA support wholesale packaging? | Yes. KYA can support 100 pcs/stick, 4,000 pcs/box, 4 boxes/carton, pallet packing, carton labels, and OEM packaging requirements. |
KYA Fasteners supplies finish nails, brad nails, coil nails, staples, hog rings, pneumatic tools, and industrial fastening solutions for global buyers. We support wholesale orders, custom specifications, stainless steel fastener supply, private label packaging, and export shipment for distributors, contractors, cabinet factories, furniture manufacturers, and OEM customers.
Factory supply: Stable production for wholesale 15 gauge finish nail orders.
Stainless steel options: 304 stainless steel finish nails are available for corrosion-resistant fastening.
Multiple sizes: DA/25 to DA/64 lengths from 1" to 2-1/2" are available.
Tool compatibility support: Help buyers match nails with 15 gauge 34 degree DA-style angled finish nailers.
Custom packaging: Carton label, pallet packing, private label, and export packaging can be customized.
They are used for baseboards, crown molding, door casing, window casing, cabinetry, furniture making, cladding floor boards, floor strips, and decorative trim installation.
Yes. These are 15 gauge 34 degree DA-style angled finish nails. Buyers should confirm the nailer accepts 15 gauge DA angled strip nails and the required nail length before purchase.
Stainless steel finish nails provide higher corrosion resistance and help prevent rust staining. They are preferred for exterior trim, humid environments, pressure-treated lumber, and natural finish wood.
15 gauge finish nails provide stronger holding power than thinner brad nails, making them suitable for heavier trim, baseboards, molding, cabinetry, and finish carpentry projects.
Smooth shank finish nails are suitable for clean general finish work. Ring shank finish nails provide stronger holding power and better back-out resistance in softer wood or higher-load applications.
Standard packaging is 100 pcs/stick, 4,000 pcs/box, and 4 boxes/carton. Pallet quantity varies by nail length, and custom packaging is available for wholesale and OEM orders.
Yes. KYA Fasteners can customize length, shank type, material, packaging, carton label, pallet packing, and private label requirements for distributors and OEM buyers.
