Home / Fasteners / Nails / Joist Hanger Nails / 3.4x35mm 12um Electric Galvanized Paper Collated Joist Hanger Nails

3.4x35mm 12um Electric Galvanized Paper Collated Joist Hanger Nails

Share to:
sharethis sharing button
34 Degree Paper Collated Joist Hanger Nails Used in the hanging of metal hangers, seismic and hurricane ties, anchors and connector straps. 34-degree paper tape collated nail. Head-stamped for ease of identification. Full round head. Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection.
  • 3.4 x 35mm

  • KYA

  • KYA-JHN3435

Head:
Finish:
Degree:
Availability:
Quantity:
Overview
  • 34 Degree Paper Collated Joist Hanger Nails

  • Used in the hanging of metal hangers, seismic and hurricane ties, anchors and connector straps.

  • 34-degree paper tape collated nail.

  • Head-stamped for ease of identification.

  • Full round head.

  • Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection.

  • These nails are manufactured and collated to strict quality standards to ensure optimal performance in any of our varied styles of Metal Connector tools.

Video:

Product Description


Name Joist Hanger Nails 
Diameter  3.33mm(0.131"), 3.4mm(0.134"), 3.76mm(0.148"),  4.10mm(0.161") 
Length  32mm-64mm 
Shank  Smooth, Ring ,Screw
Coating  Yellow, Red, Blue. 
Finishing Zinc Galvanized, Hot DIP Galvanized. Stainless steel 304, Stainless steel 316
Fitting Tools SENCO, BEA, BOSTICH, HITACHI, OMER, PASLODE etc...
OEM Service OEM Service is available if you provide  a drawing or sample.
Samples Samples are free.
Customized Customized is available if you provide a drawing or sample

Joist Hanger Nails

Nails Head

Nails Head

JOIST HANGER NAILS

Nails Shank

Nails Point

Nails Point

Shank Type

Smooth Shank

Smooth shank nails are the most common and are often used for framing and general construction applications. They offer enough holding power for most everyday use.


Ring Shank

Ring shank nails offer superior holding power over smooth shank nails because the wood fills in the crevasse of the rings and also provide friction to help prevent the nail from backing out over time. A ring shank nail is often used in softer types of wood where splitting is not an issue.


Screw Shank

A screw shank nail is generally used in hard woods to prevent the wood from splitting while the fastener is being driven. The fastener spins while being driven (like a screw) which creates a tight groove that makes the fastener less likely to back out.


Annular Thread Shank

Annular thread is very similar to a ring shank except the rings are externally beveled which presses against the wood or sheet rock to prevent the fastener from backing out.

Application

Joist hanger nails are use for the installation of wood connectors. These nails come in 34 degree paper strips which are compatible with most 34 degree paper strip power metal connector nailers.

Galvanized Joist Hanger Nails-4

Finishing

Bright Finish

Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.


Hot Dip Galvanized (HDG)

Hot dip galvanized fasteners are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow. Areas near the coasts where the salt content in rain water is much higher, should consider Stainless Steel fasteners as salt accelerates the deterioration of the galvanization and will accelerate corrosion. 


Electro Galvanized (EG)

Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener. 


Stainless Steel (SS)

Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel. 


Size Dia.(mm) Length(mm)
Head Dia.(mm) Head Thickness(mm) Point(°) Shank
Surface Pcs/Strip Degree(°)
3.4x35
3.36-3.4 35±1 7.2±0.2 1.4±0.1 40±2 Smooth, ring, screw Bright, EG, HDG,MG 25 34±1
3.3x35 3.26-3.3 35±1 7.2±0.2 1.4±0.1 40±2 Smooth, ring, screw Bright, EG, HDG,MG 25 34±1
3.3x38 3.26-3.3 38±1 7.2±0.2 1.4±0.1 40±2 Smooth, ring, screw Bright, EG, HDG,MG 25 34±1
3.76x38 3.71-3.76 38±1 7.2±0.2 1.4±0.1 40±2 Smooth, ring, screw Bright, EG, HDG,MG 25 34±1
3.76x40 3.71-3.76 40±1 7.2±0.2 1.4±0.1 40±2 Smooth, ring, screw Bright, EG, HDG,MG 25 34±1
3.76x50 3.71-3.76 50±1 7.2±0.2 1.4±0.1 40±2 Smooth, ring, screw Bright, EG, HDG,MG 25 34±1
3.76x64 3.71-3.76 64±1 7.2±0.2 1.4±0.1 40±2 Smooth, ring, screw Bright, EG, HDG,MG 25 34±1


Previous: 
Next: 
Apply Our Best Quotation

TOOLS

FASTENERS

FURNITURE ACCESSORIES

OFFICE SUPPLIES

PACKAGING MATERIAL

WIRE

QUICK LINKS

Copyright ©  2024 Changzhou KYA Fasteners Co.,Ltd. All rights reserved.