| Head: | |
|---|---|
| Finish: | |
| Quantity: | |
34 Degree Paper Tape Anchor Nails are heavy-duty joist hanger nails and metal connector nails designed for structural timber connections. With a 34 degree paper tape collation, 4.0mm diameter, 37mm to 75mm length range, Anker head and optional smooth, ring or screw shank, these nails provide reliable fastening performance for joist shoes, joist hangers, pre-drilled panels, truss connections, rafters and engineered wood assemblies.
KYA 34° anchor nails are available in bright finish, electro-galvanized, hot-dip galvanized and stainless steel options. HDG and stainless steel versions are recommended for outdoor timber structures, treated lumber and high-humidity environments where corrosion resistance is required.
These 34 degree paper tape anchor nails are engineered for fastening joist hangers, joist shoes and metal connectors in structural timber construction. The Anker head increases bearing surface and pull-through resistance, while the 4.0mm heavy-duty diameter provides strong fastening performance in timber and connector plates.
34° paper tape collation supports efficient feeding in compatible anchor nailers and framing tools.
4.0mm / 0.16 inch diameter provides heavy-duty strength for structural metal connectors.
37mm to 75mm length range covers common joist hanger, timber connector and framing applications.
Anker head / anchor head helps improve pull-through resistance in connector fastening.
Smooth, ring or screw shank options match different holding power and timber requirements.
Bright, EG, HDG and stainless steel finishes support indoor, protected, outdoor and high-corrosion environments.
2,000 pcs per carton provides efficient bulk supply for contractors, wholesalers and structural fastener distributors.
| Specification | Details |
|---|---|
| Product Name | 34 Degree Paper Tape Anchor Nails |
| Model | 4 x 45mm |
| Brand | KYA |
| Code | KYA-ANCHOR 4X45 |
| Collation Type | Paper Tape |
| Collation Angle | 34 Degree |
| Diameter | 4.0mm / 0.16 inch |
| Length Range | 37mm to 75mm / 1-7/16 inch to 3 inch |
| Featured Length | 45mm |
| Head Type | Anker Head / Anchor Head |
| Shank Type | Smooth / Ring / Screw |
| Finish Options | Bright / Electro-Galvanized / Hot-Dip Galvanized / Stainless Steel |
| Packing | 2,000 pcs per carton |
| Common Tools | Compatible 34 degree paper tape anchor nailers and framing nailers, including Paslode, Hitachi NR75A, Senco GT90 and Max GS683 series tools where specifications match |
| Main Applications | Joist hangers, metal connectors, joist shoes, structural timber framing, pre-drilled panels, truss connections, rafter connections and engineered wood assemblies |
| Collation | Angle | Diameter | Length | Shank Type | Finish | Head Type | Packing |
|---|---|---|---|---|---|---|---|
| Paper Tape | 34° | 4.0mm / 0.16 inch | 37–75mm / 1-7/16 inch–3 inch | Smooth / Ring / Screw | Bright / EG / HDG / SS | Anker / Anchor | 2,000 pcs/ctn |
Smooth shank anchor nails drive quickly and are suitable for standard metal connector fastening and general structural timber applications where normal holding power is sufficient.
Ring shank anchor nails provide stronger withdrawal resistance by gripping wood fibers. They are recommended for high-load timber connections, joist hangers, engineered wood assemblies and outdoor structures where extra holding power is required.
Screw shank anchor nails rotate during driving and create a tighter grip in hard timber. They help reduce back-out and improve fastening stability in demanding structural wood applications.
| Finish | Recommended Use | Benefit |
|---|---|---|
| Bright Finish | Indoor or temporary timber connections where corrosion resistance is not required | Cost-effective uncoated option |
| Electro-Galvanized | Protected construction, indoor timber framing and low-humidity environments | Basic zinc protection with a clean surface finish |
| Hot-Dip Galvanized | Outdoor timber structures, exposed connectors and treated lumber | Thicker zinc coating for long-term outdoor corrosion resistance |
| Stainless Steel | Coastal, high-humidity, chemically treated timber and high-corrosion environments | Best corrosion resistance among listed finish options |
34 Degree Paper Tape Anchor Nails are used in structural timber construction where strong and accurate fastening of metal connectors is required. They are suitable for both factory supply and jobsite installation with compatible 34 degree paper tape nailers.
Joist hangers and joist shoes
Metal connector fastening
Structural timber framing
Pre-drilled panel fastening
Truss and rafter connections
Heavy-duty carpentry
Outdoor timber structures
Engineered wood assemblies
These nails are designed for compatible 34 degree paper tape anchor nailers and framing nailers. Common tool references include Paslode, Hitachi NR75A, Senco GT90 and Max GS683 series tools, provided that the nailer accepts the correct 34° paper tape collation, 4.0mm diameter, Anker head and required nail length.
For protected indoor construction, bright or electro-galvanized nails may be suitable. For outdoor structures, exposed timber connectors or treated lumber, hot-dip galvanized or stainless steel anchor nails are recommended. For high withdrawal resistance in timber, ring shank is usually preferred over smooth shank.
They are used for fastening joist hangers, joist shoes, metal connectors, pre-drilled panels, truss connections, rafter connections and structural timber assemblies.
They are designed for compatible 34 degree paper tape anchor nailers and framing nailers. Tool references include Paslode, Hitachi NR75A, Senco GT90 and Max GS683 series tools where the nail specifications match.
The Anker head provides a larger bearing surface and helps improve pull-through resistance when fastening metal connectors and joist hangers to timber.
Hot-dip galvanized and stainless steel versions are recommended for treated lumber and outdoor timber structures. The final choice should match the timber treatment, exposure level and project corrosion requirements.
Choose smooth shank for standard fastening, ring shank for stronger withdrawal resistance in timber, and screw shank for hard timber or applications that need maximum grip and reduced back-out.
The standard packing is 2,000 pieces per carton. Bulk packing, pallet quantity and OEM labeling can be discussed according to order quantity and destination market.
Yes. KYA can discuss sample support, custom box labels, OEM packaging, finish options, shank type, pallet packing and shipping terms based on your order requirement.
KYA Fasteners supplies nails, staples, screws, hog rings, wire products and fastening tools for global customers. For structural timber construction, KYA provides joist hanger nails, anchor nails, framing nails and related collated fasteners in multiple materials, shank types, finishes and sizes.
Contact KYA to get factory-direct pricing for 34 Degree Paper Tape Anchor Nails, including tool compatibility, technical specifications, finish options, sample availability, packing details, pallet quantity and shipping schedule.
