Home / Fasteners / Nails / Framing Nails / 34 Degree Stainless Steel Paper Collated Joist Hanger Nails

34 Degree Stainless Steel Paper Collated Joist Hanger Nails

Share to:
34 Degree Stainless Steel Paper Collated Joist Hanger Nails
Used in the hanging of metal hangers, seismic and hurricane ties, anchors and connector straps.
34-degree paper tape collated nail.
Head-stamped for ease of identification.
High shear strength, resists forces that make materials faces slide against each other.
These nails are well-suited for resisting storms, strong winds, and hurricanes.
Made of 304 stainless steel making it ideal for severe, harsh and saltwater/marine environments.
304 stainless steel joist hanger nails should only be used with 304 stainless steel joist hangers and framing connectors.
  • 0.131" x 1-1/4"
  • KYA
Head:
Finish:
Degree:
Quantity:
Overview

Joist hanger nails is used to connect joist hangers to the joists or wood studs they will be supporting. Joist hanger nails are short and heavy gauge nails, providing increased holding power without fully penetrating the wood. They have a high shear strength to resist forces that make a material's internal faces slide parallel past each other. Storms, hurricanes, and high winds can cause shear stress in materials. For these reasons, nails are recommended over screws for installing connectors to the decking framework as screws lack the needed shear strength to resist shear stress.


  • 34 Degree Stainless Steel Paper Collated Joist Hanger Nails

  • Used in the hanging of metal hangers, seismic and hurricane ties, anchors and connector straps.

  • 34-degree paper tape collated nail.

  • Head-stamped for ease of identification.

  • High shear strength, resists forces that make materials faces slide against each other.

  • These nails are well-suited for resisting storms, strong winds, and hurricanes.

  • Made of 304 stainless steel making it ideal for severe, harsh and saltwater/marine environments.

  • 304 stainless steel joist hanger nails should only be used with 304 stainless steel joist hangers and framing connectors.

Product Description


Name Joist Hanger Nails 
Diameter  3.33mm(0.121")3.76mm(0.148") 4.10mm(0.161") 
Length  32mm-64mm 
Shank  Smooth, Ring ,Screw
Coating  Yellow, Red, Blue. 
Finishing Zinc Galvanized, Hot DIP Galvanized. Stainless steel 304, Stainless steel 316
Fitting Tools SENCO, BEA, BOSTICH, HITACHI, OMER, PASLODE etc...
OEM Service OEM Service is available if you provide  a drawing or sample.
Samples Samples are free.
Customized Customized is available if you provide a drawing or sample

Stainless Steel Joist hanger nails

Joist hanger nails (1)-1

Joist hanger nails (1)-2

Features


Joist Hanger Nails - 304 Stainless Steel


- High shear strength.

- Resists forces that make materials faces slide against each other.

- Storms, strong winds, and hurricanes can cause this type of shear stress.

- Nails are recommended over screws for this purpose because screws lack the necessary strength to resist shear stress.

- 304 Stainless steel is corrosion-resistant, durable, and suitable for freshwater applications.

Shank Type

Smooth Shank

Smooth shank nails are the most common and are often used for framing and general construction applications. They offer enough holding power for most everyday use.


Ring Shank

Ring shank nails offer superior holding power over smooth shank nails because the wood fills in the crevasse of the rings and also provide friction to help prevent the nail from backing out over time. A ring shank nail is often used in softer types of wood where splitting is not an issue.


Screw Shank

A screw shank nail is generally used in hard woods to prevent the wood from splitting while the fastener is being driven. The fastener spins while being driven (like a screw) which creates a tight groove that makes the fastener less likely to back out.


Annular Thread Shank

Annular thread is very similar to a ring shank except the rings are externally beveled which presses against the wood or sheet rock to prevent the fastener from backing out.

Application

Joist hanger nails are excellent for installing joist hangers, seismic and hurricane ties, foundation anchors, and other metal framing hardware applications.

Galvanized Joist Hanger Nails-4

Finishing

Bright Finish

Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.


Hot Dip Galvanized (HDG)

Hot dip galvanized fasteners are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow. Areas near the coasts where the salt content in rain water is much higher, should consider Stainless Steel fasteners as salt accelerates the deterioration of the galvanization and will accelerate corrosion. 


Electro Galvanized (EG)

Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener. 


Stainless Steel (SS)

Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel. 


Apply Our Best Quotation

TOOLS

FASTENERS

FURNITURE ACCESSORIES

OFFICE SUPPLIES

PACKAGING MATERIAL

WIRE

QUICK LINKS

Copyright © 2021. Changzhou KYA Fasteners Co.,Ltd. All rights reserved.