| Head: | |
|---|---|
| Finish: | |
| Quantity: | |
35 Degree 2 Inch x 0.113" Galvanized Ring Shank Paper Collated Framing Nails are designed for 30–35 degree paper tape collation framing nailers. With a galvanized finish, ring shank design and paper collated strip format, these framing nails provide strong holding power, reliable feeding and efficient fastening for timber framing, wall sheathing, roof sheathing, subflooring, decking, fencing and general construction.
KYA paper collated framing nails are available with clipped head or offset round head, and can be supplied in bright, electro galvanized, hot dip galvanized or stainless steel finishes. The 2 inch x 0.113 inch galvanized ring shank specification is especially suitable for framing applications that need strong withdrawal resistance and smooth nailer performance.
35 degree paper collated framing nails are widely used in pneumatic and cordless framing nailers for professional construction. Paper tape collation helps provide clean firing, consistent feeding and less jobsite debris compared with some plastic collation systems.
30–35 degree nailer compatibility: Designed for paper tape collation framing nailers that accept 30°, 34° or 35° nails.
2 inch x 0.113 inch size: Common framing nail size for structural wood fastening and general construction use.
Ring shank holding power: Ring shank profile grips wood fibers and improves withdrawal resistance.
Galvanized corrosion resistance: Suitable for construction applications where added rust protection is required.
Paper tape collation: Supports reliable feeding and reduced jamming in compatible framing nailers.
Head options: Available with clipped head or offset round head to match tool and code requirements.
| Specification | Details |
|---|---|
| Product Name | 35 Degree 2 Inch x 0.113" Galvanized Ring Shank Paper Collated Framing Nails |
| Model | 2 Inch x 0.113" |
| Brand | KYA |
| Fastener Type | Paper Collated Framing Nails / Paper Tape Framing Nails |
| Degree | 30°, 34°, 35° |
| Diameter Range | 2.8mm to 3.76mm / 0.113" to 0.148" |
| Product Diameter | 0.113" / approximately 2.87mm |
| Length Range | 50mm to 130mm |
| Product Length | 2 inch / approximately 51mm |
| Shank Type | Ring Shank; also available in Smooth and Screw Shank |
| Finishing | Bright, Electro Galvanized (EG), Hot Dip Galvanized (HDG), Stainless Steel (SS) |
| Coating Color | Yellow, Red, Blue |
| Head Type | Clipped Head, Offset Round Head |
| Collation | Paper Tape Collated |
| Compatible Tools | 30–35 Degree Paper Tape Collation Framing Nailers |
| Main Applications | Timber framing, wall sheathing, roof sheathing, subflooring, decking, fencing and general construction |
| Description | Package (PCS/CTN) |
|---|---|
| ⌀2.87 x 51mm, EG (12um) Ring | 3,000 nails |
| ⌀2.87 x 51mm, Bright Smooth | 3,000 nails |
| ⌀2.87 x 51mm, Bright Ring | 3,000 nails |
| ⌀2.87 x 51mm, EG (12um) Smooth | 3,000 nails |
| ⌀2.87 x 63mm, SS304 Ring | 3,000 nails |
| ⌀2.87 x 63mm, HDG Ring | 3,000 nails |
| ⌀2.87 x 63mm, EG (12um) Ring | 3,000 nails |
| ⌀2.87 x 63mm, Bright Smooth | 3,000 nails |
| ⌀2.87 x 63mm, EG (12um) Smooth | 3,000 nails |
| ⌀2.87 x 70mm, EG (12um) Ring | 3,000 nails |
| ⌀2.87 x 70mm, Bright Smooth | 3,000 nails |
| ⌀2.87 x 75mm, EG (12um) Ring | 3,000 nails |
| ⌀2.87 x 75mm, Bright Smooth | 3,000 nails |
| ⌀3.1 x 63mm, Bright Smooth | 2,000 nails |
| ⌀3.1 x 63mm, EG (12um) Ring | 2,000 nails |
| ⌀3.1 x 75mm, EG (12um) Smooth | 2,000 nails |
| ⌀3.1 x 75mm, HDG Ring | 2,000 nails |
| ⌀3.1 x 90mm, EG (12um) Smooth | 2,000 nails |
| ⌀3.1 x 90mm, Bright Ring | 2,000 nails |
| Shank Type | Performance | Recommended Use |
|---|---|---|
| Smooth Shank | Easy driving with standard holding power for general framing tasks. | General framing and construction where maximum pullout resistance is not required. |
| Ring Shank | Rings grip wood fibers and provide superior holding power compared with smooth shank nails. | Framing, sheathing, subflooring, decking and softer wood applications requiring strong hold. |
| Screw Shank | Spins during driving to create a tight groove and enhance holding power. | Hardwood or high-hold applications where back-out resistance is important. |
| Annular Thread Shank | Externally beveled rings provide additional grip and help prevent back-out. | Wood and sheet material applications where enhanced withdrawal resistance is needed. |
35 degree galvanized ring shank paper collated framing nails are used in structural and general construction where strong fastening, efficient nailer feeding and finish compatibility are important. Choose the finish according to exposure level, treated lumber requirements and project specification.
Timber framing for residential and commercial construction
Wall sheathing and roof sheathing
Subfloor and decking installation
Fencing and exterior structures with the appropriate corrosion-resistant finish
General construction with pneumatic or cordless paper tape framing nailers
Treated lumber applications when HDG or stainless steel finish is selected according to project requirements
| Finish | Description | Recommended Use |
|---|---|---|
| Bright Finish | Uncoated fastener surface with no added corrosion protection. | Interior framing where moisture exposure and corrosion risk are low. |
| Electro Galvanized (EG) | Thin zinc layer for limited corrosion protection. | Indoor or protected construction with light humidity exposure. |
| Hot Dip Galvanized (HDG) | Zinc-coated finish for better corrosion resistance than bright or light electro galvanized options. | Exterior structures, decking, fencing and treated lumber applications where HDG is specified. |
| Stainless Steel (SS) | Highest corrosion resistance option, commonly selected for harsh or exposed environments. | Coastal, exterior, high-humidity and corrosion-sensitive construction applications. |
| Selection Point | Available Options | Recommendation |
|---|---|---|
| Nailer Compatibility | 30°, 34° and 35° paper tape collation framing nailers | Confirm your nailer accepts paper collated framing nails, the selected nail angle, head type, diameter and length. |
| Shank Type | Smooth, Ring, Screw | Choose ring shank when stronger pullout resistance is needed for framing, sheathing, subflooring or decking. |
| Finish | Bright, EG, HDG, Stainless Steel | Use galvanized or stainless steel for exterior, treated lumber or corrosion-sensitive projects. |
| Head Type | Clipped Head, Offset Round Head | Match head type to your framing nailer and local building requirements. |
| Packing | 3,000 nails or 2,000 nails per carton depending on size | Choose packing according to project volume, distributor stocking needs and jobsite consumption rate. |
They are used for timber framing, wall sheathing, roof sheathing, subflooring, decking, fencing and general construction. The ring shank design provides stronger holding power than smooth shank nails in many wood applications.
These nails are designed for 30–35 degree paper tape collation framing nailers. Check your nailer specification for nail angle, head type, diameter, length and collation compatibility before ordering.
Ring shank nails grip wood fibers and improve withdrawal resistance. They are a strong choice for framing, sheathing, decking, subflooring and other jobs where secure holding power is important.
Galvanized nails can be used for many outdoor applications when the finish meets project requirements. For harsher environments, coastal areas or corrosion-sensitive projects, stainless steel nails are often preferred.
Paper tape collation supports smooth feeding in compatible framing nailers and helps reduce jamming. It also creates less plastic debris on the jobsite compared with plastic collation systems.
Available finishes include Bright, Electro Galvanized, Hot Dip Galvanized and Stainless Steel. Bright nails are mainly for interior dry use, while HDG and stainless steel are better for exterior or treated lumber applications.
Package quantity depends on nail size. Many 2.87mm diameter options are packed 3,000 nails per carton, while larger 3.1mm options are commonly packed 2,000 nails per carton.
Yes. KYA can discuss samples, nailer compatibility, shank type, finish, head type, diameter, length, coating color, carton packing, bulk quantity and shipping schedule according to your project needs.
KYA Fasteners supplies paper collated framing nails, 35 degree framing nails, galvanized ring shank framing nails, clipped head framing nails, offset round head framing nails, coil nails, roofing nails, pneumatic nailers, staples, hog rings and industrial fastening solutions for global construction and distributor customers.
Contact KYA to get factory-direct pricing for 35 Degree 2 Inch x 0.113" Galvanized Ring Shank Paper Collated Framing Nails, including finish selection, head type, nailer compatibility, samples, carton packing, bulk order quantity and delivery schedule.
