2.8 x 40R
KYA
KYA-2840R
| Availability: | |
|---|---|
| Quantity: | |
KYA 2.8 × 40mm ring shank common nails are loose steel nails designed for professional wood fastening applications where increased resistance to withdrawal is required. The combination of a 40mm length, 2.8mm shank diameter, ringed shank, flat head and diamond point makes this size suitable for pallet production, wooden crates, packaging, carpentry and other timber assemblies where the specified nail dimensions are appropriate.
The ring shank creates additional mechanical engagement with surrounding wood fibers compared with a conventional smooth shank. This helps the nail resist loosening in permanent wood assemblies and makes it a practical option for manufacturers, distributors and professional users purchasing loose nails in bulk.
| Product Type | Loose Common Nail |
| Model | 2.8 × 40R |
| Product Code | KYA-2840R |
| Length | 40mm (approximately 1-9/16") |
| Shank Diameter | 2.8mm (approximately 0.110") |
| Shank Type | Ring Shank |
| Head Type | Flat Head |
| Point Type | Diamond Point |
| Material | Steel |
| Surface Treatment | Galvanized |
| Packaging | 25 kg / carton |
| Listed Standards | ASTM F1667/F1667M is listed for nails; ASTM A153/A153M applies to qualifying hot-dip galvanized coatings. Confirm the applicable edition, coating class, scope and documents for the ordered finish. |
The 2.8 × 40mm configuration provides a compact loose nail for timber assemblies where a shorter nail length and enhanced shank grip are required. Buyers can use model 2.8 × 40R or product code KYA-2840R when requesting quotations or confirming specifications.
Annular rings are formed around the nail shank to increase mechanical engagement between the fastener and surrounding wood fibers. Compared with a comparable smooth shank design, this construction helps improve resistance to withdrawal and loosening.
The flat head provides a broad bearing surface against the material being fastened. This helps distribute holding force over the contact area and provides secure seating in suitable wood fastening applications.
The diamond-shaped point provides a conventional penetrating profile for driving into timber and wood products. Proper nail size and installation method should be selected according to the wood species, material thickness and assembly requirements.
The galvanized surface provides additional corrosion protection compared with untreated bright steel. The appropriate nail finish should always be selected according to the intended environment, timber type and project requirements.
These are loose common nails rather than collated fasteners. The loose format is suitable for manual fastening operations, industrial packing requirements and distribution channels that require bulk common nails.
The 40mm length and 2.8mm ring shank make this product suitable for a range of timber fastening applications where these dimensions meet the assembly requirements.
Wood pallet manufacturing and repair
Wooden crates and export packaging
Wooden boxes and packaging assemblies
Timber panels and wood components
General carpentry and woodworking
Light wood assembly applications
Other timber fastening work requiring 40mm ring shank nails
For load-critical, structural or regulated applications, the nail size, material, coating and installation requirements should be confirmed against the applicable project specification before ordering.
| Feature | Ring Shank | Smooth Shank |
|---|---|---|
| Shank Profile | Annular rings around the shank | Straight smooth surface |
| Withdrawal Resistance | Designed to provide increased resistance to pull-out | Suitable for general fastening where enhanced shank grip is not required |
| Typical Selection | Permanent wood assemblies, pallets, crates and similar applications | General construction, carpentry and woodworking |
| Product on This Page | 2.8 × 40mm Ring Shank | Not applicable |
KYA's common nail range lists bright, galvanized, polished and vinyl-coated surface treatments. Buyers should specify the required surface treatment together with the nail dimensions and application when requesting a quotation.
| Surface Treatment | Description |
|---|---|
| Galvanized | Zinc-coated surface for additional corrosion protection compared with untreated steel. |
| Bright | Uncoated steel finish commonly selected for suitable dry interior applications. |
| Polished | Processed steel surface available within the common nail product range. |
| Vinyl Coated | Coated option available within the common nail range for specified fastening requirements. |
Finish selection should be based on the installation environment, timber treatment, exposure conditions and applicable project requirements. Contact KYA to confirm the appropriate available option before placing a bulk order.
The product listing identifies ASTM F1667/F1667M for nails. ASTM A153/A153M addresses zinc coating on iron and steel hardware and applies only when the ordered finish and product scope qualify. Confirm the applicable edition, coating class and supporting documents with KYA before ordering.
For accurate product matching and quotation, professional buyers should provide the required nail size, shank type, surface treatment, packaging requirements, purchasing quantity and destination.
For the product shown on this page, specify 2.8 × 40R or product code KYA-2840R. This helps distinguish the 40mm ring shank version from other common nail dimensions and shank configurations.
| Size to Specify | 2.8 × 40mm |
| Shank to Specify | Ring Shank |
| Product Reference | KYA-2840R |
| Finish | Specify required surface treatment |
| Packaging | 25 kg / carton |
| Additional Information | Order quantity, destination and any project-specific requirements |
The source listing states that common nail sizes from 25–150mm are stocked and lists bright, electro-galvanized, hot-dip galvanized and stainless steel options across the range. Availability and finish options vary by size; confirm current stock and the exact finish for 2.8 × 40R before ordering.
The listing offers a 5kg sample box, with freight paid by the recipient. Confirm sample availability, shipping destination and current freight arrangements with KYA.
The listed minimum order is one pallet (approximately 800–1,000kg) or one 20ft container. Confirm the current minimum for the required size, finish and destination before placing an order.
The source listing states up to 250% greater withdrawal resistance for ring shank nails versus smooth shank nails. Actual performance depends on nail dimensions, wood species, moisture, installation and test method; request supporting test data for project specifications.
The nominal nail length is 40mm, approximately 1-9/16 inch, with a nominal shank diameter of 2.8mm, approximately 0.110 inch. The model designation is 2.8 × 40R.
The annular rings around the nail body engage with surrounding wood fibers after installation. This design helps increase resistance to withdrawal compared with a comparable smooth shank nail.
This product is supplied as loose common nails. It is not a wire coil, plastic collated or paper collated nail product.
Typical applications include wooden pallets, crates, packaging assemblies, timber components, carpentry and general wood fastening where a 40mm × 2.8mm ring shank nail meets the assembly requirements.
The KYA common nail range lists bright, galvanized, polished and vinyl-coated surface treatment options. Confirm the required finish for the specific nail size when requesting a quotation.
The current product specification lists 25 kg per carton. Buyers with specific distribution, labeling or packing requirements should include those requirements when contacting KYA.
The listing identifies ASTM F1667/F1667M for nails; ASTM A153/A153M applies only to qualifying hot-dip galvanized coating. Confirm the applicable edition, coating class, product scope and supporting documents before ordering.
Provide the required nail dimensions, shank type, surface treatment, packaging requirements, order quantity and delivery destination. For this product, reference model 2.8 × 40R or code KYA-2840R.
FURNITURE ACCESSORIES
OFFICE SUPPLIES
PACKAGING MATERIAL