The PA1310-S Pneumatic Stapler Gun is an air stapler designed for plastic repair, composite manufacturing, boatbuilding, fiberglass lay-up, lumber wrap, tagging, house wrap installation, cable fixing, and furniture repair. It drives 1310S polymer composite staples from 6mm to 10mm, providing a lightweight and efficient fastening solution for applications where non-metallic composite staples are required.
With a 1.0kg lightweight body, hardened one-piece piston, anti-abrasive materials, optional trigger or contact trip safety, and standard or long magazine options, the PA1310-S is suitable for industrial users, composite factories, boatbuilding workshops, repair operations, and distributors sourcing pneumatic staplers for polymer composite staples.
The PA1310-S pneumatic stapler is designed for 1310S polymer composite staples with a 12.8mm crown and 6mm–10mm leg length. It operates at 60–100 psi and is built for stable fastening in plastic repair, fiberglass, composite, packaging, and industrial tagging applications.
| Attribute | Details |
|---|---|
| Model | PA1310-S Pneumatic Stapler Gun |
| Tool Type | Air Stapler / Pneumatic Stapler Gun |
| Dimensions | 345mm x 310mm x 265mm / 13-9/16" x 12-3/16" x 10-7/16" |
| Weight | 1.0kg / 2.2 lbs |
| Operating Pressure | 60–100 psi / 4–7 bar |
| Load Capacity | 50 staples |
| Staple Type | Polymer Composite Staples 1310S |
| Staple Crown | 12.8mm / 1/2" |
| Staple Shank Diameter | 1.25mm x 1.05mm / 0.050" x 0.040" |
| Staple Length | 6mm–10mm / 1/4"–3/8" |
The PA1310-S is designed for 1310S polymer composite staples. These staples are commonly used where non-metallic fastening is preferred, including plastic repair, composite lay-up, fiberglass work, tagging, and applications where metal detection, corrosion, or surface marking may be a concern.
| Staple Parameter | Compatible Specification |
|---|---|
| Staple Series | 1310S polymer composite staples |
| Crown | 12.8mm / 1/2" |
| Shank Diameter | 1.25mm x 1.05mm / 0.050" x 0.040" |
| Leg Length | 6mm–10mm / 1/4"–3/8" |
| Magazine Capacity | 50 staples |
| Typical Use | Plastic repair, composites, fiberglass, boatbuilding, lumber wrap, tagging, house wrap, cable and wire installation |
The PA1310-S pneumatic stapler is designed for fast, stable, and accurate fastening with polymer composite staples. Its lightweight structure and durable internal components make it suitable for repeated industrial use.
Lightweight 1.0kg body for easy handling and reduced operator fatigue.
Well-balanced tool structure for precise fastening in repair and production work.
Hardened one-piece piston for strong driving power and durable performance.
Designed for 1310S polymer composite staples.
Fast operation for high work efficiency in industrial applications.
Anti-abrasive materials help extend tool service life.
Standard or long magazine options are available for less reloading.
Trigger safety or contact trip safety options help reduce accidental firing risk.
PA1310-S is suitable for industrial users who need polymer composite staples instead of traditional metal staples. It is widely used in plastic repair, composite production, marine manufacturing, packaging, insulation, house wrap, tagging, and cable fixing applications.
Plastic repair and plastic component fastening.
Boatbuilding and fiberglass lay-up.
Composite manufacturing and temporary composite fixation.
Lumber wrap and product tagging.
Radiant barrier and house wrap installation.
Casket lining and casegoods tagging.
Cable and wire installation.
Furniture repair and light industrial fastening.
Polymer composite staples are useful in plastic repair, composite manufacturing, and fiberglass work because they reduce the risk of rust, corrosion staining, and unwanted metal contact. For applications where surface protection, corrosion resistance, or non-metallic fastening is important, 1310S composite staples provide a practical fastening option.
| Requirement | Benefit of Polymer Composite Staples |
|---|---|
| Plastic Repair | Helps fasten repaired plastic parts without using metal staples. |
| Fiberglass and Composite Lay-Up | Supports temporary or permanent fastening in composite material production. |
| Marine and Boatbuilding Work | Reduces concerns related to corrosion staining from metal fasteners. |
| Tagging and Packaging | Provides lightweight fastening for labels, wraps, and casegoods tagging. |
Before ordering the PA1310-S pneumatic stapler, buyers should confirm staple series, staple length, operating pressure, safety mechanism, magazine requirement, and application material. This helps ensure stable feeding, accurate fastening, and longer tool service life.
| Selection Factor | Recommendation |
|---|---|
| Staple Compatibility | Use 1310S polymer composite staples with 12.8mm crown and 6mm–10mm leg length. |
| Air Pressure | Operate within 60–100 psi / 4–7 bar for stable performance. |
| Safety Type | Choose trigger safety or contact trip safety according to work process and operator preference. |
| Magazine Option | Select standard or long magazine depending on production speed and reloading frequency. |
| Application | Confirm whether the tool will be used for plastic repair, fiberglass, composites, tagging, cable fixing, or house wrap. |
KYA Fasteners supplies pneumatic staplers, composite staples, plastic staples, industrial fasteners, nails, staples, and fastening tools for global distributors, repair workshops, composite manufacturers, packaging users, and industrial buyers. The PA1310-S can be supplied together with compatible 1310S polymer composite staples for matched fastening system sourcing.
Pneumatic stapler designed for 1310S polymer composite staples.
Suitable for plastic repair, boatbuilding, fiberglass, composites, tagging, and cable installation.
Lightweight 1.0kg tool body for easier operation.
Industrial design with anti-abrasive materials and one-piece piston.
Support for bulk orders, staple compatibility, and matched tool supply.
One-stop supply of pneumatic staplers and polymer composite staples.
The PA1310-S pneumatic stapler is used for fastening 1310S polymer composite staples in plastic repair, boatbuilding, fiberglass lay-up, composite manufacturing, lumber wrap, tagging, house wrap, casket lining, casegoods tagging, cable installation, and furniture repair.
The PA1310-S uses 1310S polymer composite staples with a 12.8mm / 1/2" crown, 1.25mm x 1.05mm shank diameter, and 6mm–10mm / 1/4"–3/8" leg length.
The PA1310-S operates at 60–100 psi, equal to 4–7 bar. A clean and stable compressed air supply is recommended for consistent stapling performance.
The PA1310-S holds up to 50 staples. Standard and long magazine options are available depending on reloading frequency and production requirements.
Yes. The PA1310-S is suitable for plastic repair because it drives polymer composite staples instead of standard metal staples, making it useful for plastic and composite repair operations.
The PA1310-S can be supplied with trigger safety or contact trip safety. These options help reduce accidental firing risk and support different working methods.
Yes. The PA1310-S uses anti-abrasive materials and a hardened one-piece piston to support durability and stable performance in demanding industrial applications.
Bulk buyers include pneumatic tool distributors, composite manufacturers, plastic repair workshops, boatbuilding factories, packaging suppliers, furniture repair companies, and industrial fastening product wholesalers.
