1-1/4 In. x 0.120 In.
KYA
KYA-3.05X32SSR
| Availability: | |
|---|---|
| Quantity: | |
KYA 1-1/4" × .120" stainless steel roofing coil nails are 15-degree wire-collated fasteners with a 32mm length, 3.05mm shank diameter and ring-shank profile. The featured product is identified by KYA as KYA-3.05X32SSR.
The ring shank provides additional mechanical engagement in suitable wood substrates, while stainless steel is selected where the project requires higher corrosion resistance than conventional carbon-steel roofing nails.
KYA currently lists both #304 and #316 stainless steel ring-shank configurations within this roofing nail range. The required stainless grade should be specified when ordering because #304 and #316 are different materials and should not be treated as interchangeable for every exposure environment.
| Product Type | Stainless Steel Roofing Coil Nail |
| Model | 1-1/4" × .120" |
| KYA Code | KYA-3.05X32SSR |
| Nail Length | 1-1/4" / 32mm |
| Shank Diameter | .120" / approximately 3.05mm |
| Shank Type | Ring Shank |
| Material | Stainless Steel |
| KYA Listed Stainless Options | #304 / #316 Stainless Steel |
| Collation | 15° Wire-Collated Coil |
| Nails per Coil | 120 pcs according to the current KYA roofing coil nail range |
| Listed Stainless Ring Packing | 3,600 pcs for the 1-1/4" stainless ring-shank configuration; confirm final carton packing when ordering |
| Head Diameter | Not stated on the current exact product page; confirm for cross-brand nailer compatibility |
| Point Type | Confirm exact production specification if required |
| Primary Use | Roofing applications requiring a .120" stainless steel ring-shank coil nail |
This KYA roofing nail combines the common .120" roofing-nail shank diameter with a 1-1/4" length and ring-shank profile. The nails are wire welded into coils for use in compatible pneumatic roofing nailers.
The featured nail is 32mm / 1-1/4" long. The correct nail length depends on the roofing material, substrate thickness and penetration requirement specified by the roofing system manufacturer or project documents.
The .120" shank diameter is widely used in pneumatic roofing coil nail systems. Tool selection should still be based on the complete nail specification rather than diameter alone.
The annular ring profile provides additional mechanical engagement with suitable wood substrates compared with a smooth shank of the same dimensions.
Final withdrawal performance depends on ring geometry, wood species, wood density, moisture condition, penetration depth and the complete roofing assembly. Ring shank should therefore be specified as part of the complete fastening system rather than as a universal substitute for a smooth roofing nail.
Stainless steel roofing nails are selected for projects requiring higher corrosion resistance than conventional carbon-steel fasteners. KYA currently lists #304 and #316 stainless ring-shank options in this size range.
Specify the required stainless grade when ordering. Material selection should consider moisture, salt exposure, roofing material, treated wood and other materials that will contact the fastener.
The nails are assembled into a wire-welded coil for high-capacity pneumatic roofing nailers. The tool must accept the .120" shank diameter, 1-1/4" length, head diameter and corresponding wire-coil geometry.
KYA's current roofing coil nail range lists 120 nails per coil for the 3.05×32mm size. The current stainless ring-shank table lists 3,600 pieces for this configuration, so carton quantity should be confirmed when placing an order.
KYA lists both #304 and #316 stainless steel ring-shank roofing nails in the 1-1/4" × .120" size. Buyers should identify the required material grade in the purchase specification.
| Material | General Selection Guidance |
|---|---|
| #304 Stainless Steel | Common stainless fastener material for exterior applications where stainless steel is specified and the exposure conditions are suitable for #304. |
| #316 Stainless Steel | Often selected where the project requires a higher level of corrosion resistance, particularly in more aggressive environments. |
The correct stainless grade should follow the roofing manufacturer, project specification, building requirements and expected exposure environment. Do not substitute one stainless grade for another solely because both are described as stainless steel.
These nails are intended for roofing and related exterior fastening applications where the roofing system permits a 1-1/4" × .120" stainless steel ring-shank coil nail.
Asphalt roofing shingles where stainless ring-shank nails are permitted
Fiberglass shingles where the roofing manufacturer permits this fastener specification
Roofing felt and underlayment systems requiring coil roofing nails
Insulation board fastening where .120" roofing nails are specified
Metal drip-edge attachment where permitted by the roofing system
Exterior roofing work where stainless steel fasteners are required
Selected siding applications where the siding manufacturer specifies compatible roofing-style coil nails
Do not use the product as a generic framing, decking or structural nail solely because it is stainless steel. Roofing coil nails have their own head geometry, shank dimensions and intended fastening systems.
Stainless steel is commonly considered when roofing fasteners will be exposed to moisture or environments where conventional galvanized steel may not provide the required corrosion resistance.
For coastal, salt-air or chemically aggressive environments, specify the exact stainless grade required by the roofing system or project. Do not assume that every stainless steel grade provides the same corrosion performance.
| Fastener Material / Finish | General Selection Guidance |
|---|---|
| Electro-Galvanized Steel | Thin zinc-coated steel option. Select only where the roofing system and exposure conditions permit this coating. |
| Hot-Dip Galvanized Steel | Uses a heavier galvanized coating than typical electro-galvanized fasteners. Exact coating requirements should be verified for the project. |
| #304 Stainless Steel | Stainless option for projects where #304 is permitted by the roofing or construction specification. |
| #316 Stainless Steel | Higher-alloy stainless option where more demanding corrosion resistance is specified. |
The featured KYA product is a stainless steel configuration. Electro-galvanized and hot-dip galvanized products are separate roofing nail configurations and should not be presented as finishes of the same exact SKU.
A 15-degree roofing nailer must match more than the nominal coil angle. Length, shank diameter, head diameter, wire collation and coil geometry all affect compatibility.
| Reference Nailer | Published Fastener Range | KYA 1-1/4" × .120" Ring Nail |
|---|---|---|
| MAX CN445R3 | 15° wire coil, .120" shank, 3/4"–1-3/4", smooth or ring shank | Length, shank diameter, ring profile and collation are within published range; confirm KYA head diameter before use. |
| Metabo HPT NV45AB2 | Wire-collated roofing nails, .120" diameter, 7/8"–1-3/4", published as 16° magazine angle | Length and diameter are within published range; verify head diameter and collation geometry before substitution. |
| SENCO RoofPro 445XP | 15° wire coil, .120", 3/4"–1-3/4" | Dimensions fall within the general tool range, but SENCO's current listed compatible roofing fasteners are smooth-shank; confirm ring-shank compatibility before use. |
| Other Roofing Coil Nailers | Varies by model | Must accept 1-1/4" length, .120" shank, ring profile, wire coil and the exact KYA head diameter. |
The strongest current dimensional reference is the MAX CN445R3 because MAX explicitly publishes both smooth and ring-shank .120" roofing nails from 3/4" through 1-3/4". Final compatibility still requires the KYA head diameter to fall within the tool specification.
Roofing nails use a comparatively wide head to hold roofing materials against the substrate. Head diameter also affects whether the nail feeds correctly through a roofing nailer's magazine and nose assembly.
The current KYA exact product page does not publish the head diameter for KYA-3.05X32SSR. Buyers replacing another brand should provide the existing nail drawing, head measurement or nailer model so this dimension can be checked before ordering.
As an industry reference, comparable 1-1/4" × .120" stainless ring-shank roofing nails can use a head around .375", while some roofing nailers publish other maximum or required head dimensions. Do not assume that a competitor's head dimension is automatically the KYA dimension.
| Feature | Ring Shank | Smooth Shank |
|---|---|---|
| Shank Geometry | Annular rings around the shank | Straight cylindrical shank |
| Featured SKU | KYA-3.05X32SSR | Separate configuration |
| Wood Engagement | Provides additional mechanical engagement with suitable wood fibers | Conventional roofing nail profile with lower insertion resistance |
| Selection | Use where the roofing or construction system permits or requires ring-shank nails | Use where smooth-shank roofing nails are specified |
For professional purchasing, specify the complete fastener rather than simply requesting "stainless roofing nails."
| Length | 1-1/4" / 32mm |
| Shank Diameter | .120" / 3.05mm |
| Shank | Ring Shank |
| Material | Specify #304 or #316 Stainless Steel |
| Collation | 15° Wire Coil |
| Head Diameter | Confirm against the nailer and project specification |
| Point | Confirm when required by the purchasing specification |
| Packaging | Confirm coils per carton; KYA currently lists 3,600 pcs for the stainless ring configuration |
| Tool | Provide exact roofing nailer manufacturer and model |
For accurate quotation and compatibility checking, provide the required stainless grade, quantity, roofing nailer manufacturer and model, roofing material, substrate, exposure environment and delivery destination.
For the exact product shown on this page, reference KYA-3.05X32SSR, 1-1/4" × .120", stainless steel, ring shank and 15-degree wire-coil collation.
| KYA Code | KYA-3.05X32SSR |
| Size | 1-1/4" × .120" / 32 × 3.05mm |
| Shank | Ring Shank |
| Material | Stainless Steel; specify #304 or #316 |
| Collation | 15° Wire-Collated Coil |
| Nails per Coil | 120 pcs according to current KYA roofing coil range |
| Current Listed Stainless Ring Quantity | 3,600 pcs; confirm final carton configuration when ordering |
| Required Compatibility Information | Nailer model, head diameter requirement, wire-coil geometry and nail length range |
| Application Information | Roofing material, substrate, exposure environment and required stainless grade |
The nail is 1-1/4" / 32mm long with a .120" / approximately 3.05mm shank diameter.
The featured stainless steel configuration uses a ring shank.
KYA currently lists both #304 and #316 stainless steel ring-shank options in the 1-1/4" × .120" size. Specify the required grade when requesting a quotation.
KYA's current roofing coil nail range lists 120 nails per coil for the 3.05×32mm size.
The current KYA exact product table lists 3,600 pieces for the 1-1/4" #304 and #316 stainless ring-shank configurations. Confirm the final coils-per-carton arrangement when ordering.
No. A roofing coil typically contains a much smaller number of nails. KYA's current roofing coil range lists 120 nails per coil. Quantities such as 3,600 or 7,200 refer to larger package or carton quantities rather than one individual coil.
The MAX CN445R3 accepts 15-degree wire-collated .120" roofing nails from 3/4" to 1-3/4" and its published fastener specification includes both smooth and ring shanks. The KYA nail therefore falls within the published length, diameter and shank ranges. Confirm the KYA head diameter before use.
The NV45AB2 accepts .120" wire-collated roofing nails from 7/8" to 1-3/4", so the KYA nail falls within its published length and diameter range. Confirm the exact head and coil geometry before substitution.
The RoofPro 445XP accepts .120", 15-degree wire-coil roofing nails from 3/4" to 1-3/4". SENCO's currently listed compatible roofing fasteners are smooth-shank models, so ring-shank compatibility should be confirmed before using this KYA nail.
No. The nailer must accept the 1-1/4" length, .120" diameter, ring shank, wire collation and exact head and coil geometry.
The current KYA exact product page does not publish the head diameter for KYA-3.05X32SSR. Confirm this dimension when cross-referencing the nail with another manufacturer's roofing nailer.
Stainless steel is commonly considered for more corrosive exterior environments, but the required stainless grade should follow the roofing manufacturer and project specification. Specify #304 or #316 according to the actual exposure requirements.
Use the stainless grade required by the treated-lumber manufacturer and project specification. Different preservative systems can have different fastener requirements.
They can be used where the shingle manufacturer and applicable roofing specification permit a 1-1/4" × .120" stainless ring-shank roofing nail.
This product is designed as a roofing coil nail. Do not substitute it for a framing or decking fastener unless the relevant assembly specifically permits this nail size, head geometry, shank and material.
No. Reliable feeding depends on the complete fastener dimensions, weld quality, coil geometry, nailer condition, loading and maintenance. Collation angle alone cannot guarantee jam-free operation.
Provide the required quantity, #304 or #316 stainless grade, roofing nailer manufacturer and model, roofing material, substrate, exposure conditions and delivery destination. Reference KYA-3.05X32SSR for the featured size.
FURNITURE ACCESSORIES
OFFICE SUPPLIES
PACKAGING MATERIAL