KYA Fasteners supplies concrete nails and direct-fastening pins for professional construction, interior installation and industrial fastening applications. The product range includes 14 gauge concrete T-nails, 15 gauge concrete finish nails, 12 gauge collated concrete pins, high-pressure concrete coil nails, wire-collated nails and powder-actuated drive pins.
These fasteners are used with different pneumatic, battery-powered, high-pressure and powder-actuated systems. Choosing the correct concrete nail requires checking the base material, fastening tool, nail dimensions, collation type and installation requirements. Products from different fastening systems should not be treated as interchangeable.
Concrete nails are hardened fasteners designed for installation into suitable concrete, masonry or other specified base materials. Depending on their construction, they may be supplied as loose pins, straight collated strips or collated coils for use with dedicated fastening equipment.
Compared with conventional woodworking nails, concrete fastening nails are designed for harder receiving materials and use specialized shank, point and head configurations. Their installation performance depends on substrate strength, fastener geometry, tool energy and the attached material.
Not every concrete nail is suitable for steel or all grades of concrete. Confirm the approved or specified base material and fastening method before installation.

KYA offers several concrete nail families for different fastening tools and applications. The main differences include nail gauge, head configuration, shank diameter, collation format and driving system.
| Concrete Nail Series | Typical Format | Reference Tool System | Selection Consideration |
|---|---|---|---|
| 14GA ST Concrete T-Nails | Glue-collated straight strips | 14GA pneumatic concrete T-nailers | Confirm T-head profile, shank cross-section and accepted length. |
| 15GA FST Concrete Finish Nails | Glue-collated straight strips | 15GA hardened concrete finish nailers | Confirm finish-nail head dimensions and magazine compatibility. |
| 12GA B3/B4 Concrete Pins | Collated pin strips | Compatible battery direct-fastening systems | Confirm exact tool generation, pin geometry and collation. |
| CP-C Concrete Coil Nails | Plastic-collated coils | Compatible high-pressure concrete nailers | Confirm coil capacity, pressure system and pin dimensions. |
| Wire-Collated Concrete Nails | Wire-collated fasteners | Specified concrete nailer systems | Check wire collation, magazine type and nail diameter. |
| Powder-Actuated Drive Pins | Individual pins or system-specific fastener arrangements | Compatible powder-actuated tools | Check tool, pin, power-load and substrate requirements. |
The series descriptions above are intended to help identify a suitable product family. Final selection must follow the exact tool manual and the technical requirements of the fastening application.
The KYA range includes concrete nails in 12, 14 and 15 gauge, together with other drive-pin sizes identified by actual shank diameter and length. The following products illustrate the main configurations available in this category.
| KYA Product | Gauge / Diameter | Length | Collation / Packaging |
|---|---|---|---|
| ST25 Concrete T-Nails | 14GA / approximately 2.1mm | 25mm / 1" | 40 nails/strip; 1,000 nails/box |
| ST38 Concrete T-Nails | 14GA / approximately 2.1mm | 38mm / 1-1/2" | 40 nails/strip; 1,000 nails/box |
| FST32 Concrete Finish Nails | 15GA / 1.8mm | 32mm / 1-1/4" | 50 nails/strip; 1,500 nails/box |
| SD19 B3-Type Concrete Pins | 12GA / 3.0mm nominal | 19mm / 3/4" | 10 pins/strip; 1,000 pins/box |
| B4-Type Concrete Pins | 12GA series / approximately 2.8–3.0mm | 25mm / 1" | 10 pins/strip; 1,000 pins/box |
| CP-C852W7 Concrete Coil Nails | Approximately 0.150" shank | 50mm / 2" | 50 pins/coil; 1,000 pins/case |
| 45# Steel Wire-Collated Nails | 3.4mm | 38mm | Wire collated; confirm pack quantity |
| Powder-Actuated Drive Pins | 0.145" / 3.7mm reference shank | 19–75mm series | 100 pins/box for listed configuration |
These values describe the referenced products and series. They do not establish universal compatibility or confirm that every size is available in every finish. Verify the required item specifications before ordering.
Request Concrete Nails Wholesale Pricing
Concrete nails use different head, point and collation designs to suit specific fastening equipment. T-head concrete nails, concrete finish nails, collated drive pins and coil nails have different feeding and driving requirements.

ST and FST concrete nails are commonly supplied in glue-collated straight strips. The strip format supports sequential feeding in a compatible pneumatic concrete nailer. Head profile, shank cross-section and strip geometry must match the tool magazine.
B3-type and B4-type concrete pins are designed for corresponding battery direct-fastening platforms. The correct tool generation and fastener dimensions must be checked before using replacement pins. A similar-looking strip or identical nominal gauge does not guarantee compatibility.
Plastic-collated concrete coils and wire-collated concrete nails are intended for suitable magazine-fed equipment. The CP-C852W7 is a plastic-collated example for a compatible high-pressure concrete nailer system. Its feeding format is different from straight-strip ST, FST and B3/B4 pins.
Powder-actuated pins are used with dedicated powder-driven fastening tools. Tool type, drive-pin geometry, power load and base-material characteristics must be evaluated together. Operators must be trained and follow the applicable tool instructions and site safety requirements.
Concrete nail selection starts with the base material and the attachment being fastened. Concrete compressive strength, thickness, aggregate characteristics and the condition of the receiving surface can affect the success of direct fastening. Steel fastening has separate requirements for material strength, thickness and penetration.
| Selection Factor | What to Verify | Why It Matters |
|---|---|---|
| Base Material | Concrete, masonry or steel; strength and condition | Determines whether the fastening system is suitable. |
| Fastening Tool | Exact manufacturer, model and generation | Determines the accepted fastener and driving method. |
| Nail Dimensions | Length, diameter, head and point configuration | Affects feeding, penetration and fastening performance. |
| Attachment Thickness | Thickness and type of material being attached | Influences the required fastener length and installation geometry. |
| Embedment and Edge Distance | Project requirements and fastening-system limits | Helps prevent unsuitable installation near edges or in thin substrates. |
| Finish and Environment | Surface coating and expected exposure | Determines whether the specified corrosion protection is adequate. |
For structural or safety-critical connections, use the fastening system and engineering requirements approved for the application. Direct-fastening nails should not be substituted for mechanical anchors, adhesive anchors or structural bolts without an appropriate design review.
Depending on the selected nail and installation system, concrete fasteners are used for attaching appropriate components to concrete, masonry or steel in commercial and industrial construction.

Attaching drywall tracks and suitable light-gauge metal components
Fixing wood furring strips and selected wooden profiles to concrete
Installing compatible trim and finishing components on masonry
Fastening clips, brackets and other specified lightweight components
Temporary formwork and selected construction assemblies
Concrete and steel fastening applications using suitable powder-actuated systems
Not all concrete nail products are suitable for every application listed above. Selection depends on the specific fastener, tool, attached component and receiving material.
KYA concrete nail products include hardened carbon steel fasteners and other steel configurations with surface treatments such as galvanized, mechanically galvanized, zinc-plated or phosphated finishes on selected items. Material and finish availability depend on the individual product.
A galvanized description alone does not establish suitability for exposed, wet or aggressive environments. Buyers should confirm the coating specification and installation conditions when corrosion protection is important.
Packaging also varies by fastening system. Examples in the KYA product range include 1,000-piece boxes for selected ST nails, 1,500-piece boxes for FST32, collated B3/B4 strips and 50-pin coils for CP-C852W7. Confirm the final packaging arrangement for the specific item when requesting a quotation.
KYA Fasteners supplies concrete fastening products for construction fastener distributors, industrial suppliers, building material importers, tool distributors and professional contractors. For repeat purchasing, identifying the fastening system is as important as specifying the nail size.
Concrete nail series or existing product reference
Fastening tool manufacturer, model and generation
Nail length, diameter, head design and collation format
Receiving material and intended fastening application
Required steel material and surface finish
Packaging format and purchasing quantity
Destination country and any applicable technical requirements
Provide a technical drawing or the existing fastener's exact dimensions when comparing replacement products. This is particularly important for concrete nailer magazines and direct-fastening systems that use proprietary fastener geometry.
Request a Bulk Concrete Nails Quote
Concrete nails are used to fasten selected materials, such as drywall track, furring strips, trim and compatible lightweight components, to suitable concrete, masonry or steel using the specified fastening system.
KYA lists 14GA ST concrete T-nails, 15GA FST concrete finish nails, 12GA B3/B4-type collated pins, concrete coil nails, wire-collated concrete nails and powder-actuated drive pins.
ST concrete nails are T-head fasteners intended for compatible 14GA concrete T-nailers. FST concrete finish nails are generally 15GA hardened fasteners with a different head and shank profile. Their magazine requirements differ, so they should not be interchanged without tool verification.
No automatic interchangeability should be assumed. Confirm the battery nailer's exact model and generation, magazine design, pin geometry and accepted fastener series before using B3-type or B4-type replacement pins.
Some direct-fastening pins are designed for specified concrete and steel applications, while others are intended for concrete or masonry only. Always check the fastener's base-material designation and the tool manufacturer's installation instructions.
Select the nail length according to the attachment thickness, required embedment, base material and fastening system. The tool and fastener instructions should determine the final installation dimensions.
Concrete coil nails are collated in coils for compatible magazine-fed tools, while straight-strip nails are assembled in strips for other nailer designs. Their feeding mechanisms and accepted fastener dimensions can be different.
Outdoor suitability depends on the coating specification, environmental exposure and application requirements. A galvanized finish does not automatically establish suitability for prolonged moisture exposure or highly corrosive conditions.
Powder-actuated equipment must be used by trained operators following the tool manual, applicable regulations, personal protective equipment requirements and site procedures. Fastener and power-load selection must match the approved installation conditions.
Provide the required nail series, tool model, length, diameter, head type, collation, finish, packaging quantity and destination market. Include the intended substrate and fastening application to assist product selection.
KYA Fasteners supplies industrial nails, collated fasteners, fastening tools and related products for construction and professional distribution. Its concrete nail category covers multiple tool-specific fastening systems, including pneumatic concrete nails, battery direct-fastening pins, high-pressure concrete coils and powder-actuated fasteners.
Contact KYA Fasteners with your required fastener dimensions, compatible tool model and purchasing specifications to discuss suitable concrete nail products.
Contact KYA for Concrete Nails
KYA concrete nails cover fasteners used to attach selected materials to concrete, masonry or steel. The product range includes collated nails for compatible nailers and powder-actuated fastening options. Buyers can compare the listed gauge, length, collation, finish and tool system before choosing a product for a job or stocking a professional supply program.
Concrete and masonry fasteners are selected for the base material, attached component and installation method. KYA listings include nailer fasteners in several gauges as well as collated products. Confirm that the fastener format, collation and dimensions match the tool manual and the project specification. Where direct-drive masonry nails are specified, prepare the substrate and install only as directed by the fastener and tool manufacturers.

The category includes 12, 14 and 15 gauge products, with examples for ST25, ST32, ST38, HT50 and FST nailer systems, plus plastic- and wire-collated concrete nails. Individual listings identify their own length, diameter, finish and tool fit. Review the product page before ordering because specifications differ across nail types.

Depending on the selected fastener and tool, concrete nails can be used for attaching drywall track, wood components, wall ties and other suitable materials to concrete or steel. They are also used in construction tasks such as formwork and temporary barriers when the approved fastening method calls for them. Always verify base-material limits, edge distance and required embedment with the applicable instructions.

For a quotation, specify the tool model or fastening system, nail gauge and length, collation, finish, required quantity and packaging. Include the base material and application so the requested product can be checked against the installation requirements.
They fasten selected materials such as track or wood components to concrete, masonry or steel when the nail and installation method are specified for that base material.
The category includes 12, 14 and 15 gauge products, with lengths varying by fastener and tool system. Check each product listing for its exact dimensions.
No. Collation, nail dimensions and tool model must match. Confirm compatibility in the nailer manual and the product listing before purchase.
Some listed products are intended for concrete and some for concrete or steel applications. Follow the specific product and tool guidance for the base material.
Include the item or tool system, gauge, length, collation, finish, pack size and order quantity. This helps confirm the requested specification.
FURNITURE ACCESSORIES
OFFICE SUPPLIES
PACKAGING MATERIAL