Home / Tools / Concrete Nailer / Pneumatic 14 Gauge Heavy Duty Concrete T Nailer ST64
Share to:

Pneumatic 14 Gauge Heavy Duty Concrete T Nailer ST64

Pneumatic 14 Gauge Heavy Duty Concrete T Nailer ST64
WEIGHT:2.81kgs(6.20lbs) Aluminum body
DIMENSIONS:310mm x 95mm x 311mm
LOAD CAPACITY:100 pcs
OPERATING PRESSURE:70-120psi(5-8.3bar)

  • ST64
  • KYA
  • KYA-ST64
  • 2.81kgs (6.20lbs)
  • 70-120psi (5-8.3bar)
  • 100 Nails
  • 14 Gauge Concrete T Nails
Quantity:
Overview
st64

Pneumatic 14 Gauge Heavy Duty Concrete T Nailer ST64

The 14 Gauge Heavy Duty Concrete T Nailer also features an adjustable exhaust, quick release nose for easy jam clearing, and safety to prevent accidental firing. Applications include furring strips, plywood to concrete nailing, wire lath installation, steel banding, decking, fencing, sub flooring, and more.

Shoots 14 gauge T-nails from 3/4 inch to 2-1/2 inch long.

● Rubber hand grip for added comfort .

● Ergonomically engineered body results in a rugged, comfortable, and lightweight tool great for extended use.

● Quick-release nosepiece for fast clearing of jams.

● Heavy-duty light weight aluminum body.

● Adjustable exhaus.

Product Description


Model: Pneumatic 14 Gauge Heavy Duty Concrete T Nailer ST64
Air Tool Type: Air Nailer
Tool Diamensions: 310mm x 95mm x 311mm (12-3/14" x 3-3/4" x 12-1/4")
Net Tool Weight: 2.81kgs(6.20 lbs)
Body Material: Aliminum Body
Operate Pressure: 70-120psi (5-8.3bar)
Load Capacity: 100 nails
Nails Type: 14 Gauge Concrete T Nails
Nails Head Diameter: 0.256"(6.5mm) x 0.070"(1.8mm)
Nails Shank Diameter: 0.086"(2.2mm)
Nails Length: 3/4"(18mm)~2-1/2"(64mm)


st64-1

Concrete Nails

14 Gauge Concrete T Nails
Nails Head Diameter: 0.256"(6.5mm) x 0.070"(1.8mm)
Nails Shank Diameter: 0.086"(2.2mm)
Nails Length: 3/4"(18mm)~2-1/2"(64mm)
Features

 Aluminum magazine with strong and light weight body.

 Adjust knob for either sequential or contact trip fire.

 Soft grip handle reduces fatigue.

 Tool free depth of drive adjustment for exact setting of nails head.

 Quick-release nosepiece for fast clearing of jams.

Application

Great for applications fastening wood to concrete or steel, such as furring strips, wire lathe installation, steel banding, decking, fencing, and subflooring.

ST64 APPLICATION

Our Services
No.   Symptom Problems Solutions
1.1 Air Leak  Air leak in the cylinder cap when tools don't work  1.Loose head valve piston seal or o-rings . Check and replace the head valve piston set
2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap  Check and replace o-ring or cylinder cap gasket under the cylinder cap
1.2 Air leak in Trigger area  when tools don't work 1.Damaged o-ring in trigger valve  Check and replace  o-ring
2.Damaged o-ring in trigger valve stem  Check and replace o-ring
3.Dirt in the trigger valve Check and clean the trigger valve
1.3 Air leak in cylinder cap when tools are working  1.Damaged head valve piston o-rings Check and replace  o-rings
2.Damaged seal under cylinder cap  Check and replace seal
1.4 Air leak in nose when tools are working  1.Worn or damaged bumper Check and replace bumper
2.Loose driver(piston unit) thread Check and replace driver(piston unit) 
1.5 Air leak in Trigger area when tools are working 1.Worn or damaged trigger valve head Check and replace trigger valve head
2.Damaged head valve piston o-rings Check and replace head valve piston o-rings
2 Failed to get driver(piston unit) back to the correct position completely. 1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled. Straighten the driver(piston unit)  or verify driver guide(nose) and magazine  
2.Worn or damaged nozzle   Check and replace nozzle 
3.The space between piston o-ring and  cylinder is too tight. Check if the cylinder is adequate lubrication or replace the o-ring on the piston.
3 Work weakly and sluggishly 1. Worn or damaged  piston o-ring  Check and replace piston o-ring 
2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings   Place 2 or 6 drops of oil on o-rings or replace  head valve piston o-rings
3.Dirt in the nozzle Check and clean the nozzle
4 Tool jams frequently 1.Damaged or Worn driver (piston unit) Check and replace driver (piston unit)
2.Damaged or Worn driver guide (nose) Check and replace  driver guide (nose)
3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big Check and replace driver guide cover 
5 Nail can not be shot 1. Driver (piston unit) can't return to the correct position. Refer to no. 1  Symptom
2.Driver guide(nose) can not match magazine well Check and correct the position between driver guide(nose) and magazine 
3.Worn or damaged nail pusher compression spring  Check and replace nail pusher compression spring 

WELCOME TO CONTACT US

Contact us

TOOLS

FASTENERS

FURNITURE ACCESSORIES

OFFICE SUPPLIES

PACKAGING MATERIAL

WIRE

QUICK LINKS

Copyright © 2020. Changzhou KYA Fasteners Co.,Ltd. All rights reserved.