Home / Tools / Coil Nailer / NP45 Pneumatic Nail Puller for recycle pallet, Nail remover, Air Nail Punch
NP45 Pneumatic Nail Puller for recycle pallet, Nail remover, Air Nail Punch NP45 Pneumatic Nail Puller for recycle pallet, Nail remover, Air Nail Punch


NP45 Pneumatic Nail Puller for recycle pallet, Nail remover, Air Nail Punch

Share to:
sharethis sharing button
NP45 Pneumatic Nail Puller WEIGHT:1.27kgs DIMENSIONS:275mm x 62mm x 273mm OPERATING PRESSURE:70-120psi(5-8.3bar)
  • NP45

  • KYA

  • KYA-NP45

  • 1.27kgs

  • 70-120psi



   NP45 Pneumatic Nail Puller is one powerhouse of a tool so you can throw any type of wood at it. Drive nails out of the work pieces quietly, efficiently and with precision while maintaining the integrity and quality of the wood.

● Sufficiently powerful to push nails out of hard woods.

● Quiet, efficient and accurate.

● All metal body makes for sturdy and durable tool.

● Rubberized ergonomic grip for fatigueless operation.

● Light weight die cast Aluminum body.

● Slim elongated nose gets into tight spaces.

Pneumatic Nail Puller NP45   NP45 Nail RemoverAir Nail Punch NP45

Product Description

Model: NP45 Pneumatic Nail Puller
Air Tool Type: Air Nailer
Tool Diamensions: 230mmx96mmx357mm(9-1/6"x3-25/32"x14-1/16")

Net Tool Weight:


Body Material:

Aluminum Body
Operate Pressure: 70-120psi (5-8.3bar)
Load Capacity: 50 Nails
Fasteners Type: 0 Degree flat plastic sheet concrete coil nails
Fasteners Shank Diameter: 0.114"(2.9mm)-0.161"(4.10mm)
Fasteners Length: 1"(25mm)-2-1/2"(65mm)
Fasteners Shank Type: Smooth,Screw,Ring


 Light weight and well balanced.

 High durability driver and bumper for long life.

 Convenient to use with efficiency, save time.

 Simple internal structure for easy maintenance.


Remove nails from floorboards, weatherboards, fiber sheets, skids, pallets, boards, barn lumber, sheathing and wooden decks, Works with different types of soft and hard woods including Pine, Poplar, Chestnut, Sycamore, Oak, Locust, Hickory, Osage orange, White Oak and Maple. 



No.   Symptom Problems Solutions
1.1 Air Leak  Air leak in the cylinder cap when tools don't work  1.Loose head valve piston seal or o-rings . Check and replace the head valve piston set
2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap  Check and replace o-ring or cylinder cap gasket under the cylinder cap
1.2 Air leak in Trigger area  when tools don't work 1.Damaged o-ring in trigger valve  Check and replace  o-ring
2.Damaged o-ring in trigger valve stem  Check and replace o-ring
3.Dirt in the trigger valve Check and clean the trigger valve
1.3 Air leak in cylinder cap when tools are working  1.Damaged head valve piston o-rings Check and replace  o-rings
2.Damaged seal under cylinder cap  Check and replace seal
1.4 Air leak in nose when tools are working  1.Worn or damaged bumper Check and replace bumper
2.Loose driver(piston unit) thread Check and replace driver(piston unit) 
1.5 Air leak in Trigger area when tools are working 1.Worn or damaged trigger valve head Check and replace trigger valve head
2.Damaged head valve piston o-rings Check and replace head valve piston o-rings
2 Failed to get driver(piston unit) back to the correct position completely. 1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled. Straighten the driver(piston unit)  or verify driver guide(nose) and magazine  
2.Worn or damaged nozzle   Check and replace nozzle 
3.The space between piston o-ring and  cylinder is too tight. Check if the cylinder is adequate lubrication or replace the o-ring on the piston.
3 Work weakly and sluggishly 1. Worn or damaged  piston o-ring  Check and replace piston o-ring 
2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings   Place 2 or 6 drops of oil on o-rings or replace  head valve piston o-rings
3.Dirt in the nozzle Check and clean the nozzle
4 Tool jams frequently 1.Damaged or Worn driver (piston unit) Check and replace driver (piston unit)
2.Damaged or Worn driver guide (nose) Check and replace  driver guide (nose)
3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big Check and replace driver guide cover 
5 Nail can not be shot 1. Driver (piston unit) can't return to the correct position. Refer to no. 1  Symptom
2.Driver guide(nose) can not match magazine well Check and correct the position between driver guide(nose) and magazine 
3.Worn or damaged nail pusher compression spring  Check and replace nail pusher compression spring 


Apply Our Best Quotation








Copyright ©  2024 Changzhou KYA Fasteners Co.,Ltd. All rights reserved.