Home / Tools / Pneumatic Staplers / 20 Gauge 7/16 Inch Wide Crown Air Stapler J1016/435
Share to:

20 Gauge 7/16 Inch Wide Crown Air Stapler J1016/435

20 Gauge 7/16 Inch Wide Crown Air Stapler J1016/435
WEIGHT:1.10 kgs (2.42 lbs)
DIMENSIONS:150mm x 45mm x 220mm
LOAD CAPACITY:157 pcs
OPERATING PRESSURE:60-100psi(4-7bar)

  • J1016/435
  • KYA
  • KYA-J1016/435
  • 1.10kgs
  • 60-100psi (4-7bar)
  • 157 staples
  • 20 Guage 10J Series Fine Wire Staples
Quantity:
Overview
j1016-435

20 Gauge 7/16 Inch Wide Crown Air Stapler J1016/435

20 Gauge 7/16 Inch Wide Crown Air Stapler J1016/435. This fine wire staple gun is ideal for upholstery, automotive vinyl and other fabric projects. 

Comfortable rubber grip.

● Lengthened thin muzzle design, operation more flexible and convenient.

● Ultra-lightweight at 2.42 lbs.

● Simple internal structure and easy maintenance.

● Quick release magazine for easy loading.

Product Description


Model: 20 Gauge 7/16 Inch Wide Crown Air Stapler J1016/435
Air Tool Type: Air Stapler
Tool Diamensions: 150mm x 45mm x 220mm
Net Tool Weight: 1.10kgs (2.42 lbs)
Operate Pressure: 60-100psi (4-7bar)
Load Capacity: 157 staples
Staples Type: 20 Guage 10J Series Fine Wire Staples
Staples Crown: 7/16"(11.2mm)
Staples Shank Diameter: 0.050"(1.26mm) x 0.022"(0.55mm)
Staples Length: 1/6"(4mm)~5/8"(16mm)


80 series staples

20 Guage 10J Series Fine Wire Staples
Staples Crown:7/16"(11.20mm)
Staples Shank Diameter:0.050"(1.26mm) x 0.022"(0.55mm)
Staples Length:1/6"(4mm)~5/8"(16mm)
Features

 Lightweight body for easy operation.

 Low noisy have good feedback from suctoerm.

 Powerful strength and excellent durability.

 Same as J10/16-435

Application

Furniture manke and repair.

Cloth and wood connection.

Picture frams.

Decoration.

F30

Our Services
No.   Symptom Problems Solutions
1.1 Air Leak  Air leak in the cylinder cap when tools don't work  1.Loose head valve piston seal or o-rings . Check and replace the head valve piston set
2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap  Check and replace o-ring or cylinder cap gasket under the cylinder cap
1.2 Air leak in Trigger area  when tools don't work 1.Damaged o-ring in trigger valve  Check and replace  o-ring
2.Damaged o-ring in trigger valve stem  Check and replace o-ring
3.Dirt in the trigger valve Check and clean the trigger valve
1.3 Air leak in cylinder cap when tools are working  1.Damaged head valve piston o-rings Check and replace  o-rings
2.Damaged seal under cylinder cap  Check and replace seal
1.4 Air leak in nose when tools are working  1.Worn or damaged bumper Check and replace bumper
2.Loose driver(piston unit) thread Check and replace driver(piston unit) 
1.5 Air leak in Trigger area when tools are working 1.Worn or damaged trigger valve head Check and replace trigger valve head
2.Damaged head valve piston o-rings Check and replace head valve piston o-rings
2 Failed to get driver(piston unit) back to the correct position completely. 1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled. Straighten the driver(piston unit)  or verify driver guide(nose) and magazine  
2.Worn or damaged nozzle   Check and replace nozzle 
3.The space between piston o-ring and  cylinder is too tight. Check if the cylinder is adequate lubrication or replace the o-ring on the piston.

Apply Our Best Quotation

TOOLS

FASTENERS

FURNITURE ACCESSORIES

OFFICE SUPPLIES

PACKAGING MATERIAL

WIRE

QUICK LINKS

Copyright © 2020. Changzhou KYA Fasteners Co.,Ltd. All rights reserved.