| Quantity: | |
|---|---|
CN70PAL Pneumatic Coil Nailer is designed for high-speed nailing in automated pallet machines, pallet production lines, timber frame production lines, drum assembly and export wooden box manufacturing. Built with a durable aluminum body, automatic remote control trigger valve, special nose design and built-in silencer, this pneumatic coil nailer supports efficient, low-noise and continuous nailing in industrial automation systems.
KYA CN70PAL uses 15 degree jumbo coil nails with 3000 nails load capacity, 45mm to 70mm nail length, 2.3mm to 2.9mm shank diameter and 5.0mm to 7.0mm head diameter. It is suitable for smooth shank, screw shank and ring shank coil nails, helping automated pallet machine users achieve stable countersinking and fast cycle times.
CN70PAL automated pallet coil nailer is engineered for machine-mounted nailing stations where speed, durability and repeatable firing performance are critical. The special nose structure helps reduce cycle time, while the remote trigger valve supports integration with automated pallet assembly equipment.
Built for automation: Designed for automated pallet machines and timber frame production lines.
3000 nails capacity: Uses jumbo coil nails to reduce reload frequency in high-volume production.
15 degree jumbo coil nail support: Compatible with 45mm to 70mm coil nails for pallet and timber applications.
Aluminum body: Durable frame and cylinder cap support professional production use.
Built-in silencer: Helps reduce noise during continuous industrial nailing.
Downward exhaust: Directs exhaust away from the operator and workpiece for cleaner operation.
| Specification | Details |
|---|---|
| Product Name | CN70PAL Pneumatic Coil Nailer For Automated Pallet Machine |
| Model | CN70PAL |
| Brand | KYA |
| Code | KYA-CN70PAL |
| Air Tool Type | Air Nailer / Pneumatic Coil Nailer / Automated Pallet Nailer |
| Net Tool Weight | 3.02kg / 6.66lbs |
| Body Material | Aluminum |
| Operating Pressure | 70–120psi / 5–8.3bar |
| Load Capacity | 3000 nails |
| Fasteners Type | 15 Degree Jumbo Coil Nails |
| Fastener Head Diameter | 0.197 inch to 0.276 inch / 5.0mm to 7.0mm |
| Fastener Shank Diameter | 0.091 inch to 0.113 inch / 2.3mm to 2.9mm |
| Fastener Length | 1-3/4 inch to 2-3/4 inch / 45mm to 70mm |
| Fastener Shank Type | Smooth, Screw, Ring |
| Trigger Design | Automatic remote control trigger valve |
| Main Applications | Automated pallet machines, pallet assembly, drums, export wooden boxes and timber frame production lines |
| Fastener Requirement | CN70PAL Compatibility | Buying Note |
|---|---|---|
| Coil Angle | 15 degree jumbo coil nails | Use 15 degree jumbo coil nails for correct feeding and firing. |
| Nail Length | 45mm to 70mm / 1-3/4 inch to 2-3/4 inch | Select nail length according to pallet board thickness and required penetration depth. |
| Shank Diameter | 2.3mm to 2.9mm / 0.091 inch to 0.113 inch | Confirm nail diameter before bulk ordering to avoid feeding or driving issues. |
| Head Diameter | 5.0mm to 7.0mm / 0.197 inch to 0.276 inch | Use compatible head size for reliable magazine feeding and countersinking. |
| Shank Type | Smooth, screw, ring | Use ring shank or screw shank where stronger pallet holding power is required. |
| Coil Capacity | 3000 nails | Jumbo coil format reduces downtime in automated nailing operations. |
Powerful pallet nailing: Designed to countersink nails into hard oak pallets and timber materials.
Durable aluminum frame: Aluminum body and cylinder cap support demanding industrial use.
Remote trigger valve: Helps integrate the nailer into automated pallet machines and robotic fixtures.
Special nose design: Supports fast cycle times and consistent nail placement in production lines.
Built-in silencer: Reduces noise levels during repeated firing.
Downward exhaust: Improves workstation cleanliness by directing exhaust away from the work area.
CN70PAL Pneumatic Coil Nailer is designed for automated pallet production and timber fastening systems that require high-speed, repeatable and reliable nailing. It is suitable for production cells where a machine-mounted pneumatic nailer is required instead of a handheld coil nailer.
Automated pallet machine operations
Pallet assembly and pallet repair production lines
Drum assembly and export wooden box manufacturing
Timber frame production lines
Industrial wooden packaging and crate assembly
Automated nail driving stations and machine-mounted nailing fixtures
| Selection Point | CN70PAL Requirement | Recommendation |
|---|---|---|
| Automation Use | Machine-mounted automated pallet nailing | Choose CN70PAL when a remote-trigger coil nailer is required for automated production. |
| Air Pressure | 70–120psi / 5–8.3bar | Use clean and stable compressed air within the recommended pressure range. |
| Nail Capacity | 3000 nails jumbo coil | Use jumbo coils for long production runs with fewer reload stops. |
| Nail Type | 15 degree coil nails, 45–70mm length | Match nail length, shank type and finish to pallet material and strength requirements. |
| Production Material | Hard oak pallets, timber frames, wooden boxes and drums | Use ring shank or screw shank nails where higher withdrawal resistance is needed. |
| No. | Symptom | Problem | Solution |
|---|---|---|---|
| 1.1 | Air leak in cylinder cap when tool is idle | Loose head valve piston seal or o-rings | Check and replace head valve piston set. |
| 1.1 | Air leak in cylinder cap when tool is idle | Worn or damaged o-ring or cylinder cap gasket | Check and replace o-ring or cylinder cap gasket. |
| 1.2 | Air leak in trigger area when tool is idle | Damaged o-ring in trigger valve | Check and replace o-ring. |
| 1.2 | Air leak in trigger area when tool is idle | Damaged o-ring in trigger valve stem | Check and replace o-ring. |
| 1.2 | Air leak in trigger area when tool is idle | Dirt in the trigger valve | Check and clean the trigger valve. |
| 1.3 | Air leak in cylinder cap when tool is working | Damaged head valve piston o-rings | Check and replace o-rings. |
| 1.3 | Air leak in cylinder cap when tool is working | Damaged seal under cylinder cap | Check and replace seal. |
| 1.4 | Air leak in nose when tool is working | Worn or damaged bumper | Check and replace bumper. |
| 1.4 | Air leak in nose when tool is working | Loose driver piston unit thread | Check and replace driver piston unit. |
| 1.5 | Air leak in trigger area when tool is working | Worn or damaged trigger valve head | Check and replace trigger valve head. |
| 1.5 | Air leak in trigger area when tool is working | Damaged head valve piston o-rings | Check and replace head valve piston o-rings. |
| 2 | Driver piston unit fails to return to correct position | Driver piston unit is not straight or driver guide nose is misassembled | Straighten driver piston unit or verify driver guide nose and magazine. |
| 2 | Driver piston unit fails to return to correct position | Worn or damaged nozzle | Check and replace nozzle. |
| 2 | Driver piston unit fails to return to correct position | Tight space between piston o-ring and cylinder | Check cylinder lubrication or replace piston o-ring. |
| 3 | Tool works weakly or sluggishly | Worn or damaged piston o-ring | Check and replace piston o-ring. |
| 3 | Tool works weakly or sluggishly | Inadequate lubrication or tight head valve piston o-rings | Lubricate with 2–6 drops of oil or replace head valve piston o-rings. |
| 3 | Tool works weakly or sluggishly | Dirt in the nozzle | Check and clean the nozzle. |
| 4 | Tool jams frequently | Damaged or worn driver piston unit | Check and replace driver piston unit. |
| 4 | Tool jams frequently | Damaged or worn driver guide nose | Check and replace driver guide nose. |
| 4 | Tool jams frequently | Bent driver guide cover, causing large gap with driver guide | Check and replace driver guide cover. |
| 5 | Nail cannot be shot | Driver piston unit fails to return to correct position | Refer to driver piston return-position checks. |
| 5 | Nail cannot be shot | Driver guide nose misaligned with magazine | Correct alignment between driver guide nose and magazine. |
| 5 | Nail cannot be shot | Worn or damaged nail pusher compression spring | Check and replace nail pusher compression spring. |
The CN70PAL is used for high-speed nailing in automated pallet machines, timber frame production lines, pallet assembly, drum assembly and export wooden box manufacturing.
CN70PAL uses 15 degree jumbo coil nails with 45mm to 70mm length, 2.3mm to 2.9mm shank diameter, 5.0mm to 7.0mm head diameter and smooth, screw or ring shank options.
Yes. The automatic remote control trigger valve and special nose design make CN70PAL suitable for automated pallet machines and timber frame production lines.
The CN70PAL load capacity is 3000 nails, which helps reduce reload frequency during automated and high-volume pallet nailing operations.
The recommended operating pressure is 70–120psi / 5–8.3bar. Use clean, dry and stable compressed air for consistent firing and longer tool life.
Yes. The CN70PAL is designed to be powerful enough for countersinking nails into hard oak pallets and similar timber materials when the correct nails and air pressure are used.
The built-in silencer helps reduce noise during repeated firing, which is useful for pallet production lines and automated nailing workstations.
Yes. KYA can provide compatible 15 degree jumbo coil nails, including smooth, screw and ring shank options, as well as tool specifications, spare parts, sample support, bulk pricing and shipping guidance.
KYA Fasteners supplies pneumatic coil nailers, automated pallet nailers, jumbo coil nails, pallet nails, pneumatic tools, staples, hog rings, wire products and industrial fastening solutions for global customers. For pallet and timber frame manufacturing, KYA provides machine-mounted nailers, compatible nails and technical support.
Contact KYA to get factory-direct pricing for CN70PAL Pneumatic Coil Nailer For Automated Pallet Machine, including tool specifications, jumbo coil nail compatibility, spare parts, sample support, bulk order quantity and shipping schedule.
