21 Gauge 1/2 Inch Wide Crown Pneumatic Stapler 8016
Product Description
21 Gauge 1/2 Inch Wide Crown Pneumatic Stapler 801621 Gauge 1/2 Inch Wide Crown Pneumatic Stapler 8016is a top of the line professional grade pneumatic fine wire stapler. It can be used for interior decorative finishes, automotive vinyl etc. ● [Light in Weight] Compact and lightweight design ● [Longevity of Service] It's an industrial upholstery stapler, with a durable driver and a bumper for long life. ● [Quiet and Clean] Built-in silencer makes a soft noise, rear exhaust keeps oil off fabric and face. ● [Comfortable Grip] Designed to be user-friendly, its comfortable rubber grip can reduce vibration and fatigue and increase productivity. ● [Compatible Fastener] 21 gauge 1/2" crown 80 series 1/4" to 5/8" (6 mm-16 mm) length staples |
| Model: | 21 Gauge 1/2 Inch Wide Crown Pneumatic Stapler 8016 |
| Air Tool Type: | Air Stapler |
| Tool Diamensions: | 145mm x 45mm x 220mm |
| Net Tool Weight: | 0.94kgs (2.07 lbs) |
| Operate Pressure: | 70-90psi |
| Load Capacity: | 150 staples |
| Staples Type: | 21 Guage 80 Series Fine Wire Staples |
| Staples Crown: | 1/2"(12.8mm) |
| Staples Shank Diameter: | 0.037"(0.95mm) x 0.025"(0.65mm) |
| Staples Length: | 1/6"(4mm)~5/8"(16mm) |
| 21 Guage 80 Series Fine Wire Staples |
| Staples Crown:1/2"(12.8mm) |
| Staples Shank Diameter:0.037"(0.95mm) x 0.025"(0.65mm) |
| Staples Length:1/6"(4mm)~5/8"(16mm) |
Fine wire stapler with lengthened thin muzzle design to improve flexibility .
Professional-grade standard to ensure powerful nailing and high efficiency of the stapler .
The stronger and more durable striker is made of ultra-durable metal .
Rubber molded handle and ergonomic gun body design for ease of operation .
Modern design with silver "champagne" colorclear.
Furniture manke and repair.
Cloth and wood connection.
Picture frams.
Decoration.
| No. | Symptom | Problems | Solutions | |
| 1.1 | Air Leak | Air leak in the cylinder cap when tools don't work | 1.Loose head valve piston seal or o-rings . | Check and replace the head valve piston set |
| 2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap | Check and replace o-ring or cylinder cap gasket under the cylinder cap | |||
| 1.2 | Air leak in Trigger area when tools don't work | 1.Damaged o-ring in trigger valve | Check and replace o-ring | |
| 2.Damaged o-ring in trigger valve stem | Check and replace o-ring | |||
| 3.Dirt in the trigger valve | Check and clean the trigger valve | |||
| 1.3 | Air leak in cylinder cap when tools are working | 1.Damaged head valve piston o-rings | Check and replace o-rings | |
| 2.Damaged seal under cylinder cap | Check and replace seal | |||
| 1.4 | Air leak in nose when tools are working | 1.Worn or damaged bumper | Check and replace bumper | |
| 2.Loose driver(piston unit) thread | Check and replace driver(piston unit) | |||
| 1.5 | Air leak in Trigger area when tools are working | 1.Worn or damaged trigger valve head | Check and replace trigger valve head | |
| 2.Damaged head valve piston o-rings | Check and replace head valve piston o-rings | |||
| 2 | Failed to get driver(piston unit) back to the correct position completely. | 1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled. | Straighten the driver(piston unit) or verify driver guide(nose) and magazine | |
| 2.Worn or damaged nozzle | Check and replace nozzle | |||
| 3.The space between piston o-ring and cylinder is too tight. | Check if the cylinder is adequate lubrication or replace the o-ring on the piston. | |||