KYA CN100EPAL Pneumatic Coil Nailer is a heavy-duty air coil nailer designed for Euro pallet manufacturing, wooden crate assembly, timber packaging, pallet repair, industrial woodworking, and high-volume fastening production. It drives 15 degree wire-collated E-PAL nails from 70mm to 90mm, with 0.138 inch / 3.5mm shank diameter and 150-300 nail magazine capacity.
Built with an aluminum or magnesium body, the CN100EPAL coil nail gun balances power, durability, and operator comfort. It operates at 70-120 psi / 5-8.3 bar and is powerful enough to countersink nails into hard oak pallets. The rubber comfort grip, auxiliary handle, impact-resistant magazine, protective guard, downward exhaust, and built-in silencer make it suitable for continuous pallet production lines.
The following specifications help pallet factories, crate manufacturers, timber packaging suppliers, nailer distributors, woodworking equipment buyers, and fastener importers confirm tool size, body material, operating pressure, nail capacity, compatible fastener type, nail diameter, nail length, and shank compatibility before ordering.
| Model | CN100EPAL Pneumatic Coil Nail Gun |
| Product Type | Pneumatic Coil Nailer / Air Coil Nail Gun / E-PAL Pallet Nailer |
| Tool Type | Air Nailer |
| Dimensions | 457mm x 156mm x 336mm / 18" x 6-1/8" x 13-1/4" |
| Weight | 5.35kg / 11.66lbs Aluminum, 5.11kg / 11.26lbs Magnesium |
| Body Material | Aluminum or Magnesium |
| Operating Pressure | 70-120 psi / 5-8.3 bar |
| Load Capacity | 150-300 Nails |
| Fastener Type | 15 Degree Collated Wire E-PAL Nails |
| Nail Head Diameter | 0.338" / 8.6mm |
| Nail Shank Diameter | 0.138" / 3.5mm |
| Nail Length | 2-3/4" / 70mm to 3-1/2" / 90mm |
| Nail Shank Type | Smooth, Screw, Ring |
| Main Applications | Euro pallet construction, wooden crate assembly, timber packaging, pallet repair, industrial woodworking |
| Powerful Pallet Nailing | Designed to countersink E-PAL nails into hard oak pallets and heavy-duty timber packaging materials. |
| Aluminum or Magnesium Body | Durable body options help balance strength, weight, and operator handling for industrial use. |
| 150-300 Nail Capacity | Large magazine capacity reduces reloading frequency in high-volume pallet and crate production. |
| Comfort Grip and Auxiliary Handle | Rubber grip and auxiliary handle improve control and reduce operator fatigue during repeated fastening. |
| Impact-Resistant Magazine | Built for demanding industrial environments where durability and stable feeding are important. |
| Downward Exhaust and Silencer | Downward directional exhaust helps reduce debris blowback, while the built-in silencer helps lower noise levels. |
| Balancer-Friendly Design | Well-balanced structure is suitable for production lines using tool balancers. |
CN100EPAL pneumatic coil nailer is built for high-volume fastening in pallet factories, export crate workshops, wooden packaging lines, timber processing plants, logistics packaging suppliers, and industrial woodworking production.
| Euro Pallet Construction | Used for heavy-duty Euro pallet assembly with 15 degree E-PAL nails. |
| Wooden Crate Assembly | Suitable for export crate, shipping crate, and heavy wooden packaging production. |
| Timber Packaging | Supports fastening in timber packaging for transport, storage, and logistics applications. |
| Industrial Woodworking | Used for repeated heavy-duty fastening in industrial woodworking and production-line environments. |
| Pallet Repair | Suitable for pallet repair and reinforcement when compatible E-PAL nails are used. |
CN100EPAL is designed for 15 degree wire-collated E-PAL nails. Buyers should confirm nail length, shank diameter, head diameter, shank type, collation angle, nail material, and pallet specification before bulk use.
| Nail Type | 15 Degree Wire-Collated E-PAL Nails |
| Nail Length | 70mm-90mm / 2-3/4"-3-1/2" |
| Shank Diameter | 3.5mm / 0.138" |
| Head Diameter | 8.6mm / 0.338" |
| Shank Types | Smooth, Screw, Ring |
The following troubleshooting guide helps maintenance teams identify common pneumatic coil nailer issues such as air leaks, weak performance, driver return failure, tool jams, and feeding problems.
| No. | Symptom | Possible Problem | Solution |
|---|---|---|---|
| 1.1 | Air leak in cylinder cap when tool is idle | Loose head valve piston seal or o-rings | Check and replace head valve piston set |
| 1.1 | Air leak in cylinder cap when tool is idle | Worn or damaged o-ring or cylinder cap gasket | Check and replace o-ring or cylinder cap gasket |
| 1.2 | Air leak in trigger area when tool is idle | Damaged o-ring in trigger valve | Check and replace o-ring |
| 1.2 | Air leak in trigger area when tool is idle | Damaged o-ring in trigger valve stem | Check and replace o-ring |
| 1.2 | Air leak in trigger area when tool is idle | Dirt in trigger valve | Check and clean trigger valve |
| 1.3 | Air leak in cylinder cap when tool is working | Damaged head valve piston o-rings | Check and replace o-rings |
| 1.3 | Air leak in cylinder cap when tool is working | Damaged seal under cylinder cap | Check and replace seal |
| 1.4 | Air leak in nose when tool is working | Worn or damaged bumper | Check and replace bumper |
| 1.4 | Air leak in nose when tool is working | Loose driver piston unit thread | Check and replace driver piston unit |
| 1.5 | Air leak in trigger area when tool is working | Worn or damaged trigger valve head | Check and replace trigger valve head |
| 1.5 | Air leak in trigger area when tool is working | Damaged head valve piston o-rings | Check and replace head valve piston o-rings |
| 2 | Driver piston unit fails to return fully | Driver piston unit not straight or misassembled driver guide nose | Straighten driver or verify driver guide and magazine |
| 2 | Driver piston unit fails to return fully | Worn or damaged nozzle | Check and replace nozzle |
| 2 | Driver piston unit fails to return fully | Tight piston o-ring and cylinder space | Check cylinder lubrication or replace piston o-ring |
| 3 | Weak or sluggish performance | Worn or damaged piston o-ring | Check and replace piston o-ring |
| 3 | Weak or sluggish performance | Inadequate lubrication or tight head valve piston o-rings | Apply 2-6 drops of oil or replace head valve piston o-rings |
| 3 | Weak or sluggish performance | Dirt in nozzle | Check and clean nozzle |
| 4 | Frequent tool jams | Damaged or worn driver piston unit | Check and replace driver piston unit |
| 4 | Frequent tool jams | Damaged or worn driver guide nose | Check and replace driver guide nose |
| 4 | Frequent tool jams | Bent driver guide cover causing large gap | Check and replace driver guide cover |
| 5 | Nail cannot be shot | Driver piston unit fails to return | Refer to driver return troubleshooting |
| 5 | Nail cannot be shot | Driver guide nose misaligned with magazine | Correct position between driver guide and magazine |
| 5 | Nail cannot be shot | Worn or damaged nail pusher compression spring | Check and replace nail pusher compression spring |
For stable operation, keep the tool properly lubricated, use clean dry compressed air, confirm air pressure within 70-120 psi, clean the magazine and nose regularly, check the driver and o-rings for wear, and use compatible 15 degree wire-collated E-PAL nails. Incorrect nail size, poor lubrication, dirty air supply, or worn driver parts can increase jamming and reduce tool performance.
KYA Fasteners supplies CN100EPAL pneumatic coil nailers, E-PAL pallet nailers, coil nail guns, pallet nails, E-PAL nails, pneumatic nailers, industrial staples, hog rings, fasteners, and fastening solutions for global B2B customers. For pallet factories, crate manufacturers, timber packaging producers, tool dealers, fastener importers, and industrial woodworking buyers, KYA can support tool selection, compatible nail matching, sample requests, spare parts consultation, bulk quotation, and export supply.
Contact KYA Fasteners to request CN100EPAL Pneumatic Coil Nailer specifications, compatible nail details, spare parts support, quotation, and shipping information.
It is used for Euro pallet construction, wooden crate assembly, timber packaging, pallet repair, and industrial woodworking applications.
It uses 15 degree wire-collated E-PAL nails from 70mm to 90mm long, with 0.138 inch / 3.5mm shank diameter and smooth, screw, or ring shank options.
The operating pressure is 70-120 psi / 5-8.3 bar.
The load capacity is 150-300 nails.
The CN100EPAL is available with an aluminum body weighing 5.35kg or a magnesium body weighing 5.11kg.
Yes. The tool is designed with enough power to countersink E-PAL nails into hard oak pallets.
It uses a rubber comfort grip, auxiliary handle, balanced structure, and optional balancer-friendly operation to improve handling during repeated pallet fastening.
Check whether the driver piston unit, driver guide nose, or driver guide cover is worn, damaged, bent, or misaligned. Also confirm nail compatibility, lubrication, and air pressure.
Check the piston o-ring, lubrication, head valve piston o-rings, nozzle cleanliness, air pressure, and compressed air supply quality.
Yes. KYA Fasteners can support compatible E-PAL nail selection, spare parts consultation, sample requests, quotation, and export supply.
